具有InAlAs浸润层的InGaAs量子点的制备和特性研究

采用自组装方法生长了一种新型的InGaAs量子点/InAlAs浸润层结构.通过选取合适的In组分 ，使InAlAs浸润层的能级与GaAs势垒相当，从而使浸润层的量子阱特征消失.通过低温光致 发光（PL）谱的测试分析得到InGaAs量子点/InAlAs浸润层在样品中的确切位置.变温PL谱的 研究显示，具有这种结构的量子点发光峰的半高全宽随温度上升出现展宽，这明显区别于普 通InGaAs量子点半高全宽变窄的行为.这是因为采用了InAlAs浸润层后，不仅增强了对InGaA s量子点的限制作用，同时切断了载流子的 关键词： InGaAs量子点 InAlAs浸润层 PL谱     

GaAs层引入InAs/Inp量子点有序生长机制的研究

本文对张应变GaAs层引入使InAs/Inp量子点有序化排列的机制进行了分析.为提高InAs/Inp自组装量子点特性提供了理论依据.     

InAs/GaAs和InAs/InxGa1-xAs/GaAs纳米线异质结构的生长研究

利用金辅助金属有机化学气相沉淀法(MOCVD)在GaAs(111)B衬底上分别制备了InAs/GaAs和InAs/In _{x Ga1-xAs/GaAs(0≤x≤1)纳米线异质结构.实验结果显示,直接生长在GaAs纳米线上的InAs纳米线生长方向杂乱或者沿着GaAs纳米线侧壁向衬底方向生长,生长的含有In x Ga1-xAs组分渐变缓冲段的InAs/In x Ga1-x关键词： 纳米线异质结构 xGa1-xAs')" href="#">InxGa1-xAs 组分渐变缓冲层 金属有机化学气相沉淀法}     

InAs/GaAs自组织量子点的DLTS谱

将DLTS用于对InAs/GaAsQD结构样品的测量,测定了QD能级发射载流子的热激活能;获得了QD能级俘获电子过程伴随有多声子发射(MPE)、QD能级存在一定程度的展宽、以及在某些特定的生长条件下,存在亚稳生长构形的实验证据.结果表明:DLTS在QD体系的研究中有其特有的功能     

多层GaSb(QDs)/GaAs生长中量子点的聚集及发光特性

通过对多层GaSb量子点的生长研究,发现随着生长层数的增加,量子点尺寸逐渐变大,密度没有明显变化,并且量子点出现了聚集现象;当层数增加到一定数量、量子点聚集到一定大小时,聚集的量子点处会出现空洞。这些现象表明,各层量子点在生长过程中存在关联效应,并且GaAs层不能很好地覆盖在聚集的量子点之上,在继续生长其它量子点层时,聚集的量子点处在高温下出现GaSb的蒸发,从而出现空洞。PL谱出现了很宽的量子点发光峰,这很可能是由于多层量子点在生长时大小分布较宽而导致的结果。     

GaAs半导体表面的等离子氮钝化特性研究

采用射频(RF)等离子方法,对Ga As样品进行了150 W高功率等离子氮钝化及快速退火处理。经过该方法钝化后的样品,光致发光(PL)强度上升了91%。XPS分析得出,Ga As样品表面的氮化效果随着氮等离子体功率的增加而逐渐趋于明显。氮化后的样品表面未发现氧化物残余。样品在空气中加热放置30 d,PL强度下降不明显,说明表面钝化层具有良好的稳定性。     

多孔硅的制备条件对其光致发光特性的影响

不同的实验条件下制备的多孔硅的光致发光(PL)特性是不同的,这是许多研究产生分歧的主要原因。对比分析了阳极氧化电流密度、阳极氧化时间、溶液浓度以及自然氧化时间对多孔硅光致发光光谱的影响。认为在一定的范围内,多孔硅的发光峰位会随电流密度的增大而蓝移,要获得较强的发光,需要选择合适的电流密度;随着腐蚀时间的延长,多孔硅的发光峰位也发生蓝移。当HF酸的浓度较小时,峰位随浓度的增大表现为向低能移动;而当HF酸的浓度较大时,峰位随浓度的增大则表现为移向高能。多孔硅在空气中自然氧化,其发光峰位发生蓝移,而发射强度随放置时间的延长而降低。并用量子限制模型和发光中心模型对实验结果进行解释。     

