A double wavelength DFB laser with an identical active area for CWDM

A novel distribute feedback (DFB) laser which gave two different wavelengths under two distinct work conditions was fabricated. The laser consists of two Bragg gratings with different periods corresponding to wavelength spacing of 20 nm in an identical active area. When driving current was injected into one of the different sections separately, two different wavelengths at 1542.4 and 1562.5 nm were realized. The side mode suppression ratio (SMSR) of 45 dB or more both for the two Bragg wavelengths were achieved. The fabricating process of the laser was just the same as that of traditional DFB laser diode. This device can be potentially used in coarse wavelength division multiplexer (CWDM) as a promising light source and the technology idea can be used to enlarge the transmission capacity in metro area network (MAN).     

CWDM source based on AlGaInAs/InP monolithically integrated DFB laser array

The monolithic integration of four 1.5?μm range AlGaInAs/InP distributed feedback lasers with a 4×1 multimode-interference optical combiner, a curved semiconductor optical amplifier, and an electro-absorption modulator using relatively simple technologies--sidewall grating and quantum well intermixing--has been demonstrated. The four channels span the wavelength range of 1530 to 1566?nm with a channel spacing of 12?nm. The epitaxial structure was designed to produce a far-field pattern as small as 21.2°×25.1°, producing a coupling efficiency with an angled-end single-mode fiber at twice that of a conventional device design.     

High accuracy wavelength locking of a DFB laser using tunable polarization interference filter

A temperature-tunable polarization interference filter (PIF) made of YVO4 crystal has been presented and applied for wavelength locking of a distributed feedback (DFB) semiconductor laser in dense wavelength-division-multiplexing (DWDM) optical communication systems. This new design offers a flexible way to monitor and then lock an operating wavelength of DFB laser to any preselected point without dead spots. The results show that the laser wavelength can be locked with accuracy better than ±0.01 nm with much relaxed requirement on temperature stability of the filter.     

Application of sampled grating to control the lasing wavelength in complex-coupled DFB laser

This paper reports that the complex-coupled distributed feedback laser with the sampled grating has been designed and fabricated. The +1st order reflection of the sampled grating is utilized for laser single mode operation, which is 1.5387~μ m in the experiment. The typical threshold current of the device is 30~mA, and the optical output power is about 10~mW at the injection current of 100~mA.     

Precise wavelength tuning of a dye laser using an active diffractive optical element

In this work, an active, reflecting diffraction grating was developed and characterized. A grating was holographically imposed onto the surface of a ceramic which could be deformed via the transverse, inverse piezoelectric effect, thus allowing active fine tuning of the grating constant. The tuning characteristics of this novel optical element were studied and the results compared with the linear theory of the piezoelectric effect. To demonstrate its applicability, the grating was installed in a dye laser and used to effect precise tuning of the output wavelength of the laser within a range of 220 pm. The possibility of quasi-static to high frequency operation of the system will allow this element to find use in a wide variety of applications.     

Holographic DFB laser with fan-shaped grating for a spectrofluorimeter

A method for recording fan-shaped transmitting phase holographic gratings that ensure tuning of the wavelength of emission for a DFB (distributed-feedback) dye laser is presented. Traditional optical elements are used in the scheme of grating recording. A change in the degree of grating fanning is reached here without replacement of gratings. The possibility of obtaining frequency-tuned emission by means of the fan-shaped gratings created is demonstrated experimentally. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 67, No. 1, pp. 48–51, January–February, 2000.     

DFB fiber laser hydrophone with band-pass response

A distributed-feedback fiber laser hydrophone with band-pass response is presented. The design of the hydrophone aims to equalize static pressure and eliminate signal aliasing of high-frequency acoustic components. Theoretical analysis is presented based on electro-acoustic theory. The experimental results agree well with the theory. The measured underwater responses show that the hydrophone has a pressure sensitivity of -170 dB re:pm/μPa over a bandwidth between 100 Hz and 500 Hz. A sensitivity reduction exceeding -35 dB is observed at 2500 Hz. The tested static pressure sensitivity of the hydrophone is -226 dB. The proposed fiber laser hydrophone of this kind is expected to have important application in deep water fiber-optic sonar systems with anti-aliasing, and the understanding gained through this work can be extended to a guide of hydrophone design for required filtering bandwidth.     

