基于Schrdinger方程的耦合常数解析延拓方法

基于Schr¨odinger方程 ,利用耦合常数解析延拓方法研究了球对称的方势阱、Woods Saxon势和谐振子势中的单粒子共振态的能量与宽度 .分析了耦合常数的取值区间和Pad啨多项式阶数对计算结果的影响 .结果发现 ,在适当的耦合常数取值范围内 ,随着Pad啨多项式阶数的增加可以得到稳定和收敛的单粒子共振态能量与宽度 .     

氩等离子体物态方程的TF简化模型

对于高温高压下氩等离子体的电离度和物态方程,本文给出了一种基于Thomas-Feimi(TF)统计模型的简化计算新方法:首先将TF模型电离势的数值结果进行函数逼近,给出一个便于数值求解的计算电离度的近似计算方法,并由此计算了局部热动平衡下的氩等离子体在10～1000 eV高温范围内的物态方程.计算结果与国外报道的其他几种理论模型的计算结果均符合很好,与实验值也吻合较好.本文所提出的简单模型也适用于计算混合物物态方程,可以在电磁发射技术领域中的强电离等离子体中有更为广阔的应用前景.     

RPC读出条的阻抗匹配

文章对高阻板探测器读出条的阻抗匹配问题进行了研究;引入了一个用于计算带状线特性阻抗的经验公式.测量的特性阻抗与经验公式很好地符合,说明这个经验公式可以用于RPC读出条特性阻抗的计算,以改善RPC读出信号的质量,利于RPC探测器性能的测量.     

棒状钡铁氧体的反相微乳法制备

A rodlike barium ferrite precursor with an average size of 0.72～19.6 μm and aspect ratio of 2.6～8.3 has been successfully prepared in an inverse microemulsion consisting of isooctane, cetanyl trimethyl ammonium bromide (CTAB), n-C₄H₉OH and water with ammonia and ammonium oxalate as precipitants. On sintering at 780(C, the rodlike precursor particles could be transformed into rodlike particles of barium ferrite(BaFe₁₂O₁₉) with the average size and aspect ratio of 0.69～18.2 μm and 2.3～5.8, respectively. The effect of volume ratio of aqueous phase to oleic phase, the starting concentrations of metal ions and the starting concentration ratios of metal ions to precipitants were investigated.     

溶胶－凝胶法制备Na_5YSi_4O_（12）及其离子导电性质

用溶胶－凝胶方法制备了钠快离子导体Ｎａ_５ＹＳｉ_４Ｏ_（１２）（简称ＮＹＳ）的纯相，应用交流阻抗谱技术测定了样品的离子电导和离子导电活化能，用扫描电子显微镜对用不同方法制备的样品烧结体表面进行了观察。与传统固相反应法制备的ＮＹＳ离子导体相比，用溶胶－凝胶方法制备的ＮＹＳ烧结体具有较好的界面效应。     

一种新型侧链液晶聚合物的喇曼光谱研究

The Raman scattering on a novel liquid crystal side chain polymer, poly-2,5-bis (p-meth-oxybenzoyloxy) styrene, has been performed. We observed that the characteristic Raman sp-ctra of the vinyl group in the monomer changed much deeply in the polymer, especially for the Raman line correponding to the C=C of the vinyl group which disappeared completly in the polymer. Contrast with that, the Raman spetra of the rest group did not present any substantial difference between the monomer and the polymer. These experimental facts show-ed that the vinyl group of the monomer was tranfered to the polymeric backbone while the chemical structure of the mesogenic unit in the monomer remained after the polymerization,and also conformed that it was successful in the synthesis of a liquid crystal side chain plymer without a flexible spacer between the mesomorphic unit and the molecular main chain.     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed     

BIOMARKERS INDICATING SEDIMENTARY PALEOENVIRONMENTS

Samples involved in this paper are 35 pieces of crude oils and 43 pieces of source rocks, from which a series of biomarkers, capable of indicating paleoecology and paleoenvironment. This will provide a scientific basis for tracing back to sedimenta-y paleoenvironment and paleoecology.     

配合物形成的三维超分子体系—[Ni(C_6H_4O_2N)_2(H_2O)_4]的水热法合成、晶体结构及热分析

采用水热法用Ni(NO3)26H2O和异烟酸制备出了一种新的由配合物形成的三维超分子体系—[Ni(C6H4O2N)2(H2O)4],并通过X射线衍射对其晶体结构进行了测定。 该晶体属三斜晶系,空间群为Pī, 所得晶胞参数为: a = 6.9228(4), b = 9.6664(19),c = 6.322(1) , a = 96.86(3), b = 113.33(3), g = 110.35(3)°, V = 347.6(1) 3, Z = 1, Mr = 374.98, Dc = 1.791 g/cm3, F(000) = 194, m = 1.443 mm-1。用1362个可观察的 (I > 2s(I))衍射点,修正123个结构参数, 最终偏离因子R = 0.0444,wR = 0.1271。在组成该化合物的基本结构单元[Ni(C6H4O2N)2(H2O)4]中,Ni处于1个稍微拉长的八面体的中心; 各个结构单元之间通过氢键OH…O相互连接,形成了无限伸展的具有层状结构的三维超分子体系。 另外,从差热及热重曲线可以看出,该化合物加热到154 ℃时开始分解, 首先失去4个H2O,再失去2个异烟酸根,最后残余物为NiO。     

MOLECULAR WEIGHT DISTRIBUTION OF AB, A, TYPE CONDENSATION POLYMERS OBTAINED BY ADDING AB MONOMERS IN BATCHES

The molecular weight distribution (MWD) and arm length distribution of AB, Ar type condensation polymers obtained by adding AB monomers in batches have been derived by statistical and kinetic methods. Calculations show the MWD of condensation polymers obtained by this process is much narrower than that of one batch reaction and agrees with the Monte Carlo results very well.