Excess molar volume and viscosity deviation for binary mixtures of polyethylene glycol dimethyl ether 250 with 1,2-alkanediols (C3–C6) at T = (293.15 to 323.15) K

In this work, density and viscosity have been determined for (polyethylene glycol dimethyl ether 250 + 1,2-propanediol, or 1,2-butanediol, or 1,2-pentanediol, or 1,2-hexanediol) binary systems over the whole concentration range at temperatures of (293.15, 303.15, 313.15, 323.15) K and atmospheric pressure. Experimental data of mixtures were used to calculate the excess molar volumes V^E, and viscosity deviations Δη. These results were fitted by the Redlich–Kister polynomial relation to obtain the coefficients and standard deviations.     

Relative permittivity of the binary mixtures of 2-methoxyethanol with diethylene glycol,triethylene glycol,tetraethylene glycol,and polyethylene glycol 200 at various temperatures

Relative permittivities at T = (293.15, 298.15, and 303.15) K in the binary liquid mixtures of 2-methoxyethanol with diethylene glycol, triethylene glycol, tetraethylene glycol, and polyethylene glycol 200 have been measured over the entire mixture compositions. The relative permittivity deviations (Δε) were calculated from these experimental data. The results are discussed in terms of intermolecular interactions and structure of studied binary mixtures.     

Speeds of sound,densities, isentropic compressibilities of the system (methanol + polyethylene glycol dimethyl ether 250) at temperatures from 293.15 to 333.15 K

In this work, our objective is to contribute to the knowledge of the mixtures (alcohol + polyalkyl ether glycol) used in absorption refrigeration systems and heat pumps. The determination of different thermophysical properties is essential to understand the interactions among different molecules in liquid mixtures. Therefore, experimental data of speed of sound and density together with calculated values of isentropic compressibility for the refrigerant-absorbent system (methanol + polyethylene glycol dimethyl ether 250) (or Pegdme 250) have been gathered here over the whole range of composition at temperatures from T=293.15 to 333.15 K and atmospheric pressure. The two previous experimental properties were measured with a digital vibrating tube analyser Anton Paar DSA-48. Also, the excess molar volumes and the increments of the speed of sound and the isentropic compressibility have been determined for each composition and they were fitted to a variable-degree polynomial equation.     

Excess thermodynamic functions derived from densities and surface tensions of (p- or o-xylene + ethylene glycol dimethyl ether) between the temperatures (298.15 and 308.15) K

Densities (ρ) for binary systems of (p-xylene or o-xylene + ethylene glycol dimethyl ether) were measured over the full mole fraction range at the temperatures of (298.15, 303.15 and 308.15) K along with the densities of the pure components. The excess molar volumes (V^E) calculated from the density data show that the deviations from ideal behaviour in the two binary systems are negative, and they become more negative with the temperature increasing. Surface tensions (σ) of these binary systems were determined at the same temperatures (298.15, 303.15 and 308.15) K by the pendant drop method. The surface tension deviations (δσ) for p-xylene system are negative over the whole composition range, and become less negative with the temperature increasing, but for the o-xylene system, δσ are negative at high o-xylene concentration, and change to positive with the o-xylene concentration decreasing. The V^E and δσ were fitted to the Redlich–Kister polynomial equation. Surface tensions were also used to estimate surface entropy (S_σ) and surface enthalpy (H_σ).     

Excess molar volumes and deviations of the relative permittivity of the binary mixtures of 2-propoxyethanol with diethylene,triethylene, and tetraethylene glycols at various temperatures

Densities and relative permittivities at T = (293.15, 298.15, and 303.15) K in the binary liquid mixtures of 2-propoxyethanol with diethylene glycol, triethylene glycol, and tetraethylene glycol have been measured over the entire mixture compositions. These data have been used to compute the excess molar volumes and deviations of the relative permittivity. The results are discussed in terms of intermolecular interactions in the bulk of studied the binary mixtures.     

Liquid densities and excess molar volumes for water + diethylene glycolamine,and water,methanol, ethanol, 1-propanol + triethylene glycol binary systems at atmospheric pressure and temperatures in the range of 283.15–363.15 K

Liquid densities and excess molar volumes (V^E) are reported for the binary water+diethylene glycolamine, and water, methanol, ethanol, 1-propanol+triethylene glycol systems at atmospheric pressure and temperatures between 283.15 and 363.15 K in 10 K intervals. Negative V^E were found for all investigated systems. At given temperature, the most negative V^E is for the water+diethylene glycolamine system. For water containing systems, V^E increase with temperature while the inverse effect was observed for alcoholic systems, i.e. V^E became more negative with increasing temperature. For the triethylene glycol systems at constant temperature, absolute value of V^E decreases in the series: water>methanol>ethanol>1-propanol within the whole composition range. The experimental results have been correlated using the three parameter Redlich–Kister equation.     

