12-Ring Network Coordination Polymer——{[Cu(C_4N_2H_(10))_4]_2·H_4V_4O_(14)}_n Formed by Linking cyclo-[H_4V_4O_(14)]~(4-) with Cu(C_4N_2H_(10))~(2+)_4 Cation Clusters

IntroductionThe interest in polyoxometalates that are widelyused in medical chemistry, catalyst reactions, and ma-terial sciences stems from their complicated aggregatesformed by means of corner-, edge- and face-sha-ring[1—4]. The exploitation of new str…     

时滞差分系统基于两种度量的稳定性分析

本文建立了一些关于时滞差分系统（h0,h）稳定性（一致稳定性，渐近稳定性，一致渐近稳定性）的判定准则。在所得到的定理中，去除了△V为常负的限制，特别地，△V甚至可以恒为正，从而大大改进了已有结果，并更加便于应用。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

A New theory for evaluating the number density of inclusions in films

A new formulation derived from thermal characters of inclusions and host films for estimating laser induced damage threshold has been deduced. This formulation is applicable for dielectric films when they are irradiated by laser beam with pulse width longer than tens picoseconds. This formulation can interpret the relationship between pulse-width and damage threshold energy density of laser pulse obtained experimentally. Using this formulation, we can analyze which kind of inclusion is the most harmful inclusion. Combining it with fractal distribution of inclusions, we have obtained an equation which describes relationship between number density of inclusions and damage probability. Using this equation, according to damage probability and corresponding laser energy density, we can evaluate the number density and distribution in size dimension of the most harmful inclusions.     

标的资产服从几何分数布朗运动的期权定价

本文在M ogens B ladt和T ina H av iid R ydberg无市场假设,仅利用价格过程的实际概率的期权保险精算定价模型的基础上,得出了标的资产服从几何分数布朗运动的欧式期权定价公式,并说明了几何布朗运动是本文的一种特殊情况.     

中心—焦点区分问题的I l'yashenko算法

对二维平面系统的二维系统的中心焦点区分问题 ,I l'yashenko曾建议一个算法 ,本文给出此法的详细证明 .据此 ,我们讨论了区分问题在 Arnold意义下的代数可解性与不可解性     

约束装箱问题的混合遗传算法求解

本将最佳适应法和遗传算法相结合，提出了一种新的启发式混合遗传算法对具有时间约束的装箱问题进行求解，给出了具体的算法步骤，试算结果表明基于启发式算法的混合遗传算法适合于求解各种约束条件下的大规模装箱问题。     

多目标分数变分问题的对偶性

本文利用参数逼近在函数广义（F，ρ）－凸的条件下，建立了一类多目标式变分问题关于有效解的对偶理论。     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

On Two Measures of Problem Instance Complexity and their Correlation with the Performance of SeDuMi on Second-Order Cone Problems

We evaluate the practical relevance of two measures of conic convex problem complexity as applied to second-order cone problems solved using the homogeneous self-dual (HSD) embedding model in the software SeDuMi. The first measure we evaluate is Renegar's data-based condition measure C(d), and the second measure is a combined measure of the optimal solution size and the initial infeasibility/optimality residuals denoted by S (where the solution size is measured in a norm that is naturally associated with the HSD model). We constructed a set of 144 second-order cone test problems with widely distributed values of C(d) and S and solved these problems using SeDuMi. For each problem instance in the test set, we also computed estimates of C(d) (using Peña’s method) and computed S directly. Our computational experience indicates that SeDuMi iteration counts and log (C(d)) are fairly highly correlated (sample correlation R = 0.675), whereas SeDuMi iteration counts are not quite as highly correlated with S (R = 0.600). Furthermore, the experimental evidence indicates that the average rate of convergence of SeDuMi iterations is affected by the condition number C(d) of the problem instance, a phenomenon that makes some intuitive sense yet is not directly implied by existing theory.