Kinetic studies on the formation of cyclic oligomers in poly(ethylene terephthalate)

The mechanism of cyclic oligomer formation has been kinetically studied by determining the rate of the formation of cyclic oligomers during melt of poly(ethylene terephthalate) (PET) at several levels of average molecular weight, which were obtained by fractionation and did not initially contain oligomers. The experimental rate equation of cyclic oligomer formation was introduced and then compared with the rate equation derived theoretically. The close agreement between the two equations suggested that the cyclic oligomer formation takes place according to cyclodepolymerization by the action of hydroxyl end groups in PET. The relation is represented as [C] = m·[OH]₀·t^1–n, where [C] is the concentration of cyclic oligomers, [OH]₀ is the initial concentration of hydroxyl end groups, m and n are constants, and t is melting time. A method has also been developed for separating cyclic oligomers from PET using dimethylformamide (DMF) as a solvent.     

Protecting and Leaving Functions of Trimethylsilyl Groups in Trimethylsilylated Silicates for the Synthesis of Alkoxysiloxane Oligomers

The concept of protecting groups and leaving groups in organic synthesis was applied to the synthesis of siloxane‐based molecules. Alkoxy‐functionalized siloxane oligomers composed of SiO₄, RSiO₃, or R₂SiO₂ units were chosen as targets (R: functional groups, such as Me and Ph). Herein we describe a novel synthesis of alkoxysiloxane oligomers based on the substitution reaction of trimethylsilyl (TMS) groups with alkoxysilyl groups. Oligosiloxanes possessing TMS groups were reacted with alkoxychlorosilane in the presence of BiCl₃ as a catalyst. TMS groups were substituted with alkoxysilyl groups, leading to the synthesis of alkoxysiloxane oligomers. Siloxane oligomers composed of RSiO₃ and R₂SiO₂ units were synthesized more efficiently than those composed of SiO₄ units, suggesting that the steric hindrance around the TMS groups of the oligosiloxanes makes a difference in the degree of substitution. This reaction uses TMS groups as both protecting and leaving groups for SiOH/SiO⁻ groups.     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001     

Homogeneous polyesters of predetermined length,composition, and sequence: Model synthesis of alternating glycolic-acid-co-(L)-lactic-acid oligomers

Methods for making monodisperse polyester copolymers of predetermined length, com-position, and sequence are reported. Alternating oligomers of (L)-lactic-co-glycolic acid (La-co-Gl), isosteric with polypeptides, are prepared by solution methods of protecting, coupling, and deprotecting alcohol and acid groups. The carboxylic acid is protected by benzyl ester formation and released by hydrogenation. The hydroxyl group is protected as the methoxyethoxyethyl ether and deprotected with sodium iodide and trimethylsilyl chlo-ride. Coupling uses dicyclohexylcarbodiimide. End-capped alternating oligomers containing ? (GILa)₄? and ? (GILa)₈? show polymer properties. They are noncrystalline oils that exhibit discernable T_g. The conformation of ? GILa? and ? LaGl? diads in the polyesters is shown to be similar to isosteric peptide diads ? GlyAla? and ? AlaGly? . Exactly structured, monodisperse polyesters suggest a chemical parallel to proteins. Designed struc-tural templates combining sheet-form ? (Gl)_n? and helical ? (La)_n? segments are at-tractive synthesis targets. The solution preparations reported here can be applied, but it is suggested that biosynthetic methods for introducing single ester units into peptide chains be adapted to synthesize precisely fashioned polyesters. © 1995 John Wiley & Sons, Inc.     

Michael addition for crosslinking of poly(caprolactone)s

Poly(caprolactone) (PCL) networks have received significant attention in the literature because of many emerging potential applications as biodegradable materials. In this study, the Michael addition reaction was used for the first time to synthesize biodegradable networks using crosslinking of acetoacetate‐functionalized PCL (PCL bisAcAc) oligomers with neopentyl glycol diacrylate. Hydroxyl‐terminated PCL telechelic oligomers with number‐average molecular weights ranging from 1000 to 4000 g/mol were quantitatively functionalized with acetoacetate groups using transacetoacetylation. In addition to difunctional PCL oligomers, hydroxyl‐terminated trifunctional star‐shaped PCL oligomers were functionalized with acetoacetate groups. Derivatization of the terminal hydroxyl groups with acetoacetate groups was confirmed using FTIR spectroscopy, ¹H NMR spectroscopy, mass spectrometry, and base titration of hydroxyl end groups. PCL bisAcAc precursors were reacted with neopentyl glycol diacrylate in the presence of an organic base at room temperature. The crosslinking reactions yielded networks with high gel contents (>85%). The thermomechanical properties of the networks were analyzed to investigate the influence of molecular weight between crosslink points. The glass transition and the extent of crystallinity of the PCL networks were dependent on the molecular weight of the PCL segment. Dynamic mechanical analysis indicated that the plateau modulus of the networks was dependent on the molecular weight of PCL, which was related to the crosslink density of the networks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5437–5447, 2009     

