弛豫铁电体介电可调性的研究

无铅弛豫铁电体具有较好的介电可调性,在顺电相有较大的介电常数和极小的损耗,因较大的优值而被广泛地用于微波器件.根据现有的介电可调性理论,通过参量的适当修正,对介电可调性的表达式做了合理的探讨,结论适用于处理实验结果.比较发现,在电场作用下顺电相保持不变的近似得出的结论与实验结果差距较大,而转化为铁电相与实验结果完全吻合.考虑外加电场和自发极化对弹性吉布斯自由能的修正,导出了高电场对介电常数的修正关系,与实验结果相符.提出了介电可调度的概念与计算公式,能够定量表示掺杂对介电可调性的影响.     

聚合物结构转变中的介电信息

聚合物的一级结构为理想完整的长分子链；其中的电子和离子贡献快极化效应.长链的拓扑形变给出二级结构，而三级结构由许多形变后的链组成，聚合物的二和三级结构贡献的都是慢极化.冷冻时域介电谱方法证明，在聚合物的β转变中二和三级结构软化，但一级结构不变.这种方法可将冷冻于聚合物中的各快和慢分量分开. 关键词：     

梳型聚合物液晶的介电反应

计算了梳型聚合物双轴丝状相液晶侧链的扭曲缺陷能,对处于外电场的侧链,将其哈密顿量与一维Ising模型相比较,得到侧链在外电场中的极化率.结果表明,聚合物的电极化率远大于普通液晶.在低温下,两者之间的比值趋于聚合度N.对弛豫时间的计算表明,聚合物液晶的极化达到饱和的时间很长,在低温下是普通液晶的N倍,而介电损耗出现的频率则为普通液晶的1/N倍. 关键词：     

钇和镧掺杂氧化铝陶瓷的热导及其介电弛豫特性研究

采用氧化物固相反应法,制备出纯氧化铝陶瓷及其分别掺杂稀土元素钇和镧的陶瓷样品.测量了样品的结构、介电特性和热导性能;研究了烧结温度对掺杂不同稀土元素的陶瓷样品的性能的影响.X射线衍射结果表明1500℃烧结后陶瓷样品形成了单一的固溶体.而氧化铝的热导率达到8.60W/（m·K）,样品的介电性能稳定.我们发现掺杂Y³⁺和La³⁺的氧化铝陶瓷存在介电弛豫现象,并对该现象进行了机理分析.     

非线性光学聚合物的电晕极化与弛豫特性研究

本文研究了非线性光学聚合物薄膜的极化过程,对影响电晕极化的因素进行了细致分析;利用紫外-可见吸收光谱研究了极化薄膜的弛豫特性。比较了三种聚合物体系的极化与弛豫特性。     

弛豫铁电体弥散相变的玻璃化特性研究

根据弛豫铁电材料在相变区域的介电弥散行为和玻璃化 液体材料在过冷状态下黏度与温度的行为所共同满足的Vogel-Fulcher 函数关系, 分析了施主替代钛酸钡系列陶瓷的缺陷补偿原理, 通过引入玻璃化液体的构型熵概念, 研究了弛豫铁电材料中钛阳离子缺陷作用势的温度关系, 得到了如下结论: 施主掺杂含量的增加导致了无序度的增加, 钛离子缺陷浓度的增大和平均极性区域尺寸的减小; 在构型熵满足Vogel-Fulcher 函数关系的条件下, 温度越低, 钛离子缺陷作用的范围越大, 极化区域也越大. 缺陷作用的范围随温度的变化导致了弛豫铁电材料的弥散性. 温度下降到一定程度, 冻结效应发生, 介电弥散现象消失.     

两种不同(Ba,Sr)TiO3薄膜介电-温度特性的研究

研究并比较了两种不同(Ba0.5,Sr0.5)TiO3(BSTO)薄膜介电-温度特性.采用脉冲激光沉积技术在Pt/Ti/SiO2/Si(100)衬底上制备BSTO薄膜,发现制备条件的不同,可以得到介电性质完全不同的BSTO薄膜.在550℃和氮气氛下制备的BSTO薄膜在常温下具有很高的介电常数,在10kHz下,超过2500,并在200K温度以上介电常数基本不变.它的一些电学性质不同于在正常条件(650℃和氧气氛下)制得的BSTO薄膜,而类似于目前广泛报道的巨介电常数材料如CaCu3Ti4O12.两种薄膜介电性质测试结果表明: 氧气氛下制备的BSTO薄膜呈现铁电-顺电相变,符合居里-外斯定律;低温氮气氛下制备的BSTO薄膜,介电弛豫时间和温度的关系符合德拜模型,是热激发弛豫.文中给出了产生这种介电特性的初步解释.     

