Group index and dispersion properties of photonic crystal waveguides with circular and square air-holes

The slow light and group velocity dispersion properties of 2D triangular lattice photonic crystal line defect waveguide (PCW) with square and circular air-holes are numerically investigated with the plane-wave expansion method. The simulation results show that the guided mode is impacted slightly by the cross section’s shape of the air-holes of the same filling ratio. Adjusting two rows of the inner-hole adjacent to the waveguide and modifying the waveguide width can bring in low-group velocity and low-dispersion (LVLD) region, in which the group index of the square holes can reach 210 which is far better than the circular-holes. At the same air-hole size and waveguide width, the PCW with the square holes can support higher bit rate of the signal up to 35 Gb/s. These results provide important theoretical basis for realizing of optical buffering and optical logic devices in all-optical network.     

Dual-frequency division de-multiplexer based on cascaded photonic crystal waveguides

A dual-frequency division de-multiplexing mechanism is demonstrated using cascaded photonic crystal waveguides with unequal waveguide widths. The de-multiplexing mechanism is based on the frequency shift of the waveguide bands for the unequal widths of the photonic crystal waveguides. The modulation in the waveguide bands is used for providing frequency selectivity to the system. The slow light regime of the waveguide bands is utilized for extracting the desired frequency bands from a wider photonic crystal waveguide that has a relatively larger group velocity than the main waveguide for the de-multiplexed frequencies. In other words, the wider spatial distribution of the electric fields in the transverse direction of the waveguide for slow light modes is utilized in order to achieve the dropping of the modes to the output channels. The spectral and spatial de-multiplexing features are numerically verified. It can be stated that the presented mechanism can be used to de-multiplex more than two frequency intervals by cascading new photonic crystal waveguides with properly selected widths.     

Design and analysis of slow light regime in silicon carbide 2D photonic crystal waveguides

We theoretically demonstrate the slow light capabilities of 2D silicon carbide based photonic crystal W1 waveguides (SiC-PhC-W1Ws) with numerical simulations. The PhC is assumed to be created by devising air-holes with hexagonal lattice in a standard SiC substrate having oscillator type ordinary refractive index. Numerical simulations show that by means of selective optofluidic infiltration and varying the air-holes radii, SiC-PhC-W1Ws are capable of slowing light down by about 473 times while their group velocity dispersions are tailored to near zero values. Our numerical study also suggests the possibility of slow-light guiding with n_g × Δλ/λ_c values as high as 0.42 in SiC-PhC-W1Ws at optical telecommunications wavelengths.     

Photonic crystal slotted slab waveguides

We report on the fabrication of photonic crystal waveguides in SOI that comprise an air-slot in the centre. The slot serves to confine suitably polarised optical radiation (H-polarisation) and due to its small size, provides extremely high field intensity values out with the high index material. Adding the photonic crystal environment then provides full control over the dispersive properties of this waveguide. We demonstrate the successful operation of this structure experimentally and explain its key features.     

Selective modes excitation in multimode photonic crystal waveguides

We investigate modes excitation with the input field of different positions in two-dimensional multimode photonic crystal waveguides. Odd modes can be selectively excited by the input field of odd symmetry. The input field with different positions can excite different modes due to the field intensity distribution of modes. When the input field locates at the position of the zero field, intensity of waveguide modes is zero and the modes are not excited. The finite-difference time-domain method is used to obtain the excited field distributions.     

Contra-directional coupling between two-dimensional photonic crystal waveguides

The contra-directional coupling between two photonic crystal (PC) waveguides is studied, using the finite-difference time-domain (FDTD) method. A design of contra-directional coupler is presented and its transmission properties are investigated. The device can be used as an add/drop filter. It is also shown that the coupled mode theory is suitable to study the photonic crystal waveguide coupler.     

Slow light engineering in polyatomic photonic crystal waveguides based on square lattice

In this paper, the slow light properties of the polyatomic Photonic Crystal (PhC) which has multiple different air holes in each primitive cell are investigated. A slow light waveguide with “U-type” group index-frequency curve, which results in nearly constant group index over large bandwidth, is achieved using this new photonic crystal geometry based on the square lattice. Also, the radius and position of the innermost rows of small air holes have been modified to investigate the feasibility of controlling the dispersion relation by subtle structural modification. Numerical results demonstrate that decreasing the group velocity effectively and meanwhile maintaining a large Normalized Delay-Bandwidth Product (NDBP) can be achieved by only modifying the radius of the innermost rows of small air holes. Shifting the innermost rows of small air holes toward the waveguide core is highly beneficial to enlarge the slow light bandwidth, but it contributes nothing to the promotion of NDBP. Our results provide important theoretical basis for the potential application offered by the polyatomic photonic crystal in future optical networks.     