Extension of the chain‐end,free‐volume theory for predicting glass temperature as a function of conversion in hyperbranched polymers obtained through one‐pot approaches

Compared with linear polymers, more factors may affect the glass‐transition temperature (T_g) of a hyperbranched structure, for instance, the contents of end groups, the chemical properties of end groups, branching junctions, and the compactness of a hyperbranched structure. T_g's decrease with increasing content of end‐group free volumes, whereas they increase with increasing polarity of end groups, junction density, or compactness of a hyperbranched structure. However, end‐group free volumes are often a prevailing factor according to the literature. In this work, chain‐end, free‐volume theory was extended for predicting the relations of T_g to conversion (X) and molecular weight (M) in hyperbranched polymers obtained through one‐pot approaches of either polycondensation or self‐condensing vinyl polymerization. The theoretical relations of polymerization degrees to monomer conversions in developing processes of hyperbranched structures reported in the literature were applied in the extended model, and some interesting results were obtained. T_g's of hyperbranched polymers showed a nonlinear relation to reciprocal molecular weight, which differed from the linear relation observed in linear polymers. T_g values decreased with increasing molecular weight in the low‐molecular‐weight range; however, they increased with increasing molecular weight in the high‐molecular‐weight range. T_g values decreased with increasing log M and then turned to a constant value in the high‐molecular‐weight range. The plot of T_g versus 1/M or log M for hyperbranched polymers may exhibit intersecting straight‐line behaviors. The intersection or transition does not result from entanglements that account for such intersections in linear polymers but from a nonlinear feature in hyperbranched polymers according to chain‐end, free‐volume theory. However, the conclusions obtained in this work cannot be extended to dendrimers because after the third generation, the end‐group extents of a dendrimer decrease with molecular weight. Thus, it is very possible for a dendrimer that T_g increases with 1/M before the third generation; however, it decreases with 1/M after the third generation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1235–1242, 2004     

Thermomechanical behavior of a polyphenylquinoxaline

Crosslinking of linear poly[2,2′-(1,4-phenylene)-6,6′-bis(3-phenylquinoxaline)] (PPQ) by isothermal heat exposure in the temperature range between 425 and 490°C was investigated by means of torsional braid analysis. The change in glass transition temperature due to isothermal exposure was used as a kinetic parameter. In order to determine the effect of molecular weight and type of polymer chain ends, three PPQ samples were prepared that differed only in molecular weight and polymer chain endgroups. The apparent activation energy of isothermal crosslinking was independent of molecular weight and chain endings. Its value of 60 kcal/mole is the same as that for the thermal degradation of PPQ (determined by isothermal weight loss measurements). The rates of change of T_g at a particular temperature, however, are a function of both molecular weight (at least for these polymers that do not have a sufficiently high molecular weight) and the type of polymer chain ends. It was observed that isothermally crosslinked PPQ gave a higher break point in the TGA curve and also an increased char yield at 800°C than the linear precursor.     

L-乳酸齐聚物的制备及其三羰基铼衍生物的合成

以L-丙交酯为原料, 通过正交保护基对其羧基、羟基进行修饰, 合成并表征了乳酸3个系列的12个化合物. 同时以合成得到的乳酸六聚体为原料, 合成并表征了羟基封端的聚乳酸-聚乙二醇-三齿螯合剂系列化合物, 并将其与[Et₄N]₂[Re(CO)₃Br₃]配位合成了其冷标记三羰基铼配合物. 产物通过IR, ¹H NMR, ¹³C NMR, ESI-HRMS, MALDI-HRMS或元素分析进行了表征. 该方法为扩展聚乳酸化学修饰法在材料科学中的应用奠定了基础. 此外分子量可控的乳酸-乙二醇结构铼配合物的设计合成扩展了其在分子影像科学的应用.     