InGaAs/GaAs应变量子阱的发光特性研究

利用低压金属有机化学气相沉积技术(LP-MOCVD)生长InGaAs/GaAs单量子阱(SQW),通过改变生长速率、优化生长温度和V/III比改善了量子阱样品的室温光致发光(PL)特性。测试结果表明,当生长温度为600℃、生长速率为1.15μm/h时,生长的量子阱PL谱较好,增加V/III比能够提高量子阱的发光强度。实验分析了在不同的In气相比条件下,生长速率对量子阱质量的影响,利用模型解释了高In气相比时,随着生长速率增加PL谱蓝移现象消失的原因。     

ZnO单晶的微区光致发光特性研究

ZnO单晶材料以其优良的综合性能在光电子器件方面掀起了研究热潮,因此对ZnO单晶的研究具有重要的理论和实践意义。采用激光辐照的方式,对ZnO单晶进行了光致发光(photoluminescence, PL)光谱实验,分析研究了ZnO单晶在不同温度(低温)和不同激光能量强度照射下其光致发光特性。研究结果表明,ZnO单晶内存在少量杂质及表面氧缺陷,这些结构对其发光特性有一定的影响;在低温条件下,ZnO单晶具有良好的发光特性,且随着温度的提高,发光光谱峰的位置会向长波长方向移动,但强度会减小;当激光光源的强度增大,ZnO单晶的PL发射光谱的强度也会随之增大,且峰的位置和相对强度不变。结合拉曼(Raman)光谱实验,从分子及原子振动、转动类型验证了纤锌矿ZnO单晶的六方晶系结构;配合X射线衍射(X-ray diffraction, XRD)技术,得出ZnO单晶良好的结晶特性以及晶轴取向。     

环境参数对翅片管换热器表面结霜特性影响的实验研究

为了解决空气源热泵蒸发器在低温工况下的结霜问题,利用焓差法空调性能实验室搭建翅片管换热器结霜动态特性测试试验台,单独对翅片管换热器进行霜层生长特性影响研究,获得了翅片管换热器表面霜层厚度、结霜量及制冷剂制热能力等参数在不同迎面风速、空气温度及相对湿度情况下的变化规律。为延缓空气源热泵机组结霜、延长机组在低温工况下稳定运行时间提供了依据。     

InAs/GaAs表面量子点的压电调制反射光谱研究

运用压电调制反射光谱(PzR)方法测量了在以GaAs(311)B为衬底的In_0.35Ga_0.65As模板上生长的InAs表面量子点结构的反射谱.在77K温度下，观察到了来自样品各个组成结构(包括表面量子点本身、被覆盖层覆盖的量子点、In_0.35Ga_0.65As模板以及GaAs衬底等)的调制信号.来自表面量子点本身的调制信号是多个清晰的调制峰.用一阶和三阶微分洛伦兹线形对PzR谱中对应结构的实验数据进行了拟合，精确确定了与样品的各个组成结构相对应的调制峰的能量位置.对不同样品PzR谱的差异进行了定性的说明. 关键词： 压电调制光谱 InAs/GaAs 表面量子点 洛伦兹线形拟合     

The improvement of InAs/GaAs quantum dot properties capped by Graphene

InAs self‐assembled quantum dots (QDs) were grown by molecular beam epitaxy on (001) GaAs substrate. Uncapped and capped QDs with GaAs and graphene layers were studied using atomic force microscopy and Raman spectroscopy. Graphene multi‐layer was grown by chemical vapor deposition and transferred on InAs/GaAs QDs. It is well known that the presence of a cap layer modifies the size, shape, and density of the QDs. According to the atomic force microscopy study, in contrast to the GaAs capped sample, which induce a dramatic decrease of the density and height of dots, graphene cap layer sample presents a slight influence on the surface morphology and the density of the islands compared with the uncapped one. The difference shown in the Raman spectra of the samples is due to change of strain and alloy disorder effects on the QDs. Residuals strain and the relaxation coefficients have been investigated. All results confirm the best crystalline quality of the graphene cap layer dots sample relative to the GaAs capped one. So graphene can be used to replace GaAs in capping InAs/GaAs dots. To our knowledge, such study has not been carried out until now. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel method for positioning of InAs islands on GaAs (1 1 0)

