Electronic and thermodynamic and elastic properties of pyrite RuO2

This paper calculates the elastic,thermodynamic and electronic properties of pyrite (P a3ˉ) RuO2 by the plane-wave pseudopotential density functional theory (DFT) method.The lattice parameters,normalized elastic constants,Cauchy pressure,brittle–ductile relations,heat capacity and Debye temperature are successfully obtained.The Murnaghan equation of state shows that pyrite RuO2 is a potential superhard material.Internal coordinate parameter increases with pressure,which disagrees with experimental data.An analysis based on electronic structure and the pseudogap reveals that the bonding nature in RuO2 is a combination of covalent,ionic and metallic bonding.A study of the elastic properties indicates that the pyrite phase is isotropic under usual conditions.The relationship between brittleness and ductility shows that pyrite RuO2 behaves in a ductile matter at zero pressure and the degree of ductility increases with pressure.     

NaZn13型Fe基化合物的结构和热力学性质研究

利用Chen-Mbius晶格反演获得的原子间相互作用势,对NaZn13型Fe基金属间化合物进行原子级模拟研究.计算结果表明,Si原子和Co原子均优先占据96i晶位,Si原子和Co原子替代Fe原子后晶体平均结合能降低.随着Co含量的增加,LaFe13-x-yCoySix和NdFe13-x-yCoySix的晶格参数逐渐降低.声子态密度中,稀土原子主要激发低频模,Si原子主要激发高频模.LaFe11.5-yCoySi1.5化合物的德拜温度随Co含量的增加而增高.     

First-principles investigation on the elastic stability and thermodynamic properties of Ti₂SC

Using Vanderbilt-type plane-wave ultrasoft pseudopotentials within the generalized gradient approximation(GGA) in the frame of density functional theory(DFT),we have investigated the crystal structures,elastic,and thermodynamic properties for Ti2SC under high temperature and high pressure.The calculated pressure dependence of the lattice volume is in excellent agreement with the experimental results.The calculated structural parameter of the Ti atom experienced a subtle increase with applied pressures and the increase suspended under higher pressures.The elastic constants calculations demonstrated that the crystal lattice is still stable up to 200 GPa.Investigations on the elastic properties show that the c axis is stiffer than the a axis,which is consistent with the larger longitudinal elastic constants(C 33,C 11) relative to transverse ones(C 44,C 12,C 13).Study on Poisson’s ratio confirmed that the higher ionic or weaker covalent contribution in intra-atomic bonding for Ti2SC should be assumed and the nature of ionic increased with pressure.The ratio(B/G) of bulk(B) and shear(G) moduli as well as B/C 44 demonstrated the brittleness of Ti2SC at ambient conditions and the brittleness decreased with pressure.Moreover,the isothermal and adiabatic bulk moduli displayed opposite temperature dependence under different pressures.Again,we observed that the Debye temperature and Gru¨neisen parameter show weak temperature dependence relative to the thermal expansion coefficient,entropy,and heat capacity,from which the pressure effects are clearly seen.     

NaZn13型Fe基化合物的结构和热力学性质研究

利用Chen-Mbius晶格反演获得的原子间相互作用势,对NaZn₁₃型Fe基金属间化合物进行原子级模拟研究.计算结果表明,Si原子和Co原子均优先占据96i晶位,Si原子和Co原子替代Fe原子后晶体平均结合能降低.随着Co含量的增加,LaFe_13-x-yCo_ySi_x和NdFe_13-x-yCo_ySi_x的晶格参数逐渐降低.声子态密度中,稀土原子主要激发低频模,Si原子主要激发高频模.LaFe_11.5-yCo_ySi_1.5化合物的德拜温度随Co含量的增加而增高. 关键词： 晶格反演 原子间相互作用势 热力学性质 磁致冷材料     

First-principles investigation on the elastic stability and thermodynamic properties of Ti2SC

