一维光子晶体微腔在硅基材料发光中的应用研究

硅基材料的高效发光对未来硅基光电子集成的发展极其关键,含微腔的一维光子晶体可以显著提高其发光强度、窄化其发光峰.介绍了几种硅基材料发光的一维光子晶体微腔结构,包括单缺陷模式的对称与非对称结构、多缺陷模结构及电注入结构.利用传输矩阵法计算其缺陷模透射谱,以间接分析其发光谱.     

Observation of thermal-induced optical guiding and bistability in a mid-IR continuous-wave, singly resonant optical parametric oscillator

We report the observation of thermal-induced optical guiding and bistability in a mid-IR cw, singly resonant optical parametric oscillator (SRO) at approximately 3.2 microm. The SRO employs a MgO:PPLN crystal as the gain medium and a 1-nm-linewidth Yb-fiber laser at 1.064 microm as the pump source. As soon as the pump power reaches the thermal guiding threshold at 16.5 W, the SRO shows a step increase in the parametric efficiency by a factor of 2.5. At 25 W pump power, the SRO generated 5.3 and 1.2 W at 1.58 and 3.23 microm, respectively, with single-longitudinal-mode performance for the 3.23 microm radiation.     

受激布里渊散射新介质——全氟胺的研究

本文从介质化学结构与受激布里渊散射(SBS)特性的关系入手,寻找出了SBS特性良好的全氟胺系列新介质——FC-131,FC-3283,FC-40,FC-43,FC-70等,并测定或计算出了新介质的SBS参数. 结果表明,新介质的吸收系数均小于10^-3 cm^-1,光学击穿阈值均高于100 GW/cm². 全氟胺系列新介质不仅具有良好的SBS特性,而且还具有无毒、低挥发性和高稳定性等一系列独特的物理化学性质. 新介质的发现不仅增加SBS介质的种类,而且能够有效提高SBS系统的性能,对于SBS相位共轭镜在高功率激光系统中的应用打下了良好的基础. 关键词： 受激布里渊散射(SBS) 全氟胺 吸收系数 光学击穿阈值     

Physical characteristics of polyimide films for flexible sensors

Physical characteristics of polyimide films, including optical, micro/nano mechanical, and thermophysical characteristics were investigated using a photometric, a nanoindentation, and a thermomechanical analyzer for applications in flexible sensors. Experimental results show that UV light cannot transmit into the polyimide films. The transmittances, with a maximum of about 86%, at VIS and near IR lights decrease with increasing PI film thicknesses. The mechanical characteristics were determined using tensile, bending moment, and nanoindentation testing. The stress–strain curve approximated bilinear characteristics, the load–unload bending moment exhibited hysteresis, and nanoindentation generated elastic energy dissipation in the loading–unloading region. Nanoindentation showed an almost uniform hardness and a reduced Young’s modulus of about 0.181±0.03 and 3.21±0.06 GPa, respectively, when the penetrating depth was more than about 2 μm. Thermophysical characteristics were greatly influenced on 8.3 and 25 μm specimens due to the higher relaxation of thin PI films. The thermal expansion remained steady when the thickness was over 50 μm. The results show that PI films have potential in flexible sensing and higher temperature fabrication.     

The fractal measurement of experimental images of supersonic turbulent mixing layer

Flow visualization of supersonic mixing layer has been studied based on the high spatiotemporal resolution Nano-based Planar Laser Scattering(NPLS) method in SML-1 wind tunnel. The corresponding images distinctly reproduced the flow structure of laminar,transitional and turbulent region,with which the fractal measurement can be implemented. Two methods of measuring fractal dimension were introduced and compared. The fractal dimension of the transitional region and the fully developing turbulence region of supersonic mixing layer were measured based on the box-counting method. In the transitional region,the fractal dimension will increase with turbulent intensity. In the fully developing turbulent region,the fractal dimension will not vary apparently for different flow structures,which em-bodies the self-similarity of supersonic turbulence.     

应用ICP-MS检测转基因大豆油中22种元素含量

随着转基因食品的推广应用,人们越来越关心其营养特性。以转基因大豆油为实验材料,借助于ICP-MS对转基因大豆油中22种元素含量进行了测定。结果显示,七种大量元素含量在0.13～12.52 μg·g-1范围内;15种微量元素在0.15～700.00 ng·g-1之间。大量元素由多到少的顺序是：Ca>Na>K>Mg>Al>P>Si;微量元素中含量最多的五种元素是Zn>Ba>Cr>Fe>Ti。结果说明市场上销售的转基因大豆油,各种营养元素含量可以达到要求,特别是Zn,Ba,Cr,Fe等微量元素含量较高。     

悬浮液进样-原子吸收光谱法测定核桃粉中的钙、铁和锌

采用悬浮液进样技术应用于原子吸收光谱法,测定了核桃粉中的钙、铁和锌的含量.将核桃粉悬浮于琼脂胶体中制成悬浮液,直接喷入空气-乙炔火焰,用标准加入法测定,将实验结果与灰化法结果进行了比较,经t检验,在显著性水平a=0.05时两种方法无显著性差异,相对标准偏差≤6.1%,结果吻合较好.该方法简便,快速,灵敏度高,准确性好.     

Some theoretical aspects of elastic wave modeling with a recently developed spectral element method

A spectral element method has been recently developed for solving elastodynamic problems. The numerical solutions are obtained by using the weak formulation of the elastodynamic equation for heterogeneous media, based on the Galerkin approach applied to a partition, in small subdomains, of the original physical domain. In this work, some mathematical aspects of the method and the associated algorithm implementation are systematically investigated. Two kinds of orthogonal basis functions, constructed with Legendre and Chebyshev polynomials, and their related Gauss-Lobatto collocation points are introduced. The related integration formulas are obtained. The standard error estimations and expansion convergence are discussed. An element-by-element pre-conditioned conjugate gradient linear solver in the space domain and a staggered predictor/multi-corrector algorithm in the time integration are used for strong heterogeneous elastic media. As a consequence, neither the global matrices nor the effective force vector is assembled. When analytical formulas are used for the element quadrature, there is even no need for forming element matrix in order to further save memory without losing much in computational efficiency. The element-by-element algorithm uses an optimal tensor product scheme which makes this method much more efficient than finite-element methods from the point of view of both memory storage and computational time requirements. This work is divided into two parts. The first part mainly focuses on theoretical studies with a simple numerical result for the Che-byshev spectral element, and the second part, mainly with the Legendre spectral element, will give the algorithm implementation, numerical accuracy and efficiency analyses, and then the detailed modeling example comparisons of the proposed spectral element method with a pseudo-spectral method, which will be seen in another work by Lin, Wang and Zhang.     

飞秒脉冲振幅和相位的无干涉条纹重构法测量

对作者所提出的无干涉条纹直接电场重构测量飞秒脉冲的振幅和相位的新方法作出进一步理论分析，并通过实验测量说明该方法的优越性.该方法克服了传统的SPIDER方法的弊病，能得到一组无干涉条纹的图像，排除传统方法必须使用傅里叶变换滤波消除干涉条纹而引进的系统误差，使得该方法能够采用较简便设备且能较准确测量飞秒脉冲强度轮廓和相位.最后给出同一条件下新方法和传统SPIDER方法分别重构的脉冲强度自相关曲线与实验测量结果的比较，以说明新方法的有效性和优越性.