平板热管在毛细极限下的传热能力研究

建立了多孔毛细芯结构的平板热管在冷凝段不发生堵塞的情况下流动和传热的理论模型,分析了热管在毛细限下的最大传热量和热阻的变化.结果表明,丝网目数的增加和工作温度的升高会增大热管的传热能力,热管工质为水时的传热性能优于工质为丙酮和乙醇时的情况.     

槲皮素与Cu2+和Al3+配位反应的紫外可见吸收光谱法研究

采用带有快门的增强型瞬态光谱探测系统ICCD, 实时拍摄了槲皮素与Cu2+ 和Al3+ 配位反应的紫外-可见吸收光谱。结果显示, Cu2+ 和Al3+与槲皮素配合, 在中性条件下都有吸收峰为428 nm左右的中间产物产生, 最终产物都在300 nm左右有稳定的吸收峰; 而酸性条件下则直接生成吸收峰为300 nm左右的最终产物。虽然Cu2+ 和Al3+是不同的金属离子, 但在相同的酸性或中性条件下, 它们与槲皮素的配合过程却是相似的,只是完成反应所需要的时间不同。本文结果为进一步研究槲皮素与金属离子配合的机理提供了实验依据。     

基于非平衡光纤干涉仪的窄线宽激光光源跳模实时测试方法

窄线宽激光器随机发生的跳模现象,是影响光学系统稳定的重要因素.激光器线宽窄往往意味着较长的谐振腔和较小的模间隔,从而给跳模的监测带来了难度.本文提出一种基于非平衡光纤干涉仪的窄线宽光源跳模测试方法,该方法将激光器跳模的频率变化转变为干涉仪的相位变化,并通过相位产生载波(PGC)调制解调技术来检测相位信息,从而实现对跳模过程的监测.该方法灵敏度高,能够长时间连续监控,测试效果优于Fabry-Pérot干涉仪,还可在kHz量级上测量窄线宽激光器的线宽,为单纵模窄线宽激光器研究提供有效的测试手段.     

钙钛矿结构材料Sr8CaRe3Cu4O24压力效应的研究

 基于密度泛函理论,运用局域轨道密度近似+哈伯德相互作用和平均场方法,研究了新型钙钛矿结构材料Sr₈CaRe₃Cu₄O₂₄在不同压强下的机械、电磁性质,并探讨该材料的居里温度T_C随压强变化的规律。计算结果表明：T_C随着压强的增加而升高,费米面附近能隙逐渐减小。最后通过海森伯模型对此作出了较为合理的解释。     

锁模脉冲波长连续可调谐光纤激光器

利用在腔内加入可调谐光纤光栅滤波器使“8”字形腔掺Yb3+光纤激光器在锁模状态下实现波长连续可调谐.实验中,在保证锁模状态稳定的情况下,通过调节可调谐光纤光栅滤波器,使激光器输出锁模脉冲的中心波长在1 047 nm～1 055 nm范围内连续调谐,重复频率稳定维持在4.9 MHz.在中心波长1 053 nm处,测得锁模脉冲输出平均功率为8.02 mW,光谱带宽1 nm,脉冲宽度为259.3 ps.这种“8”字形腔被动锁模光纤激光器在锁模状态下对波长连续可调谐,并可长时间稳定工作.     

Investigation of fabrication and hetero-epitaxy relationship of CoCrPt thin films grown on CrW underlayer

This paper reports that longitudinally oriented CoCrPt thin films with Cr₈₅W₁₅ underlayer and CoCr intermediate layer for use of giant magnetoresistance heads were fabricated by magnetron sputtering. Without CoCr intermediate layer, CoCrPt layer deposited directly on Cr₈₅W₁₅ underlayer which has a dominant (200) texture exhibits unexpected (10\bar {1}1) texture. After introducing CoCr intermediate layer, the CoCrPt layer shifts into (11\bar {2}0) texture. This article studies the crystallographic hetero-epitaxy relationship between magnetic layer and underlayer in order to understand the appearance of CoCrPt (10\bar {1}1) texture on (200) textured Cr underlayer and the influence of CoCr intermediate layer on the inducement of CoCrPt (11\bar {2}0) texture. The CoCr intermediate layer plays a crucial role in controlling the microstructure and consequently the magnetic properties of the overlying magnetic layer.     

污泥内层和外层胞外聚合物的三维荧光光谱特性研究

运用三维荧光光谱技术对污泥LB-EPS和TB-EPS的荧光特性进行了研究.实验结果表明,在污泥LB-EPS和TB-EPS中都有三个明显的荧光峰,分别为Peak B(λex/λem=270～280 nm/345～360 nm),Peak C(λex/λem=330～340 nm/410～430 am)和Peak D(λex/λem=390 nm/450～470 nm).其中Peak B为类蛋白荧光(Protein-like)、Peak C为可见区类富里酸荧光(Visible fulvic-like)、Peak D为类腐殖酸荧光(Humic-like).从各荧光峰的荧光强度来分析,LB-EPS和TB-EPS中的主要成分都为类蛋白,然后依次为富里酸和腐殖酸.浓度和pH值对污泥LB-EPS和TB-EPS的三维荧光特性都有很大的影响,但影响程度略有区别,表明作为外层的胞外聚合物,LB-EPS表现出与TB-EPS不全相同的化学结构.     

A Priori Estimates and Existence of Positive Solutions for a Quasilinear Elliptic Equation

On the basis of some new Liouville theorems, under suitableconditions, a priori estimates are obtained of positive solutionsof the problem where R^N (N 2) is a bounded smooth domain, p>1 and isa parameter, , q are given constants such that p–1<<p*–1, <q, p*=Np/(N–p) if N > p and p*= when N p, and a(x) is a continuous nonnegative function. Makinguse of the Leray–Schauder degree of a compact mappingand a priori estimates, the paper finds that the problem abovepossesses at least one positive solution. It also discussesthe corresponding perturbed problem, where a(x) is replacedby a(x)+, >0. The results are strikingly different from thoseobtained for the case =p–1.     

Research on the boron contamination at the p/i interface of microcrystalline silicon solar cells deposited in a single PECVD chamber

This paper studies boron contamination at the interface between the p and i layers of μ c-Si:H solar cells deposited in a single-chamber PECVD system. The boron depth profile in the i layer was measured by Secondary Ion Mass Spectroscopy. It is found that the mixed-phase μ c-Si:H materials with 40% crystalline volume fraction is easy to be affected by the residual boron in the reactor. The experimental results showed that a 500-nm thick μ c-Si:H covering layer or a 30-seconds of hydrogen plasma treatment can effectively reduce the boron contamination at the p/i interface. However, from viewpoint of cost reduction, the hydrogen plasma treatment is desirable for solar cell manufacture because the substrate is not moved during the hydrogen plasma treatment.     

The uv-Decomposition on a Class of D.C. Functions and Optimality Conditions

In this paper,the UV-theory and P-differential calculus are employed to study second-order ex-pansion of a class of D.C.functions and minimization problems.Under certain conditions,some properties ofthe U-Lagrangian,the second-order expansion of this class of functions along some trajectories are formulated.Some first and second order optimality conditions for the class of D.C.optimization problems are given.