Dynamic viscosities of the ternary liquid mixtures (dimethyl carbonate + methanol + ethanol) and (dimethyl carbonate + methanol + hexane) at several temperatures

Densities, ρ speeds of sound, u and dynamic viscosities, η of the ternary mixtures {dimethyl carbonate (DMC) + methanol + ethanol} and (dimethyl carbonate + methanol + hexane) were gathered at T = (293.15, 298.15, 308.15, and 313.15) K. From experimental data viscosity deviations, Δη of the ternary mixtures were evaluated. These results have been correlated using the Cibulka equation. The fitting parameters and the standard deviations of the ternary viscosity deviations are given. UNIFAC-VISCO group contribution method was used to predict the dynamic viscosities of the ternary mixtures at several temperatures.     

Solubility of novel open-chain crown ether bridged diphosphates in supercritical carbon dioxide

The solubility of newly synthesized chelating agents, i.e., tetraethylene glycol bis (2-ethylhexyl) dimethyl diphosphate (EG4EH), tetraethylene glycol bis (n-octyl) dimethyl diphosphate (EG4Oct), and tetraethylene glycol bis (2-butoxyethyl) dimethyl diphosphate (EG4BOE) in supercritical carbon dioxide (scCO₂) were determined at temperatures ranging from (318.15 to 333.15) K and pressures ranging from (12 to 21) MPa. Solubility increases in the order of EG4Oct (MW = 606.33) < EG4BOE (MW = 582.26) < EG4EH (MW = 606.33), indicating that branched side chains of the ligands play an important part in increasing solubility in scCO₂. Semi empirical density-based models proposed by Bartle and Chrastil were used to correlate the experimental data, and AARD values were calculated to be (1.2 to 2.9)% and (0.40 to 0.93)% for Bartle and Chrastil model, respectively. Additionally, the partial molar volumes of those compounds were estimated following the theory developed by Kumar and Johnston.     

Molar heat capacities of some aqueous (2-amino-2-hydroxymethyl-1,3-propanediol + glycol) systems

A new set of molar heat capacity data for aqueous {2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) + glycol} at (30 to 80) °C and different concentrations (4% to 16% by weight TRIS or 56% to 44% by weight water, in a fixed amount of glycol – 40% by weight) were gathered via reliable measurement method and are presented in this report. The glycols considered were diethylene glycol (DEG), triethylene glycol (TEG), tetraethylene glycol (T₄EG), propylene glycol (PG), dipropylene glycol (DPG), and tripropylene glycol (TPG). The 198 data points gathered fit the equation, C_p = C_p,a + B₁m + B₂m² + B₃m³, where C_p and C_p,a are the molar heat capacities of the (TRIS + glycol + water) and (water + glycol) systems, respectively, B_i the temperature-dependent parameters, and m the mole TRIS per kilogram (glycol + water). The overall average absolute deviation (AAD) of the experimental data from the corresponding values calculated from the correlation equation was 0.07%.     

Investigation of the isothermal (vapour + liquid) equilibria of aqueous 2-amino-2-methyl-1-propanol (AMP), N-benzylethanolamine,or 3-dimethylamino-1-propanol solutions at several temperatures

The vapour pressures of (2-amino-2-methyl-1-propanol (AMP) + water), (N-benzylethanolamine + water), or (3-dimethylamino-1-propanol + water) binary mixtures, and of pure AMP and 3-dimethylamino-1-propanol components were measured by means of two static devices at temperatures between 283 K and 363 K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The {2-amino-2-methyl-1-propanol (AMP) + water} binary mixture exhibits negative deviations in G^E (at T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range. For the aqueous N-benzylethanolamine solution, a S shape is observed for the G^E for all investigated temperatures over the whole composition range. The (3-dimethylamino-1-propanol + water) binary mixture exhibits negative deviations in G^E (at T < 293.15 K), positive deviations in G^E (for 293.15 K < T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range.     