Fabrication of low threshold current monolithic DFB laser with an MMI combiner

We fabricate low threshold current monolithic distributed feedback(DFB) laser with a multi-mode interface(MMI) combiner using butt-joint metal-organic chemical vapor deposition technology with different waveguide structures. Multi-layer mask self-aligned photolithography technology is used to form different waveguides in active and passive regions, respectively. The result shows that the laser threshold current is lower than 10 m A, with 50 d B side-mode suppression ratio.     

A reconfigurable multiwavelength fiber laser with switchable wavelength channels and tunable wavelength spacing

We report the experimental demonstration of a reconfigurable multiwavelength fiber laser source with switchable wavelength channels and tunable wavelength spacing by spectrum slicing a broadband light source using a tunable comb filter. The tunable comb filter is based on a thermally-induced linearly-chirped fiber Bragg grating (LCFBG). As an example to demonstrate the effectiveness of the method, two wavelength channels with various wavelength spacings and eight wavelength channels with ∼1.6 nm wavelength spacing were experimentally demonstrated. All the wavelength channels have rejection ratios of greater than 20 dB, and very small 3-dB linewidths of ∼10 pm. The multiwavelength optical source has such unique advantages as simple all-fiber structure, switchable wavelength channels, tunable wavelength spacing, very narrow linewidths, and stable room-temperature operation.     

Metalens for coaxial double wavelength focusing

We propose a metalens for coaxial double wavelength focusing.One focusing spot is a circular solid spot,and the other focusing spot is a doughnut-shaped spot that is circling the solid spot.The designed metalens was composed of a met a-molecular nanostructured cell array.Each meta-molecular nanostructured cell was divided into four squares.Two slots with exactly the same shape,but usually with the rotation angle measured clockwise from the positive x axis,are etched into the gold film in two diagonally connected squares.Another two slots with the same shape but with the rotation angle measured counter-clockwise from the positive x axis are etched into another two diagonally connected squares in the same cell.The lasers with two different wavelengths are trans?formed into right-handed and left-handed circularly polarized beams,respectively.The two sets of slots with different azimuthal rotations modulated the phases of incident right-handed and left-handed circularly polarized beams independently.The numerical simulation with finite-difference time-domain(FDTD) software was carried out,and the experimental verification was also implemented.Both the experimental result and the numerical simulation agree well with the theoretical design.     

A horn ridge waveguide DFB laser with reduced spatial hole burning for high-speed modulation

In this paper, we propose a DFB laser with a horn ridge waveguide (HRW) to suppress the longitudinal spatial hole burning (LSHB) effect in the lasers cavity, thus to reduce the rolloff at low frequency. The simulation result shows that HRW DFB lasers could significantly suppress the LSHB effect and its modulation bandwidth is increased by 14% comparing with the conventional straight ridge waveguide (RW) DFB lasers when the normalized coupling coefficient (κL) is 3.0. The calculated eye diagrams of HRW DFB lasers under direct 25 Gbps modulation have clearer opening than that of the conventional RW DFB lasers. These superior properties are due to the suppression of the LSHB effect by the HRW structure.     

A fibre grating DFB laser for generation of optical microwave signal

A distributed feedback fibre laser is realised with a phase-shifted fibre Bragg grating. Dual-mode operation is obtained by means of linear birefringence for heterodyne generation of optical microwave signal. The two modes, operating in the same cavity produce a beat signal with exceptionally low-phase noise. The linewidth of the resulting microwave signal obtained is less than 1 kHz.     

用双棱镜测激光波长的简单方法

对传统的双棱镜测激光波长实验进行改进,用He-Ne激光器代替钠灯,去掉狭缝,用屏或墙代替移测显微镜,并采用一次成像法测两虚光源间的距离.改进后的装置简便易行,现象明显.     

Integrated electroabsorption-modulated DFB laser by using an improved butt-joint method

An improved butt coupling method is used to fabricate an electroabsorption modulator (EAM) monolithically integrated with a distributed feedback (DFB) laser. The obtained electroabsorption-modulated laser (EML) chip with the traditional shallow ridge exhibits very low threshold current of 12 mA, output power of more than 8 mW, and static extinction ratio of -7 dB at the applied bias voltage from 0.5 to -2.0 V.     