Using Vanderbilt-type plane-wave ultrasoft pseudopotentials within the generalized gradient approximation（GGA） in the frame of density functional theory（DFT）,we have investigated the crystal structures,elastic,and thermodynamic properties for Ti2SC under high temperature and high pressure.The calculated pressure dependence of the lattice volume is in excellent agreement with the experimental results.The calculated structural parameter of the Ti atom experienced a subtle increase with applied pressures and the increase suspended under higher pressures.The elastic constants calculations demonstrated that the crystal lattice is still stable up to 200 GPa.Investigations on the elastic properties show that the c axis is stiffer than the a axis,which is consistent with the larger longitudinal elastic constants（C 33,C 11） relative to transverse ones（C 44,C 12,C 13）.Study on Poisson＇s ratio confirmed that the higher ionic or weaker covalent contribution in intra-atomic bonding for Ti2SC should be assumed and the nature of ionic increased with pressure.The ratio（B/G） of bulk（B） and shear（G） moduli as well as B/C 44 demonstrated the brittleness of Ti2SC at ambient conditions and the brittleness decreased with pressure.Moreover,the isothermal and adiabatic bulk moduli displayed opposite temperature dependence under different pressures.Again,we observed that the Debye temperature and Gru篓neisen parameter show weak temperature dependence relative to the thermal expansion coefficient,entropy,and heat capacity,from which the pressure effects are clearly seen.     

Structural, elastic, phonon, and electronic properties of MnPd alloy

The structural, elastic, phonon, and electronic properties of MnPd alloy have been investigated by using the first-principles calculations. The calculated lattice constants and electronic structure are in good agreement with the experimental results. The microscopic mechanism of the diffusionless martensitic transition from the paramagnetic B2 (PM-B2) phase to the antiferromagnetic L1₀ (AFM-L1₀) phase through the intermediate paramagnetic L1₀ (PM-L1₀) phase has been explored theoretically. The obtained negative shear modulus C′= (C₁₁-C₁₂)/2 of the PM-B2 phase is closely related to the instability of the cubic B2 phase with respect to the tetragonal distortions. The calculated phonon dispersions for PM-L1₀ and AFM-L1₀ phases indicate that they are dynamically stable. However, the AFM-L1₀ phase is energetically most favorable according to the calculated total energy order, so the PM-L1₀ !AFM-L1₀ transition is caused by the magnetism rather than the electron–phonon interaction. Additionally, the AFM-L1₀ state is stabilized through the formation of a pseudo gap located at the Fermi level. The calculated results show that the CuAu-I type structure in the collinear antiferromagnetic state is dynamically and mechanical stable, thus is the low temperature phase.     

Structural, elastic, phonon and electronic properties of a MnPd alloy

The structural, elastic, phonon and electronic properties of a MnPd alloy have been investigated using the first-principles calculation. The calculated lattice constants and electronic structure agree well with the experimental results. The microscopic mechanism of the diffusionless martensitic transition from the paramagnetic B2 (PM-B2) phase to the antiferromagnetic L10 (AFM-L10) phase through the intermediate paramagnetic L10 (PM-L10 ) phase has been explored theoretically. The obtained negative shear modulus C′= (C11-C12)/2 of the PM-B2 phase is closely related to the instability of the cubic B2 phase with respect to the tetragonal distortions. The calculated phonon dispersions for the PM-L10 and AFM-L10 phases indicate that they are dynamically stable. However, the AFM-L10 phase is energetically most favorable according to the calculated total energy order, so the PM-L10 →AFM-L10 transition is caused by the magnetism rather than the electron-phonon interaction. Additionally, the AFM-L10 state is stabilized through the formation of a pseudo gap located at the Fermi level. The calculated results show that the CuAu-I type structure in the collinear antiferromagnetic state is dynamically and mechanically stable, thus is the low temperature phase.     

Cr2MC(M=Al, Ga)的电子结构、弹性和热力学性质的第一性原理研究

本文使用第一性原理的GGA/RPBE方法研究了Cr₂MC(M=Al, Ga)的电子结构、弹性和热力学性质. 研究发现两个化合物的体积压缩性几乎相同, 并且证实了在0—50 GPa范围内c轴始终较a轴更难以压缩并且结构始终是稳定的. 通过对内坐标的研究发现了Cr₂AlC中Cr离子的内坐标始终大于Cr₂GaC中Cr离子的内坐标. 使用准谐德拜模型得到的体弹模量在0 GPa下随着温度的升高而减小, 而在300 GPa下则随着温度的升高而增大. 对德拜温度的研究发现Cr₂GaC的值小于Cr₂AlC的值, 而对热膨胀系数、Grüneisen参数、熵和热容的计算发现Cr₂GaC的值大于Cr₂AlC的值. 对电子结构的分析发现Cr₂GaC的s和p电子在费米能级处的值大于Cr₂AlC的s和p电子的值, 而其他离子的电子分布几乎一致.     

