Cylindrical invisibility cloak with simplified material parameters is inherently visible

It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination [J. B. Pendry, D. Schurig, and D. R. Smith, Science 312, 1780 (2006)10.1126/science.1125907]. The cylindrical cloaks experimentally demonstrated [D. Schurig, Science 314, 977 (2006)10.1126/science.1133628] and theoretically proposed [W. Cai, Nat. Photon. 1, 224 (2007)10.1038/nphoton.2007.28] have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if the cloak is made of a homogeneous isotropic medium, and thus visible. To all high-order cylindrical waves, our numerical simulation suggests that the simplified cloak inherits some properties of the ideal cloak, but finite scatterings exist.     

Ideal cylindrical cloak: perfect but sensitive to tiny perturbations

A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, because of the slow convergence of the zeroth-order scattering coefficients, a tiny perturbation on the cloak would induce a noticeable field scattering and penetration.     

Cavity linewidth narrowing and broadening due to competing linear and nonlinear dispersions

We experimentally demonstrate cavity linewidth control by manipulating dispersion of the intracavity medium. By making use of the dramatic change of Kerr nonlinearity near electromagnetically induced transparency resonance in a three-level atomic system, the cavity transmission linewidth can be greatly modified. As the cavity input intensity increases, the cavity linewidth changes from below to above empty cavity linewidth, corresponding to subluminal and superluminal photon propagation in the cavity, respectively.     

A novel imaging tool for hepatic portal system using phase contrast technique with hydrogen peroxide‐generated O2 gas

The objective of this study was to investigate the potential of hydrogen peroxide‐generated oxygen gas‐based phase contrast imaging (PCI) for visualizing mouse hepatic portal veins. The O₂ gas was made from the reaction between H₂O₂ and catalase. The gas production was imaged by PCI in real time. The H₂O₂ was injected into the enteric cavity of the lower sigmoid colon to produce O₂ in the submucosal venous plexus. The generated O₂ gas could be finally drained into hepatic portal veins. Absorption contrast imaging (ACI) and PCI of O₂‐filled portal veins were performed and compared. PCI offers high resolution and real‐time visualization of the O₂ gas production. Compared with O₂‐based ACI, O₂‐based PCI significantly enhanced the revealing of the portal vein in vivo. It is concluded that O₂‐based PCI is a novel and promising imaging modality for future studies of portal venous disorders in mice models.     

基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

非晶碳氧化硅纳米线的合成与光致发光

利用直流电弧放电合成非晶碳氧化硅(SiCO)纳米线,不使用催化剂和模板,独立的SiCO 纳米线沉积在石墨锅的表面．通过XRD、SEM、TEM、XPS、FTIR等对SiCO纳米线进行了表征．结果表明,纳米线长度为20～100 μm,直径为10～100 nm,Si原子同C原子和氧原子分享成键组成SiCO单元．SiCO纳米线的光致发光谱在454和540 nm呈现了强而稳定的白色发光峰． SiCO纳米线的生长机制为等离子辅助气―固生长机制．     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

弹簧参与的微小振动一定是简谐运动吗

振动和波动是生活中的一种非常普遍而重要的运动形式,其中简谐振动是最简单、最基本的运动,弹簧振子是研究简谐运动的最基本模型.在研究弹簧参与的微小振动时,部分学生不能很好的判定弹簧参与的微小振动是否为简谐运动.本文讨论了系统作简谐运动的充要条件,并通过4个具体例子详细分析了弹簧参与的微小振动.