Polymerization by oxidative coupling. IV.. Synthesis and properties of poly(2-methyl-6-phenylphenylene ether)

Copper-amine catalyst systems which polymerize 2-methyl-6-phenylphenol to high molecular weight polymer are described. With CuCl and N,N,N ′,N′-tetramethyl-1,3-butanediamine (TMBD), an intrinsic viscosity of 1.56 dl/g was obtained. Faster rates of polymerization resulted with a CuBr-TMBD catalyst. Catalysts from other tertiary amines and mixtures of tertiary amines also produced high polymer. Pyridine and diethylamine catalyst were less active. Samples of polymer were isolated at different stages of the polymerization. Measurements of viscosity, osmotic pressure, light scattering, gel permeation, hydroxyl groups, nitrogen content, and chemical reactivity were made on the samples. Below a molecular weight value of M?_n 60,000, M?_n/M?_w was 2.0. At higher molecular weights, there was a broadening in molecular weight distribution. No major change in the molar concentration of the “;head” endgroups with increasing molecular weight was detected by infrared analysis. However, nitrogen analyses, chemical reactivity studies, and the M?_n/M?_w ratio suggested the chemical nature of the “head” end had changed. The relationships between intrinsic viscosity in chloroform at 25°C and M?_n and M?_w for unfractionated polymer samples are log [η] = ?4.26 + 0.84 log M?_n and log [η] = ?3.86 + 0.70 log M?_w.     

Anionic syntheses of terminally functionalized ethylene oligomers

Synthetic procedures for preparation of terminally functionalized linear ethylene oligomers are described. The preferred synthetic method is anionic oligomerization of ethylene with n-butyllithium–tetramethylethylenediamine and electrophilic substitution of the living oligomer so-formed. Conditions and procedures for subsequent chemistry to elaborate the end groups of these oligomers are described. These procedures afford strictly linear ethylene oligomers which contain a wide variety of end groups and which range in molecular weight from 1000 to 4500 (M_n). The product oligomers were characterized spectroscopically as toluene-d₈ solutions at 110°C using multinuclear NMR, FT-IR, fluorescence, and UV-visible spectroscopies as appropriate. Alternative stepwise approaches to such oligomers are also discussed.     

Synthesis of macrocyclic molecular brushes with amphiphilic block copolymers as side chains

Macrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) consisting of macrocyclic poly(2‐hydroxylethyl methacrylate) (c‐PHEMA) as backbone and polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) amphiphilic block copolymers as side chains were synthesized by the combination of atom transfer radical polymerization (ATRP), click chemistry, and single‐electron transfer nitroxide radical coupling (SET‐NRC). First, a linear α‐alkyne‐ω‐azido heterodifunctional PHEMA (l‐HC?C‐PHEMA‐N₃) was prepared by ATRP of HEMA using 3‐(trimethylsilyl)propargyl 2‐bromoisobutyrate as initiator, and then chlorine end groups were transformed to ? N₃ group by nucleophilic substitution reaction in DMF in the presence of an excess of NaN₃. The 3‐trimethylsilyl groups could be removed in the presence of tetrabutylammonium fluoride, and the product was cyclized by “click” chemistry in high dilution conditions. The hydroxyl groups on c‐PHEMA were transferred into bromine groups by esterification with 2‐bromoisobutyryl bromide and then initiate the ATRP of styrene. The formed macrocyclic molecular brushes c‐PHEMA‐g‐PS were coupled with the TEMPO‐PEO to afford the target macrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) by SET‐NRC, and the efficiency is as high as 80～85%. All of the intermediates and final product were characterized with ¹H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography in details © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Molecular modelling of hyperbranched polyacetylene

Ab initio and density functional theory calculations carried out on linear and dendritic polyacetylenic (PA) oligomers of different size showed that acetylenic dendrimers are less stable than trans‐PA oligomers and that the instability increases with molecular weight reflecting the strain in crowded hyperbranched structures. However, the energy difference between linear and dendritic structure is rather small and tends to a limit with molecular weight. Twisting of the double bonds decreases the conjugation in hyperbranched PA compared to linear trans‐PA. However, the conjugation though less effective than in trans‐PA is extended up to the 4^th or 5^th generation of dendrimers. It was shown that bromine end groups strongly affect the electronic properties of acetylenic dendrimers decreasing even more the conjugation due to the sterical hindrances, however, highly polarizable bromine atoms reduced significantly the adiabatic potentials of ionization to be very close to that for trans‐PA oligomers.     

Oxidative NHC-Catalysis as Organocatalytic Platform for the Synthesis of Polyester Oligomers by Step-Growth Polymerization

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (M_n) in the range of 1.5–7.8 kg mol⁻¹ as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.     