Pb-Sn合金及Pb的热力学性质的第一性原理计算

本文基于第一性原理的密度泛函理论(DFT)和密度泛函微扰理论(DFPT)方法,利用虚晶近似的计算方法研究了Pb-Sn合金的晶格结构、电子能带、声子能带及热力学性质,并用晶格能量差可与达到熔化温度时的振动能量相当的固-液相变机理研究了熔化温度,同时与所计算Pb的所有结果进行了对比.     

First-principles calculation of the lattice compressibility, elastic anisotropy and thermodynamic stability of V2GeC

We investigate the elastic and the thermodynamic properties of nanolaminate V2GeC by using the ab initio pseudopotential total energy method.The axial compressibility shows that the c axis is always stiffer than the a axis.The elastic constant calculations demonstrate that the structural stability is within 0-800 GPa.The calculations of Young’s and shear moduli reveal the softening behaviour at about 300 GPa.The Possion ratio makes a higher ionic or a weaker covalent contribution to intra-atomic bonding and the degree of ionicity increases with pressure.The relationship between brittleness and ductility shows that V2GeC is brittle in ambient conditions and the brittleness decreases and ductility increases with pressure.Moveover,we find that V2GeC is largely isotropic in compression and in shear,and the degree of isotropy decreases with pressure.The Grüneisen parameter,the Debye temperature and the thermal expansion coefficient are also successfully obtained for the first time.     

Lattice stabilities,mechanical and thermodynamic properties of Al_3Tm and Al_3Lu intermetallics under high pressure from first-principles calculations

The effects of high pressure on lattice stability, mechanical and thermodynamic properties of L1_2 structure Al_3Tm and Al_3Lu are studied by first-principles calculations within the VASP code. The phonon dispersion curves and density of phonon states are calculated by using the PHONONPY code. Our results agree well with the available experimental and theoretical values. The vibrational properties indicate that Al_3Tm and A_3Lu keep their dynamical stabilities in L1_2 structure up to 100 GPa. The elastic properties and Debye temperatures for Al_3Tm and Al_3 Lu increase with the increase of pressure. The mechanical anisotropic properties are discussed by using anisotropic indices AG, AU, AZ, and the threedimensional(3D) curved surface of Young's modulus. The calculated results show that Al_3Tm and Al_3Lu are both isotropic at 0 GPa and anisotropic under high pressure. In the present work, the sound velocities in different directions for Al_3Tm and Al_3Lu are also predicted under high pressure. We also calculate the thermodynamic properties and provide the relationships between thermal parameters and temperature/pressure. These results can provide theoretical support for further experimental work and industrial applications.     

La3Ga5SiO14晶体的介电性质、弹性与压电性质

研究了La3Ga5SiO14晶体的介电性质、弹性和压电性质，其中弹性和压电性质是利用高频振动模式通过谐振法测定的. 关键词： 介电性质 弹性 压电性质     

Construction of embedded-atom-method interatomic potentials for alkaline metals （Li,Na,and K） by lattice inversion

The lattice-inversion embedded-atom-method interatomic potential developed previously by us is extended to alkaline metals including Li,Na,and K.It is found that considering interatomic interactions between neighboring atoms of an appropriate distance is a matter of great significance in constructing accurate embedded-atom-method interatomic potentials,especially for the prediction of surface energy.The lattice-inversion embedded-atom-method interatomic potentials for Li,Na,and K are successfully constructed by taking the fourth-neighbor atoms into consideration.These angular-independent potentials markedly promote the accuracy of predicted surface energies,which agree well with experimental results.In addition,the predicted structural stability,elastic constants,formation and migration energies of vacancy,and activation energy of vacancy diffusion are in good agreement with available experimental data and first-principles calculations,and the equilibrium condition is satisfied.     

