Diffusion interaction and quantitative analysis of zinc dialkyldithiophosphate content in lube base oils in terahertz regime

We investigate the diffusion interaction and quantitative analysis of zinc dialkyldithiophosphate (ZDDP) mixed with lube base oil (LBO) at different concentrations using terahertz time-domain spectroscopy (THzTDS).When the concentration exceeds 6.78%,the characteristic absorption peaks exhibit significantly shift,and the absorption coefficient peak value is nonlinear against concentration.Moreover,the absorption coefficients of mixed samples follow the Beer’s law at a concentration below 6.78%.The quantitative analysis enables a strategy for monitoring the formulation of lubricating oil in real time.     

Scintillation reduction using multi-beam propagating technique in atmospheric WOCDMA system

We propose employing multi-beam propagating technology to mitigate the influence of atmospheric scintillation to the wireless optical code division multiple access (WOCDMA) system and then deduce the bit error rate (BER) formulas of systems in weak and strong scintillations,respectively.According to simulation experiment results,multi-beam propagation can improve the system performance very well compared with single-beam propagating technique.Moreover,the more beams we use,the better the performance we get.When the received optical power is-30 dBm,the BER of the system employing four beams is 5 and 1 dB lower than that of using single-beam propagating technique in weak and strong scintillations,respectively.     

碳化铝与水反应合成甲烷水合物的实验研究

 利用自行设计的高压气水合物实验装置,通过碳化铝与水反应成功合成了甲烷水合物。实验结果表明,碳化铝与水反应合成甲烷水合物的方法有效地解决了传统甲烷水合物模拟实验中甲烷气体引入问题;同时,碳化铝与水反应产生的甲烷及沉淀物能较好地模拟海洋环境中水合物形成的自然条件,为实验模拟甲烷水合物研究提供了一种新方法。利用此方法,对甲烷水合物合成与分解温度、压力条件及动力学过程进行了初步研究。     

线圈炮电枢电磁-热耦合仿真分析

 从麦克斯韦方程组和导热微分方程出发,导出了3维多级感应线圈炮电磁场、温度场分布的基本方程,并以电磁场和温度场有限元分析为基础,建立了3维有限元分析模型,忽略级间的相互影响,多级线圈炮中电枢温升可以等效为多个单级电枢的温升,运用通用有限元分析软件ANSYS的耦合计算流程,对单级感应线圈炮中电枢电磁场和温度场进行仿真。计算中考虑了材料物理参数随温度变化对温度场的影响。仿真结果表明：电枢内的温升主要分布在电枢的外表面和尾部;电枢的温度随着电容器组电压和电容增加而升高,这是因为总能量增大,电枢中涡流也增大,从而电枢的温度升高;电枢的触发位置和速度匹配关系,也会对电枢温升造成很大的影响;电枢的温度随着级数的增加逐渐升高,说明电枢在一定级数后达到了材料的熔点而被破坏。     

测量行波管电子注的法拉第筒的热分析

利用ANSYS软件对测量行波管电子注截面的法拉第筒探头进行了热分析研究.分析了在单脉冲情况下,测量各种直径的不同脉冲功率密度的电子注、不同脉冲宽度对法拉第筒温度的影响,研究了测量不同功率密度的电子注可以使用的脉冲宽度.结果表明,仅法拉第筒上的注斑区域温度迅速上升,温度梯度较大,其它部分温度基本不变,为保证法拉第筒能够持...     

混响室的概率统计分析方法及其蒙特卡罗模拟

 提出了一种研究混响室问题的理论分析方法,从理想混响室的离散概率模型出发,采用蒙特卡罗模拟来获得室内电磁场量及其相关物理量的概率统计特性。运用该方法获得了混响室内若干场量（均为归一化值）的概率密度函数、室内一段均匀无耗单导体传输线的负载平均耦合截面及负载电流响应模值的概率分布,所得结果与已有文献给出的结果（包括由解析公式计算或测量所得的结果）吻合良好。由于蒙特卡罗方法的普适性,采用该方法可以获得任意待分析参量的全部概率统计特性（只要样本数足够大）。同时该方法无需针对具体混响室进行,只要在其测试区域能较好地与理想混响室的基本概率模型相吻合,就能给出较精确的计算结果,且其计算量远远小于基于全波分析的蒙特卡罗方法。     

X射线CCD标定及模拟

 在北京同步辐射光源4B7B实验站上,采用透射光栅配X射线电荷耦合元件(CCD)的方法对单色光进行了检验,在优化高次谐波抑制方法后,开展了X射线CCD的灵敏度标定实验研究;在标定数据处理过程中,提出了等效曝光时间的概念,修正了快门开合造成的曝光时间误差。标定实验获得了100~1 500 eV能区CCD的灵敏度,补充了300~600 eV能区CCD灵敏度标定数据,验证了简化模型的正确性。     

The effect of surface morphology on the response of Fe2O3-loaded vanadium oxide nanotubes gas sensor

The effect of surface morphology on the response of an ethanol sensor based on vanadium nanotubes surface loaded with Fe₂O₃ nanoparticles (Fe₂O₃/VONTs) was investigated in this work. The particle size of Fe₂O₃ loaded on VONTs was varied by using novel citric acid-assisted hydrothermal method. In the synthesis progress, citric acid was used as a surfactant and chelate agent, which ensured the growth of a uniform Fe₂O₃ loading on the nanotubes surface. The ethanol sensing properties was then measured for these Fe₂O₃/VONTs at 230-300 °C. The results showed that the sensor response increased with the particles size and the loading amount of Fe₂O₃. It appears that the load of Fe₂O₃ on the VONTs surface increases the concentration of oxygen vacancies and decreases the concentration of free electrons. The effects of morphology on the sensor resistance were interpreted in terms of the Debye length and the difference in the number of active sites.     

Efficient scheme for the preparation of symmetric Dicke states via cross-Kerr nonlinearity

A scheme is proposed for generating maximally entangled Dicke states among four modes. The scheme only uses Kerr medium and homodyne measurements on coherent light fields, which can be efficiently made in quantum optical laboratories. The scheme can be generalized to produce maximally entangled 2k-qubit states.     

Disorder structure of free-flow and global jams in the extended BML model

The original BML model is extended by introducing extended sites, which can hold several vehicles at each time-step. Unexpectedly, the flow in the extended model sharply transits from free-flow to global jams, but the transition is not one-order in original BML model. And congestion in the extended model appears more easily. This can ascribe to the mixture of vehicles from different directions in one site, leading to the drop-off of the capacity of the site. Furthermore, the typical configuration of free flowing and global jams in the extended models is disorder, different from the regular structure in the original model.