Synthesis of linear and starlike polymers from poly(propylene glycol) methacrylate using controlled radical polymerization

The copper‐catalyzed atom transfer radical polymerization (ATRP) of poly(propylene glycol) methacrylate (PPGM) in solution to produce linear and starlike polymers is reported, using methylethyl ketone as the solvent and a temperature of 80 °C. The ATRP system used was efficient for polymerization of the functionalized monomer without protecting hydroxyl end groups of monomer. The polymerizations were consistent with “living” or controlled processes, as revealed by the linear evolution of molecular weight with conversion. Increasing the [M]₀:[I]₀ ratio resulted in increasing molecular weights, whereas the polydispersity indices remained low (M_w/M_n < 1.4) even at high conversion. Decreasing the [CuBr]₀:[I]₀ ratio resulted in lower conversions, slightly larger polydispersities, and decreased molecular weights, likely resulting from a lower initiation efficiency. Polymers were characterized by ¹H and ¹³C NMR; molecular weights of polymers with low degrees of polymerization were estimated by end‐group analysis from ¹³C NMR spectra obtained using distortionless enhancement by polarization transfer and the gated decoupling techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 334–343, 2002     

Synthesis and enzymatic degradation of end-functionalized biodegradable polyesters

End-functionalization of biodegradable polymers/oligomers based on L-lactide and glycolide by cholesteryl moiety was investigated. We established the feasibility of preparing the functionalized polymers/oligomers, Chol-(LG)_m+n, through ring-opening copolymerization initiated by cholesterol bearing a hydroxyl group, without adding any catalyst. The functionalized polymers/oligomers of different molecular weights were obtained by controlling the feed ratio of the initiator cholesterol to the monomers. The chemical structure of end-functionalized polymers/oligomers was confirmed by FTIR and ¹H NMR. Incorporation of cholesteryl moiety into the polymer chains induces liquid crystallinity in the resultant oligomers when the molecular chains are not very long. The enzymatic degradation studies, for all the samples, were carried out using enzyme, proteinase K. Interestingly, the enzymatic degradation of cholesteryl end-functionalized polymers/oligomers resulted in a lamella-like porous structure on the sample surface, which is altogether different from the commonly reported spherical-pore structure formed during the degradation of conventional polyesters.     

The iterative synthesis of discrete dimethylsiloxane oligomers: A practical guide

Discrete dimethylsiloxane oligomers are interesting building blocks for the synthesis of high χ–low N block co-oligomers (BCOs) forming highly organized nanostructures. Here, a practical guide to the synthesis of molecularly defined oligodimethylsiloxanes (oDMS) from 7-mer to 40-mer via a linear growth strategy is described. The iteration of a hydroxylation reaction and the condensation of mono- or bifunctional hydroxysiloxanes with chloro-octamethyltetrasiloxane results in asymmetric and symmetric siloxanes, respectively. The synthesis contains critical washing and purification steps to remove minor amounts of low and high-molecular weight byproducts, which are detected using Fourier transform infrared spectrometry, gas chromatography–mass spectrometry, and size-exclusion chromatography. The oligomers are obtained on a multigram scale in yields of 94–50% and in high purity with only one molar mass detected. The formation of the chloride, hydroxide or hydride functional groups is adequately analyzed using ²⁹Si NMR spectroscopy. The hydride terminated siloxane oligomers are used in Karstedt catalyzed hydrosilylation reactions with alkene-functional substrates to obtain oDMS-based oligomers and BCOs. Byproduct formation as a result of isomerization and reduction are followed by ¹H NMR spectroscopy and minimized using dry conditions and low-catalyst loadings.     

1H and 13C NMR of PMMA macromonomers and oligomers - end groups and tacticity

¹H NMR and ¹³C NMR have been used to study the end groups and tacticity in PMMA macromonomers and oligomers. These macromonomers are terminated almost exclusively in one vinylidene group per chain. The end group signals from the macromonomers are identified in both the ¹³C and ¹H NMR spectra. The spectra of the purified oligomers (n = 1-4) were used to aid in assignment. The macromonomers are predominantly syndiotactic, and the tacticity measured is consistent with Bernoullian statistics. The tetramer is a mixture of r and m isomers in a 4:1 ratio. It is shown that T₁ experiments can provide a useful method of distinguishing resonances due to low molecular weight impurities from those due to stereochemical or isomeric effects in macromonomers. The absence of internal double bonds was confirmed by isomerizing the vinylidene group of several oligomers and of the macromonomer, and verifying the absence of the isomerized signals in the NMR spectra of the original materials.     

Synthesis of Liquid Crystalline Epoxy Oligomers: Effect of Molecular Weight on the Phase Behavior

A series of epoxy‐terminated liquid crystalline oligomers with different molecular weights having α‐methylstilbene as the mesogenic unit were synthesized and characterized by means of ¹H NMR and FT‐IR spectroscopy, differential scanning calorimetry (DSC), polarized‐light optical microscopy (POM) and X‐ray diffraction. The effect of the initial ratio between epichlorohydrin and diol on the molecular weight was not significant enough to change the thermal behavior of the oligomers essentially. The copolymerization of epoxy‐ and hydroxyl‐terminated comonomers yielded high‐molecular weight oligomer, whose enantiotropic liquid crystalline character was proved by means of DSC, POM and X‐ray diffraction.     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002