VDF（52）／TrFE（48）铁电共聚物的非晶介电弛豫

用液氮淬火和热处理方法制得结晶度相差较大的铁电共聚物ＶＤＦ（５２）／ＴｒＦＥ（４８）试样。介导弛豫研究提示室温以下共聚物的频率谱由低频和高频两部分组成。低频部由非晶区被冻结分子链段的微布郎运动贡献。符合ＷＬＦ方程；高频部由晶区分子链段较小尺度的局域运动产生，遵从Ａｒｒｈｅｎｉｕｓ规律。分峰拟合结果得到共聚物的玻璃化转变温度为－２４℃，局域弛豫活化能为４６．１ｋＪ／ｍｏｌ．     

PT-PEK-c电光聚合物薄膜的厚度和介电性质

研制了新的PT-PEK-c电光聚合物薄膜材料,用准波导耦合m线方法测量了PT-PEK-c电光聚合物薄膜的厚度,并测量了该聚合物薄膜在1×10²Hz到1×10⁷Hz频率范围内的室温介电常数.测量结果为:厚度d=2.328±0.315μm,在10KHz下,介电常数ε_r＝4023±0.063,介电损耗tanδ＝0.003.     

On the theory of the universal dielectric relaxation

Dielectric relaxation has been investigated within the framework of a modified mean field theory, in which the dielectric response of an arbitrary condensed matter system to the applied electric field is assumed to consist of two parts, a collective response and a slowly fluctuating response; the former corresponds to the cooperative response of the crystalline or noncrystalline structures composed of the atoms or molecules held together by normal chemical bonds and the latter represents the slow response of the strongly correlated high-temperature structure precursors or a partially ordered nematic phase. These two dielectric responses are not independent of each other but rather constitute a dynamic hierarchy, in which the slowly fluctuating response is constrained by the collective response. It then becomes clear that the dielectric relaxation of the system is actually a specific characteristic relaxation process modulated by the slow relaxation of the nematic phase and the relationship governing such a process can be defined as the universal dielectric relaxation law. Furthermore, we have shown that seemingly different relaxation relationships, such as the Debye relaxation law, the Cole-Cole equation, the Cole-Davidson equation, the Havriliak-Negami relaxation, the Kohlrausch-Williams-Watts function, Jonscher’s universal dielectric relaxation law, etc. are only the variants of this universal law under different circumstances.     

Levy (stable) probability densities and mechanical relaxation in solid polymers

Early investigations by Weber, R. and F. Kohlrausch, Maxwell, and Boltzmann of relaxation in viscoelastic solids are reviewed. A two-state model stress-tensor describing strain coupling to internal conformations of a polymer chain is used to derive a linear response version of the Boltzmann superposition principle for shear stress relaxation. The relaxation function of Kohlrausch(t)= exp[–(t/ )] is identical to the Williams-Watts empirical dielectric relaxation function and in the model corresponds to the autocorrelation function of a segment's differential shape anisotropy tensor. By analogy with the dielectric problem, exp[–(t/ )] is interpreted as the survival probability of a frozen segment in a swarm of hopping defects with a stable waiting-time distributionAt ^– for defect motion. The exponent a is the fractal dimension of a hierarchical scaling set of defect hopping times. Integral transforms of(t) needed for data analysis are evaluated; the cosine and inverse-Laplace transforms are stable probability densities. The reciprocal kernel for short-time compliance is discussed.Reference 1 contains a thorough discussion of historical background.     

Ionic conduction and dielectric relaxation in Ag/Na ion-exchanged aluminosilicate glasses: mixed mobile ion effect and KWW relaxation

Ag⁺/Na⁺ ion-exchanged aluminosilicate glasses with uniform concentration profiles were prepared, and their electrical conductivities were investigated as functions of the ion-exchange ratio and the initial glass compositions. In the case of the ion-exchanged glasses of x20Ag₂O–(1−x)20Na₂O–10Al₂O₃–70SiO₂ in mol%, the conductivity, σ, and its activation energy, E_σ, showed a minimum and a maximum at the same ion-exchange ratio x=0.3, respectively, and the mixed mobile ion effect (MMIE) was observed. The fully ion-exchanged sample attained σ=3.5×10⁻⁵ S/cm at 200 °C, which was 1.5 orders of magnitude larger than that of initial glass. In the case of x25Ag₂O–(1−x)25Na₂O–25Al₂O₃–50SiO₂, the mixed mobile ion effect was also observed at x=0.5. The maximum conductivity of 2×10⁻⁴ S/cm at 200 °C was obtained in the fully ion-exchanged glass sample.

The electric relaxation analysis was also conducted on both systems, and Kohlrausch–Williams–Watts (KWW) fractional exponent β was obtained as a function of x. The decrease of β was observed near x≈0.3 in the former system, while that of the later system was independent of the ion-exchange ratio. Based on the structural analysis results, the observed behaviors were investigated from the point of view of the occupation of Ag⁺ ions on the non-bridging oxygen-site (NBO-site) and the charge compensation-site (CC-site) of AlO₄ tetrahedral unit.     

