A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti₃Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti₃Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti₃Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti₃Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.     

Aggregation induced polyelectrolyte multilayer film containing cubic silsesquioxane nanoparticles

Polyelectrolyte multilayer (PEM) films offer a method to functionalize substrates with specific properties that enable the films to be used for a variety of purposes. Desirable qualities of PEM films can include mechanical strengths, ease of preparations, flexibility, and their abilities to have their properties tailored to suit a particular process. We present a simple method to fabricate a class of PEM films that incorporate cubic silsesquioxane nanoparticles (CSSQ). Through a spin self-assembly (SSA) process, a hybrid multilayered film with two-components, namely, poly(styrene sulfonate) (PSS) and octaammonium cubic silsesquioxane (CSSQ) nanoparticle have been fabricated. The formation of this multilayer film is further verified by ellipsometry, contact angle studies, and atomic force microscopy (AFM). The water contact angle and ellipsometric measurements exhibit that the (PSS/OA-CSSQ) films are deposited onto the substrate. The surface topography of the deposited bilayers of PSS/OA-CSSQ film appears to be uniformly distributed with extremely small granules but the film uniformity of the granular surface is diminished and clusters of granules are observed at above 5 bilayers due to the aggregation of the OA-CSSQ nanoparticles.     

Decay studies of K isomers in 254No

A detailed $ \gamma$ spectroscopic decay study of two K isomers in ²⁵⁴No was performed. In addition to the previously reported $ \gamma$ lines two new transitions of E = 778 , 856keV could be attributed to the decay pattern of ^254m1No ( T _1/2 = 275±7 ms). The population of an excited band built up on this isomer ( $\ensuremath K^{\pi} =8^{-}$ by the decay of ^254m2No ( T _1/2 = 198±13 μs) could be proven by measuring delayed $ \gamma$ - $ \gamma$ coincidences between transitions stemming from the decay of both isomeric states. The energies of the band members could be established up to $\ensuremath I^{\pi} = 15^{-}$ . A spontaneous fission branch of (2.0±1.2)×10^-4 was measured for ^254m1No , an upper limit of $ \le$ 1.2×10^-4 was estimated for ^254m2No . These values demonstrate the high stability of multi-quasiparticle configurations against spontaneous fission. Evidence for an $ \alpha$ decay branch of ^254m1No in the order of 1×10^-4 was found.     

Band-rejection filter based on a Bragg fiber with a defect layer

<正>A novel band-rejection filter based on a Bragg fiber with a defect layer is proposed.A defect layer is introduced in the periodic high/low index layers in the cladding of the Bragg fiber,which results in large confinement loss for some resonant wavelengths inside the band gap range of the Bragg fiber.A segment of the Bragg fiber with a defect layer can be used as a band-rejection filter,whose characteristics are mainly determined by the structure of the Bragg fiber.The simulation results show that the bandwidth of such a band-rejection filter is dependent on the number of the periodic high/low index layers in both sides of the defect layer in the cladding of the Bragg fiber.     

Hollow elliptical Gaussian beams generated by a triangular prism

Based on the tensor method, an analytical formula for hollow Gaussian beams (HGBs) generated by a triangular prism has been derived, and the propagation properties have been studied. It is shown that hollow elliptical Gaussian beams (HEGBs) can be obtained in the near field after the prism, and that the eccentricity of the output beam is affected by parameters such as the incidence angle, refractive index of the prism and the order of the HGB. It shows that by using a triangular prism one can conveniently obtain HEGBs.     

受激布里渊散射新介质——全氟胺的研究

本文从介质化学结构与受激布里渊散射(SBS)特性的关系入手,寻找出了SBS特性良好的全氟胺系列新介质——FC-131,FC-3283,FC-40,FC-43,FC-70等,并测定或计算出了新介质的SBS参数. 结果表明,新介质的吸收系数均小于10^-3 cm^-1,光学击穿阈值均高于100 GW/cm². 全氟胺系列新介质不仅具有良好的SBS特性,而且还具有无毒、低挥发性和高稳定性等一系列独特的物理化学性质. 新介质的发现不仅增加SBS介质的种类,而且能够有效提高SBS系统的性能,对于SBS相位共轭镜在高功率激光系统中的应用打下了良好的基础. 关键词： 受激布里渊散射(SBS) 全氟胺 吸收系数 光学击穿阈值     

一种投影式激光方向测量方法

为了在激光告警中实现全方位角度探测,且达到一定的探测精度,提出了一种投影式激光方向测量方法.通过计算激光照射在参量给定的遮光板上形成的投影量.求解在探测器上由不同探测象限产生的不同的探测电流的比值.再根据投影面积的比值与角度一一对应的关系可事先编码的原理.由对应程序判断激光入射方向.在软件Matlab仿真中计箅得到产生最小分辨率的四个极限角度分别为(0°,90°)、(33°,21°)、(33°,69°)、(45°,90°),并由实验得到最小分辨电压为0.05 V.通过仿真计算与实验数据证明该设计可达到最小识别角度1°的探测要求.     

Anomalous transport properties and phase diagram of the FeAs-based SmFeAsO1-xFx superconductors

We report the detailed phase diagram and anomalous transport properties of Fe-based high-T_{c} superconductors SmFeAsO1-xFx. It is found that superconductivity emerges at x approximately 0.07, and optimal doping takes place in the x approximately 0.20 sample with the highest T_{c} approximately 54 K. T_{c} increases monotonically with doping; the anomaly in resistivity from structural phase or spin-density-wave order is rapidly suppressed, suggesting a quantum critical point around x approximately 0.14. As manifestations, a linear temperature dependence of the resistivity shows up at high temperatures in the x<0.14 regime but at low temperatures just above T_{c} in the x>0.14 regime; a drop in carrier density evidenced by a pronounced rise in the Hall coefficient is observed below the temperature of the anomaly peak in resistivity. A scaling behavior is observed between the Hall angle and temperature: cottheta_{H} proportional, variantT;{1.5} for all samples with different x in SmFeAsO1-xFx system.     

The isotopes259106,260106, and261106

In irradiations of²⁰⁷Pb and²⁰⁸Pb, respectively, with⁵⁴Cr theα-decay of the isotopes²⁵⁹106,²⁶⁰106, and²⁶¹106 could be observed for the first time. For²⁶⁰106 a spontaneous fission branch of (50 _?20 ⁺³⁰ )% was observed. The isotopes were identified by genetic relationships of α-decay after separation in-flight with the velocity filter SHIP and implantation into a position-sensitive silicon surface-barrier detector. The measured partial fission halflife of the doubly even isotope²⁶⁰106 of (7.2 _?2.7 ^+4.8 )ms exceeds the predicted values by at least a factor of 40. This result could be explained by the high shell corrections of the ground state mass, derived from the measured α-decay energies. The experimental results show evidence for an island of purely shell stabilized nuclei in the region of deformed isotopes beyond the actinides.     

辉光放电聚合物结构及力学性质研究

采用低压等离子体聚合技术,通过调整工作气压和反式二丁烯(T₂B)与H₂流量比制备了辉光放电聚合物(GDP)涂层. 利用傅里叶变换红外吸收光谱和元素分析法讨论了工作气压和T₂B与H₂流量比对GDP涂层内部H原子含量及结构的影响,并且通过纳米压痕技术对GDP涂层的硬度及杨氏模量进行了表征.研究结果表明:降低工作气压和T₂B与H₂流量比,GDP涂层内sp³ C 关键词： 傅里叶变换红外光谱 纳米压痕 杨氏模量 硬度