Modeling hydrate formation conditions in the presence of electrolytes and polar inhibitor solutions

In this paper, a new predictive model is proposed for prediction of gas hydrate formation conditions in the presence of single and mixed electrolytes and solutions containing both electrolyte and a polar inhibitor such as monoethylene glycol (MEG), diethylene glycol (DEG) and triethylene glycol (TEG). The proposed model is based on the γ–φ approach, which uses modified Patel–Teja equation of state (VPT EOS) for characterizing the vapor phase, the solid solution theory by van der Waals and Platteeuw for modeling the hydrate phase, the non-electrolyte NRTL-NRF local composition model and Pitzer–Debye–Huckel equation as short-range and long-range contributions to calculate water activity in single electrolyte solutions. Also, the Margules equation was used to determine the activity of water in solutions containing polar inhibitor (glycols). The model predictions are in acceptable agreement with experimental data. For single electrolyte solutions, the model predictions are similar to available models, while for mixtures of electrolytes and mixtures of electrolytes and inhibitors, the proposed model gives significantly better predictions. In addition, the absolute average deviation of hydrate formation pressures (AADP) for 144 experimental data in solutions containing single electrolyte is 5.86% and for 190 experimental data in mixed electrolytes solutions is 5.23%. Furthermore, the proposed model has an AADP of 14.13%, 5.82% and 5.28% in solutions containing (Electrolyte + MEG), (Electrolyte + DEG) and (Electrolyte + TEG), respectively.     

Plastic–polymer composite electrolytes: Novel soft matter electrolytes for rechargeable lithium batteries

We present here a soft matter solid composite electrolyte obtained by inclusion of a polymer in a semi-solid organic plastic lithium salt electrolyte. Compared to lithium bis-trifluoromethanesulfonimide-succinonitrile (LiTFSI-SN), the (100 − x)%-[LiTFSI-SN]: x%-P (P: polyacrylonitrile (PAN), polyethylene oxide (PEO), polyethylene glycol dimethyl ether (PEG)) composites possess higher ambient temperature ionic conductivity, higher mechanical strength and wider electrochemical window. At 25 °C, ionic conductivity of 95%-[0.4 M LiTFSI-SN]: 5%-PAN was 1.3 × 10⁻³ Ω⁻¹ cm⁻¹ which was twice that of LiTFSI-SN. The Young’s modulus (Y) increased from Y → 0 for LiTFSI-SN to a maximum ∼1.0 MPa for (100 − x)%-[0.4 M LiTFSI-SN]: x%-PAN samples. The electrochemical voltage window for composites was approximately 5 V (Li/Li⁺). Excellent galvanostatic charge/discharge cycling performance was obtained with composite electrolytes in Li|LiFePO₄ cells without any separator.     

Thermodynamics of isomeric hexynes + MTBE binary mixtures

The vapor pressures of liquid hex-1-yne or hex-2-yne + methyl 1,1-dimethylethyl ether (MTBE) binary mixtures and of the three pure components were measured by a static method at several temperatures between 263 and 343 K. These data were correlated with the Antoine equation. Excess molar Gibbs energies G^E were calculated for several constant temperatures, taking into account the vapor-phase imperfection in terms of the second molar virial coefficients, and were fitted to the Redlich–Kister equation. Calorimetric excess enthalpy H^E measurements, for these binary mixtures, are also reported at 298.15 K. The experimental VLE and H^E data were used, examining the binary mixtures hex-1-yne or hex-2-yne + MTBE in the framework of the DISQUAC and modified UNIFAC (Do) models. The DISQUAC calculations, reporting a new set of interaction parameters for the contact carbon–carbon triple bond/oxygen ether, is regarded as a preliminary approach.     

Excess molar volumes,and excess molar enthalpies of (N-methyl-2-pyrrolidinone + an ether ) at the temperature 298.15 K

Excess molar volumes V_m^E have been calculated from measured density values over the whole composition range at T =  298.15 K and atmospheric pressure for six { N -methyl-2-pyrrolidinone  +  1,1-dimethylethyl methyl ether, or dipropyl ether, or 1,1-dimethylpropyl methyl ether, or diisopropyl ether, or dibutyl ether, or dipentyl ether}. Excess molar enthalpiesH_m^E were also measured for five { N -methyl-2-pyrrolidinone  +  1,1-dimethylethyl methyl ether, or dipropyl ether, or 1,1-dimethylpropyl methyl ether, or diisopropyl ether, or dibutyl ether} at T =  298.15 K and atmospheric pressure. The results are discussed in terms of intermolecular associations. The experimental results have been correlated with the UNIQUAC and NRTL equations.     

(Liquid + liquid) equilibria for mixtures of (ethylene glycol + benzene + cyclohexane) at temperatures (298.15, 308.15, and 318.15) K

Experimental (liquid + liquid) equilibrium (LLE) data for a ternary system containing (ethylene glycol + benzene + cyclohexane) were determined at temperatures (298.15, 308.15, and 318.15) K and at atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvent for extraction of benzene from cyclohexane. The effect of temperature in extraction of benzene from the (benzene + cyclohexane) mixture indicated that at lower temperatures the selectivity (S) is higher, but the distribution coefficient (K) is rather lower. The LLE results for the system studied were used to obtain binary interaction parameters in the UNIQUAC and NRTL models by minimizing the root mean square deviations (RMSD) between the experimental results and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The NRTL model fits the (liquid + liquid) equilibrium data of the mixture studied slightly better. The root mean square deviations (RMSDs) obtained comparing calculated and experimental two-phase compositions are 0.92% for the NRTL model and 0.95% for the UNIQUAC model.     