激子旋转弛豫对低掺杂卟啉侧链聚合物荧光衰变过程的影响

利用激子旋转扩散理论研究了一类低掺杂卟啉侧链聚合物中卟啉侧链基团的旋转对其发光动力学过程的影响.研究表明,卟啉侧链基团的旋转行为是导致激发态无辐射能量弛豫的重要途径.基团旋转越容易,能量弛豫速度越快,这可导致一个快速的荧光衰变动力学过程.在卟啉低掺杂浓度和聚合物分子链间距离较大的情况下,卟啉侧链基团的旋转成为影响荧光寿命和发光效率的主要因素.对实验测得的两种样品的荧光弛豫过程进行了拟合,理论结果与实验结果符合较好. 关键词： 激子旋转弛豫 瞬态荧光 卟啉侧链聚合物     

Influence of molecules with chloro group on the associative liquid methanol: A dielectric relaxation approach

The dielectric relaxation parameters, viz., static dielectric constant, ɛ, and relaxation times, τ, have been determined for chlorobenzene-methanol (CB-MET), 1,2 dichloro ethanemethanol (DE-MET) and dimethylene chloride-methanol (DC-MET) mixtures with thirteen different concentrations at three temperatures, viz., 15, 25 and 45°C. The experimental technique used for this work was the time domain reflectometry (TDR) in the frequency range of 10 MHz to 20 GHz using the Hewlett Packard HP 54750 sampling oscilloscope. The information regarding hydrogen bonding structural behavior in MET due to CB, DE and DC are obtained by using the theoretical models based on the excess properties. The data suggest that CB and DE are not influenced by hydrogen bonding in MET whereas DC is influenced by the hydrogen bonding mechanism in MET. It appears that the behavior of DC on MET is different from CB and DE in MET.     

Ac electrical conductivity and dielectric relaxation behavior of amorphous Selinum36 Antimony31Cubber33 thin films

ABSTRACT

The alternating-current (Ac) conductivity measurements and dielectric behaviors were observed in the range of temperature (from 303 to 393?K) and in the frequency range from 10² to10⁶?Hz for amorphous films of Selinum₃₆ Antimony₃₁ Cubber₃₃ chalcogenide glass. The ac conductivity has temperature dependency and the frequency dependency. The reduction of the exponent S values with raising temperature was introduced with the correlated barrier hopping model. The maximum height of the barrier W_M for Sellinum₃₆ Antimony₃₁Cubber₃₃ films is reliable with carrier hopping over a potential barrier. The number of localized states per unit volume at the Fermi level enhances with the elevation of ambient temperature of the film sample. Both dielectric constant ε₁ and loss ε₂ increase with the rise of temperature rising and decrease with frequency. The computation of the dielectric modulus M^/ and M^// revealed that the interfacial is the most suitable polarization type.     

Oxygen-vacancy-related dielectric relaxation and conduction mechanisms in Bi5TiNbWO15 ceramics

This paper reports that the intergrowth ceramics Bi5TiNbWO15 （BW-BTN） have been prepared with the conventional solid-state reaction method. The dielectric and conductivity properties of samples were studied by using the dielectric relaxation and AC impedance spectroscopy in detail. Two distinct relaxation mechanisms were detected both in the plots of dielectric loss （tanδ） and the imaginary part （Z″） versus frequency in the frequency range of 10 Hz-13 MHz. We attribute the higher frequency relaxation process to the hopping process of the oxygen vacancies inside the grains, while the other seems to be associated with the space charges bound at the grain boundary layers. The AC impedance spectroscopy indicates that the conductivities at 625 K for bulk and grain boundary are about 1.12 × 10^-2 S/m and 1.43 × 10^-3 S/m respectively. The accumulation of the space charges in the grain boundary layers induces a space charge potential of 0.52 eV.     

Optical,structural characterization and dielectric relaxation of [C2H5NH3]2ZnCl4 compound

ABSTRACT

The new organic-inorganic compound [C₂H₅NH₃]₂ZnCl₄ has been grown by the slow evaporation at room temperature. The zero-dimensional (0-D) structure for this compound was determined by the single X-ray diffraction. It crystallizes at room temperature in the non-centrosymmetric space group Pna2₁ and consists of ethylammonium cations [C₂H₅NH₃]⁺ and [ZnCl₄]^2? tetrahedra anions. That is interconnected by means of hydrogen bonding contacts N-H···Cl. The molecular geometry and vibrational frequencies of [ZnCl₄]^2? and [C₂H₅NH₃]⁺ in the ground state was calculated using density functional method (B3LYP) with 6–31G(d) and 6–311G (d,p) basis set. The optimized geometric bond lengths and bond angles, obtained by using B3LYP/6–311G (d,p), show the best agreement with the experimental data. The optical absorbance was measured in order to deduce the absorption coefficient α, optical band gap E_g. The optical band gap is determined by extrapolating the plotted graph of (αhυ)^1/2 vs. (hυ). The large value of indirect optical band gap energy indicates the insulating nature of this material. Moreover, the extinction coefficient, refractive index and the dielectric permittivity of [C₂H₅NH₃]₂ZnCl₄ compound were calculated and the results are discussed. The evolution of the dielectric loss as a function of frequency revealed a distribution of relaxation times, probably ascribed to the reorientational dynamics of alkyl chains in this compound, and then analyzed with the Cole–Cole formalism.