红外小目标与背景辐射对比度的研究

红外目标与背景的对比度特征是红外探测系统检测的重要特征。研究了目标和背景在探测器上的辐射照度,提出了一种红外小目标与背景的辐射对比度,分析了该目标与背景对比度的相关因素。     

重金属Pb2+对玉米苗生长的影响

以水栽培的玉米幼苗为材料，用不同浓度的醋酸铅溶液处理后，分别在第10天、第20天、第30天对玉米苗的根、茎、叶分别进行Pb^2＋含量测定。分析结果：Pb^2＋在玉米体内的分布表现为根〉叶〉茎；玉米中的叶绿素含量均降低；随着Pb^2＋浓度的增大，玉米细胞的膜透性表现根〉叶〉茎依次升高；Pb^2＋对玉米的伤害率的大小表现为根〉叶〉茎。该实验为进一步研究农作物对重金属Pb^2＋的耐性和重金属Pb^2＋在农作物体内的分布提供了可参考的数据。     

Preparation, Characterization and Catalytic Properties of S2O8^2-／ZrO2 Supported by Tungsten Carbide

A WC-supported S2O8^2-/ZrO2(PSZ) catalyst was prepared and characterized by means of XRD, BET, FTIR and XPS. The isomerization of n-pentane over the catalyst was investigated as well. The results show that the skeletal isomerization and the crack of n-pentane proceed simultaneously on WC-supported S2O8^2-/ZrO2 catalyst. The addition of tungsten carbide showed a significant enhancement in the activity and stability of the catalyst for n-pentane isomerization. The catalyst showed evidently a better activity than S2O8^2-/ZrO2 supported by Pt and WO3. The results can be interpreted by the existence of the tungsten oxycarbide compound(WCxOy) with carbidic, oxide and acidic sites.     

聚苯乙烯，聚甲基丙烯酸甲酯对聚氯乙烯／氯化聚乙烯共混体流变性的影响

PVC/CPE blend modified by rigid particles has good combined properties. In this paper, the effeCts of rigid particles (PMMA. PS. CaCO,) on the rheological behavior of PVC/ CPE systems were studied. The results showed that the apparent viscosity (aha) were decreased, extrusion surface smooth and Newtonian fluidity were slightly improved by filling a little amount of rigid ploymers (PS. PMMA) to PVC/CPE blends. The fluid activition energy (E,). Newtonian fluidity. extrusion surface smooth and ba of PVC/CPE blends were increased by filling CaCO₃ and die swelling ratio was decreased.The newtonian fluidity. En and ηa of PVC/CPE/CaCO₃ blends can be decreased by filling rigid polymers,and good extrusion surface smooth and low die swelling ratio unchanged.     

一般关系下的n-阶FC-粗糙集模型

给出一般模糊环境下n阶-FC-粗糙近似算子的定义,讨论它的一些性质,并通过α-水平集给出各种n-阶模糊粗糙集的表示。进而给出模糊传递闭包近似算子的定义,得到相应的结果。     

基于光纤SPR光谱分析的污水降解过程监测研究

讨论了光纤表面等离子体波传感器的工作原理,并对将其用于监测以甲基橙为代表的环境污水降解过程的可行性进行了探讨。用光纤SPR传感器监测了50 mL初始浓度为30 mg·L-1的甲基橙原溶液在降解过程浓度的变化,对降解过程中光纤SPR传感器的光谱进行了详细的分析;同时采用紫外-分光光度计对降解过程中溶液浓度的变化进行了监测,并对2种方法所测的数据进行了分析对比。结果表明,光纤SPR同常规方法的测量结果一致,随着降解时间的增加,甲基橙溶液的吸光度和浓度逐渐减小,光纤SPR传感器的共振波长逐渐发生蓝移,同初始标定的甲基橙原溶液共振光谱比较,说明甲基橙逐渐被降解,且在2 h内降解率达到73%,说明用光纤SPR传感器监测污水降解过程是完全可行的。研究结果不仅为环境污水降解过程提供了一种新的监测方法,同时促进了我国SPR传感技术与环保监测研究结合,为光纤SPR技术走向实用,并最终实现产业化积累了经验。     

激光对电视成像跟踪系统的软杀伤效应研究

分析了电视成像跟踪系统的组成原理,在开展脉冲激光干扰CCD的实验基础上,进行了激光对电视成像跟踪系统的软杀伤实验与理论分析。实验指出,激光对电视成像跟踪系统的软杀伤主要是对CCD光电探测系统的软杀伤,软杀伤效果如何与激光成像是否位于跟踪系统的波门之内有很大关系。     

A real-time AFM study on crystal nucleation and growth in nanodroplets of isotactic polypropylene

Isotactic polypropylene (iPP) nanodroplets were prepared by using the classical droplet method in this study. The formation of nanodroplets allowed the controlled observation of polymer nucleation as well as access to crystal growth at exceptionally high supercooling in iPP. Three cases including the heterogeneous nucleation and fast crystallization in iPP droplets, the formation of multiple independent homogeneous nuclei within a single droplet and a single nucleus within a single droplet were detected by using atomic force microscopy (AFM) during gradually cooling after remelting the nanodroplets. Moreover, it is found that when the volume of droplet is larger than the value of ca. 130000 nm3, the first case was observed. Otherwise, the latter two cases appeared. The temperature at which the onset of nucleation was observed in individual droplets was found to be mainly dependent on height of the droplets when the size scale of the droplet is comparable to the size of the critical nucleus in at least one dimension, which indicates the nucleation behavior under confinement.     

成核剂及其完善剂对聚乳酸结晶行为的影响

通过POM、DSC以及流变测试系统考察了成核剂(PPZn)及其完善剂(E61)对PLA结晶形貌及其结晶能力的影响.POM结果表明PPZn和E61对PLA的结晶形态的影响随两者含量的变化而变化.加入低含量的PPZn可诱导PLA得到一定完善程度的球晶,而较高含量的PPZn能够诱导PLA基体得到针状晶体.通过添加少量E61可使在PPZn较高含量下的PLA针状晶体转变为球晶.但更高含量E61的添加却使PPZn的成核作用受到抑制,再次生成针状晶体,且E61含量越高,抑制作用越明显.DSC和流变测试进一步证明PPZn可显著提高PLA的结晶能力、有效地缩短基体结晶时间,而E61的添加对PLA的结晶速率影响不大.     

几何画板模拟阿贝折射仪测折射率

几何画板模拟阿贝折射仪测量液体折射率的过程,相对传统教学手段,更加科学直观并动态演示。通过修改棱镜折射率和待测液体折射率的参数,通过直观几何光学分析,得到为何阿贝折射仪必须满足棱镜折射率大于待测折射率。利用程序易修改特点研究,棱镜不同顶角和考虑色散现象的模拟结果,定量研究差别。