The effect of temperature and molar mass on the (liquid + liquid) equilibria of (poly ethylene glycol dimethyl ether + di-sodium hydrogen citrate + water) systems: Experimental and correlation

The (liquid + liquid) equilibrium for the {polyethylene glycol dimethyl ether 2000 (PEGDME₂₀₀₀) + di-sodium hydrogen citrate + H₂O} system was studied at T = (298.15, 308.15 and 318.15) K and atmospheric pressure (≈85 kPa). The free energies, enthalpies and entropies of cloud points were calculated in order to investigate the driving force formation of this two-phase system. To investigate the effect of molar mass of the polymer on the binodals and tie-lines, similar measurements were also made at T = 298.15 K on this two-phase system consisting of the PEGDME with molar masses of 500 and 250 g ⋅ mol⁻¹. The effective excluded volume model was used for representation of the phase-forming ability in PEGDME systems. An empirical and the Merchuck equations with the temperature dependency were used to correlate the binodal curves. The Othmer–Tobias and Bancraft and Setschenow equations, the osmotic virial and the extended NRTL models were used to fit the tie-line data.     

Phase equilibrium properties of binary aqueous solutions of benzylamine, 1,2-bis(2-aminoethoxy)ethane,or 2-[2-(dimethylamino)ethoxy]ethanol

The vapour pressures of (benzylamine + water), {1,2-bis(2-aminoethoxy)ethane + water}, or {2-[2-(dimethylamino)ethoxy]ethanol + water} binary mixtures, and pure 2-[2-(dimethylamino)ethoxy]ethanol component were measured by means of two static devices at temperatures between (283.15 and 363.15 (or 323.15)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (benzylamine + water) binary mixture exhibits positive deviations in G^E for (303.15 < T/K < 323.15) and a sinusoidal shape in G^E for T > 323.15 K over the whole composition range. The aqueous 1,2-bis(2-aminoethoxy)ethane or {2-[2-(dimethylamino)ethoxy]ethanol + water} solutions exhibit negative deviations in G^E for all investigated temperatures over the whole composition range.     

Excess molar volume and viscosity study for the ternary system tetrahydrofuran (1) + 1-chlorobutane (2) + 2-butanol (3) at 283.15, 298.15 and 313.15 K

This work reports the measured density, ρ, and viscosity, η, values of liquid mixtures of tetrahydrofuran (1) + 1-chlorobutane (2) + 2-butanol (3) at temperatures of 283.15, 298.15 and 313.15 K over a range of mole fractions and atmospheric pressure. Excess molar volume, V^E, viscosity deviations, Δη, and excess free energies of activation of viscous flow, ΔG^*E, have been calculated from experimental data and fitted to Cibulka, Singh et al. and Nagata and Sakura equations. The results were analyzed in terms of the molecular interaction between the components of the mixtures. Excess molar volumes and viscosity deviations were predicted from binary contributions using geometrical solution models, Tsao and Smith; Jacob and Fitzner; Kholer; Rastogi et al.; Radojkovic et al. Finally, experimental results are compared with those obtained by applying group-contribution method proposed by Wu.     

(Vapor-liquid) equilibria and excess Gibbs free energy functions of (ethanol + glycerol), or (water + glycerol) binary mixtures at several temperatures

The vapor pressures of (ethanol + glycerol) and (water + glycerol) binary mixtures were measured by means of two static devices at temperatures between (273 and 353 (or 363)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs free energy functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker method. The (ethanol + glycerol) binary system exhibits positive deviations in G^E where for the (water + glycerol) mixture, the G^E is negative for all temperatures investigated over the whole composition. Additionally, the NRTL, UNIQUAC and Modified UNIFAC (Do) models have been used for the correlation or prediction of the total pressure.     

Experimental determination of the isothermal (vapour + liquid) equilibria of binary aqueous solutions of sec-butylamine and cyclohexylamine at several temperatures

The vapour pressures of (sec-butylamine + water), (cyclohexylamine + water) binary mixtures, and of pure sec-butylamine and cyclohexylamine components were measured by means of two static devices at temperatures between 293 (or 273) K and 363 K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The (cyclohexylamine + water) system shows positive azeotropic behaviour for all investigated temperatures. The two binary mixtures exhibit positive deviations in G^E for all investigated temperatures over the whole composition range.