Stabilized DFB laser system with large tuning range

We propose, design, and realize a compact stabilized laser system that can be tuned within 24 GHz automatically.This laser system consists of two distributed feedback(DFB) lasers, one of which is reference and locked to the D2 line of ~(87)Rb, the other laser is a slave that is locked to the reference laser via a loop servo. We measured the frequency of the beating signal of the two lasers and generated an error signal, which controlled the frequency of the slave laser to close the loop. We compressed the fluctuation of the beating signal's frequency to less than 1 MHz.Furthermore, the system can also automatically determine and control whether the slave is red detuned or blue detuned to the reference. The dimensions of our laser system are about 15 cm × 20 cm × 10 cm. This kind of laser system can be applied in many important applications, such as atomic interferometer and cold atomic clock.     

Integrated electroabsorption-modulated DFB laser by using an improved butt-joint method

An improved butt coupling method is used to fabricate an electroabsorption modulator (EAM) monolithically integrated with a distributed feedback (DFB) laser.The obtained electroabsorption-modulated laser (EML) chip with the traditional shallow ridge exhibits very low threshold current of 12 mA, output power of more than 8 mW,and static extinction ratio of-7 dB at the applied bias voltage from 0.5 to -2.0 V.     

灵敏的基于分布反馈式半导体激光波长调制光声光谱

利用室温下单模运行的近红外半导体二极管激光,报导了波长调制共振光声光谱结合二次谐波探测技术.实验系统应用到乙炔探测,在1个标准大气压和3毫瓦平均光功率以及3毫秒锁相积分时间条件下其探测灵敏度可达10ppm(体积比),归一化到激光功率和系统带宽最小可探测吸收为4.0×10-8Wcm-1/Hz,并且实验中发现系统最佳压力响应值在2.66×104Pa附近.本实验装置可有效的消除光声光谱系统中常见的窗片和光声腔壁吸收入射光而引起的背景噪声.此外,相对于其他方法我们描述的基于半导体激光共振光声光谱具有很大的优点,为进一步发展便利、实用、便携式环境监测仪器奠定了坚实的基础.     

一种用于Yb:YAG激光器的波长分离膜的研制

以1 030 nm高反,940,980 nm高透的波长分离膜作为实例,为提高该薄膜元件的波长分离效果,从膜系的优化方面做了一系列的研究,诸如采用带通滤光片的设计思想,在膜堆两侧加入了匹配层,调整膜堆的周期厚度,并用膜系设计软件对通带作进一步的优化.通过这一系列的优化设计后,利用RF双离子束溅射工艺在BK7玻璃基底上沉积样品薄膜,并在基底背面加镀通带增透膜.结果显示,透射带在940和980 nm处的透过率分别为97.73%和93.63%,反射带在1 030 nm的反射率为99.99%.对所制备的样品薄膜进行了激光损伤阈值测量,得到了35 J/cm2(1 064 nm,12 ns)的结果.     

Bistability in wavelength using an electro-optically tuned dye laser

Bistability in wavelength is demonstrated using a Rh 6 G dye laser tuned electro-optically with an intra-cavity modulator. Laser emission occurs on two wavelengths that can be switched between them by a change in the level of light input. Multistable mode is also possible. The characteristics of the system are discussed. They show that the discrimination between the two wavelengths attached to the stable states can be performed easily. Further prospects deal with bulk systems operating with low driving voltages.     

Resonant photoacoustic detection of trace gas with DFB diode laser

A resonant photoacoustic detection system based on a low-power distributed feedback diode laser is developed. This sensor has been applied to the detection of acetylene (C₂H₂) using a specifically designed photoacoustic cell operating on its second longitudinal mode. The minimum detectable limit of about 10 parts-per-million volume (SNR=1) is achieved with an average laser power of 3.5 mW at atmospheric pressure, and an integration time constant of 3 ms; thus, the minimum detectable absorption coefficient normalised by power and bandwidth is 4.0×10⁻⁸ W cm⁻¹/√Hz. The optimum operating pressure buffered with N₂ is also investigated. The realisation of our system is described and experimental results are compared with different modulation techniques and other results reported in the literature. A number of issues arising from the conventional use of mechanical chopping of the beam can be effectively suppressed in wavelength modulation PA spectroscopy (WM-PAS) and second harmonic detection.