Improved bends for two-dimensional photonic crystal waveguides

For two-dimensional photonic crystals involving infinitely long dielectric rods or air-holes on square or triangular lattices, a number of high performance 60° and 90° waveguide bends are obtained by solving optimization problems involving the radii of a few rods or air-holes as the degrees of freedom. In particular, the proposed 60° bends significantly outperform previous designs that insert three or five identical air-holes in the bend. The optimization problems are solved using a recently developed method based on the so-called Dirichlet-to-Neumann (DtN) maps of the unit cells.     

Transmission properties of two-dimensional photonic crystal channel waveguides

We study the transmission properties of straight channel waveguides designed in a two- dimensional (2D) photonic crystal patterned into an AlGaAs heterostructure. 2D dispersion calculations show the existence of small gaps occurring along the dispersion branch of the fundamental mode. We show that their location agree very well with mini-stop bands observed on the transmission spectra.     

Multiple slow light bands in photonic crystal coupled resonator optical waveguides constructed with a portion of photonic quasicrystals

Coupled resonator optical waveguides (CROWs) in complex two-dimensional (2D) photonic crystals (PCs) constructed with a portion of 12-fold photonic quasicrystals (PQs) are proposed. We show that enhanced transmission and slow light can be simultaneously achieved in such waveguides as well as general CROWs. Moreover, due to higher degree of flexibility and tunability of PQs for defect mode properties compared to conventional periodic PCs, multiple slow light bands can be flexibly obtained in CROWs constructed with complex 2D PCs. Our results may lead to the development of a variety of novel ultracompact devices for photonic integrated circuits.     

A compact wavelength division de-multiplexer based on directional coupling of one-dimensional photonic crystal waveguides

A fundamental dual-channel wavelength division de-multiplexer (WDDM) based on directional coupling of one-dimensional photonic crystal waveguides is presented, and its transmission characteristics of the WDDM are investigated by using finite-difference time-domain method. Calculated results indicate that for this WDDM, without any structural optimization, a high transmittance of more than 95% is observed at output ports. Combining the fundamental dual-channel WDDM with flexible bends of one-dimensional photonic crystal waveguides, we construct a simple and compact four-channel WDDM. Those WDDMs are expected to be applied to highly dense photonic integrated circuits.     

Numerical demonstration of slow light tuning in slotted photonic crystal waveguide using microfluidic infiltration

Tuning of the operating wavelength of slow light in the slotted photonic crystal waveguide using microfluidic infiltration has been investigated. Using 2D plane wave expansion method, we numerically demonstrate that the operating wavelength can be shifted from the C to L band, simply by choosing the refractive index of the infiltrated fluid. It is also found that, as the refractive index of the infiltrated fluid changes, the group velocity dispersion has slight variation at different operating wavelength. This design opens the possibility for post-fabrication scheme of tuning the operating wavelength of slow light in slotted photonic crystal waveguide, and allows the device to be optimized for different applications.     

二维介质柱光子晶体波导吸收边界条件

设计优化了用于截断二维正方格子介质柱光子晶体波导的分布布拉格反射波导的结构.二维时域有限差分数值模拟结果显示，在上述两种波导联接处的反射系数可以在大部分光子晶体波导导波的频谱范围内降到1％以下.将这种分布布拉格反射波导和通常的吸收边界条件相结合可以构成用于光子晶体波导的吸收边界条件，其反射率可以降低到-40dB以下，吸收层的厚度可取为晶格长度的1.3倍. 关键词： 吸收边界条件 光子晶体波导 时域有限差分     

Single mode lasers based on monolithic integration of ridge waveguides with 2D photonic crystal waveguides

The monolithic combination of active light sources with photonic crystal (PC) waveguide components is a key building block for future highly integrated photonic circuits. We demonstrate the coupling of light from an InGaAs/AlGaAs ridge waveguide laser to a monolithically integrated 2D PC waveguide. The PC guide is formed by removing three or five rows in a triangular lattice of air rods etched into the semiconductor. A tapered ridge waveguide geometry is demonstrated to improve coupling efficiency, so that maximum output powers of up to 10 mW from the PC waveguide are achieved. The resulting coupled cavity laser shows single mode emission with side mode suppression ratios > 35 dB over a broad range of injection currents.     

Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.     

Wideband and low dispersion slow light in slotted photonic crystal waveguide

We present a procedure to generate wideband and low dispersion slow light in slotted photonic crystal waveguide. By shifting the first and second rows of air holes of slotted photonic crystal waveguide, the bandwidth of slow light can be increased, with small group velocity dispersion. Using 2D plane wave expansion method, we numerically demonstrate slow light with the nearly constant group indices of 23, 42, and 54 over 17.6 nm, 6.7 nm and 3.3 nm bandwidth, respectively. The maximal normalized delay-bandwidth product is 0.26. From the fabrication's point of review, shifting the position of holes is easier to be controlled technically than changing the diameters of air holes. In addition, our simulations suggest this design is tolerant to deviation for positions of the first two rows of air holes. Therefore, the proposed approach decreases the dependence on the fabrication accuracy.     

Silicon-based two-dimensional photonic crystal waveguides

A review of the properties of silicon-based two-dimensional (2D) photonic crystals is given, essentially infinite 2D photonic crystals made from macroporous silicon and photonic crystal slabs based on silicon-on-insulator basis. We discuss the bulk photonic crystal properties with particular attention to the light cone and its impact on the band structure. The application for wave guiding is discussed for both material systems, and compared to classical waveguides based on index-guiding. Losses of resonant waveguide modes above the light line are discussed in detail.     

Slow light transmission in a photonic crystal power splitter with parallel outputs

In this paper, we investigate coupling of light to slow modes in a photonic crystal power splitter composed of a Y-junction and two 60° bends. First, a combination of two cascaded bends which is commonly used in integrated photonic crystal circuits is studied in slow light frequency regime. We propose a structure that its transmission spectrum covers the high group-index frequencies near the band edge. Also, by structural modifications, high transmission near to 95% is achieved in slow light bandwidth. Next, we study the complete structure of a photonic crystal power splitter with parallel outputs based on a Y-junction integrated with two 60° bends. Using modified bends and reducing sharpness of Y-junction, the efficiency of splitting increases in both high and low group-index frequency bands. The optimized structure has an average efficiency of 82% in slow mode regime. This structure can be used in photonic crystal based slow light devices, such as Mach-Zehnder interferometers.     

Slow light performance enhancement of graphene-based photonic crystal waveguide

We propose a graphene-based photonic crystal (PC) slow light waveguide, which is realized by creating periodical air holes in a silicon layer to achieve spatially varying chemical potentials of graphene. The structure is optimized around 30 THz, and a large group index of 166.6 is obtained, with a very low propagation loss of ?2.1 dB/um. The corresponding normalized delay-bandwidth product reaches as high as 4.00. Furthermore, the slow light performance can be dynamically tuned by changing a bias voltage. The center frequency of the slow light waveguide can be tuned between 19.1 THz and 27.4 THz. Our results suggest that graphene-based PC structures are very promising for slow light devices.     

Influences of supercell termination and lateral row number on the determination of slow light properties of photonic crystal waveguides

We systematically analyze the effects of the use of an inaccurate supercell termination and an insufficient supercell size of plane-wave expansion method on the dispersion and the slow light properties of the photonic crystal waveguides. The inattentive use of supercells of photonic crystal waveguides appeared in the literature is found to be yielding errors in the dispersion and slow light characteristics of the fundamental guided mode of photonic crystal waveguides. In addition, extra modes appear in the photonic band gap of the photonic crystal waveguide due to inaccurate supercell termination. By examining the field distribution of the modes, the extra modes can be determined and removed from the band diagram. The dispersion, group index and bandwidth characteristics are observed to be less affecting from inaccurate supercell termination as the number of rows adjacent to the waveguide increases. Moreover, the dispersion and the group index-frequency curves of the fundamental guided mode of correctly terminated supercells are found to be converging as the lateral row number along the line-defect is increased.