First-principles calculation of elastic and thermodynamic properties of Ni2MnGa Heusler alloy

The equilibrium lattice parameter, heat capacity, thermal expansion coefficient and bulk modulus of Ni 2 MnGa Heusler alloy are successfully obtained using the first-principles plane-wave pseudopotential (PW-PP) method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus B and temperature T up to 800 K and obtain the relationship between bulk modulus B and pressure at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure and decreases with increasing temperature. The pressure dependence of heat capacity C v and thermal expansion α at various temperatures are also analysed. Finally, the Debye temperature of Ni 2 MnGa is determined from the non-equilibrium Gibbs function. Our calculated results are in excellent agreement with the experimental data.     

双温度氩-氮等离子体热力学和输运性质计算

获得覆盖较宽温度和压力范围内的等离子体热力学和输运性质是开展等离子体传热和流动过程数值模拟的必要条件.本文通过联立Saha方程、道尔顿分压定律以及电荷准中性条件求解等离子体组分;采用理想气体动力学理论计算等离子体热力学性质;基于Chapman-Enskog方法求解等离子体输运性质.利用上述方法计算了压力为0.1, 1.0和10.0 atm (1 atm=101325 Pa),电子温度在300—30000 K范围内,非局域热力学平衡(电子温度不等于重粒子温度)条件下氩-氮等离子体的热力学和输运性质.结果表明压力和非平衡度会影响等离子体中各化学反应过程,从而对氩-氮等离子体的热力学及输运性质有较大的影响.在局域热力学平衡条件下,计算获得的氩-氮等离子体输运性质和文献报道的数据符合良好.     

First-principles calculations of elastic,phonon and thermodynamic properties of W

We investigate the elastic properties, lattice dynamical, thermal equation of state and thermodynamic properties of bcc phase W under high pressure using density functional theory. The calculated high-pressure elastic constants of bcc phase W agree well with experimental and theoretical data. Under compression, the phonon dispersion curves of bcc phase W do not show any anomaly or instability. Our calculated zero-pressure phonon dispersion curves are in excellent agreement with experiments. Within the quasiharmonic approximation, we predict the thermal equation of state and other properties including the thermal expansion coefficient, adiabatic bulk modulus, specific heat at constant volume and entropy.     

First-principles investigations on elastic and thermodynamic properties of zinc-blende structure BeS

In this paper the elastic and thermodynamic properties of the cubic zinc-blende structure BeS at different pressures and temperatures are investigated by using \textit{ab initio} plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated results are in excellent agreement with the available experimental data and other theoretical results. It is found that the zinc-blende structure BeS should be unstable above 60GPa. The thermodynamic properties of the zinc-blende structure BeS are predicted by using the quasi-harmonic Debye model. The pressure-volume-temperature ($P-V-T$) relationship, the variations of the thermal expansion coefficient $\alpha$ and the heat capacity $C_{V}$ with pressure $P$ and temperature $T$, as well as the Gr\"{u}neisen parameter-pressure-temperature ($\gamma -P-T$) relationship are obtained systematically in the ranges of 0--90GPa and 0--2000K.     

高温高压下Ag-Mg-Zn合金中金属间化合物的微观结构与热动力学性质的第一性原理计算

采用基于密度泛函理论的第一性原理计算方法,研究了Ag-Mg-Zn合金中金属间化合物AgMg,Mg4Zn8和Ag8Mg4Zn4在高温高压下的结构稳定性、弹性性能和热动力学性质.理论计算结果与实验值和其他的理论结果符合得非常好.研究表明:金属间化合物AgMg,Mg4Zn8和Ag8Mg4Zn4在零温零压下是力学稳定的;Mg4Zn8和Ag8Mg4Zn4为延性相,而AgMg则为脆性相;在这三种金属间化合物中,Ag8Mg4Zn4的塑性最好,AgMg的塑性最差.利用准谐Debye模型,讨论了高温高压下Ag-Mg-Zn合金中金属间化合物的摩尔振动内能Uvib,m,摩尔Helmholtz振动自由能Avib,m,摩尔振动熵Svib,m,摩尔定容热容Cv,m,摩尔定压热容Cp,m,热膨胀系数α,Griüneisen 参量γ和Debye温度(O).     

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.     

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.