A novel method for positioning of InAs islands on GaAs (1 1 0) by cleaved edge overgrowth is reported. The first growth sample contains strained In_xGa_1−xAs/GaAs superlattice (SL) of varying indium fraction, which acts as a strain nanopattern for the cleaved-edge overgrowth. Atoms incident on the cleaved edge will preferentially migrate to InGaAs regions where favorable bonding sites are available. By this method InAs island chains with lateral periodicity defined by the thickness of InGaAs and GaAs of SL have been realized by molecular beam epitaxy (MBE). They are observed by means of atomic force microscopy (AFM). The strain nanopattern's effect is studied by the different indium fraction of SL and MBE growth conditions.     

Mn离子注入InAs/GaAs量子点结构材料的光电性质研究

用高能离子注入(160keV)的方法对InAs/GaAs量子点结构进行掺杂，研究了不同退火工艺处理后量子点的光致发光和电学性能.相对于长时间退火，快速退火处理后的量子点发光通常较强.在相同的退火条件下，量子点发光峰位随着Mn注入剂量的增加，先是往高能量端快速移动，而后发光峰又往低能方向移动.后者可能是由于Mn原子进入InAs量子点，释放了InAs量子点中的应变所致.对于高注入剂量样品和长时间退火样品，变温电阻曲线在40 K附近会出现反常行为. 关键词： 离子注入 InAs/GaAs量子点 光致发光 团簇     

Investigation of populated InAs/GaAs quantum dots by photoluminescence and photoreflectance

We studied self-assembled InAs/GaAs quantum dots by contrasting photoluminescence and photoreflectance spectra from 10 K to room temperature. The photoluminescence spectral profiles comprise contributions from four equally separated energy levels of InAs quantum dots. The emission profiles involving ground state and excited states have different temperature evolution. Abnormal spectral narrowing occurred above 200 K. In the photoreflectance spectra, major features corresponding to the InAs wetting layer and GaAs layers were observed. Temperature dependences of spectral intensities of these spectral features indicate that they originate from different photon-induced modulation mechanisms. Considering interband transitions of quantum dots were observed in photoluminescence spectra and those of wetting layer were observed in photoreflectance profiles, we propose that quantum dot states of the system are occupied up to the fourth energy level which is below the wetting layer quantum state.     

Photoluminescence and lasing properties of InAs/GaAs quantum dots grown by metal-organic chemical vapour deposition

Photoluminescence （PL） and lasing properties of InAs/GaAs quantum dots （QDs） with different growth procedures prepared by metalorganic chemical vapour deposition are studied. PL measurements show that the low growth rate QD sample has a larger PL intensity and a narrower PL line width than the high growth rate sample. During rapid thermal annealing, however, the low growth rate sample shows a greater blueshift of PL peak wavelength. This is caused by the larger InAs layer thickness which results from the larger 2-3 dimensional transition critical layer thickness for the QDs in the low-growth-rate sample. A growth technique including growth interruption and in-situ annealing, named indium flush method, is used during the growth of GaAs cap layer, which can flatten the GaAs surface effectively. Though the method results in a blueshift of PL peak wavelength and a broadening of PL line width, it is essential for the fabrication of room temperature working QD lasers.     

Interband transitions and electronic properties of InAs/GaAs quantum dots embedded in AlxGa1−xAs/GaAs modulation-doped heterostructures

Reflection high-energy electron diffraction, atomic force microscopy, transmission electron microscopy, and double-crystal X-ray curves showed that high-quality InAs quantum dot (QD) arrays inserted into GaAs barriers were embedded in an Al_0.3Ga_0.7As/GaAs heterostructure. The temperature-dependent photoluminescence (PL) spectra of the InAs/GaAs QDs showed that the exciton peak corresponding interband transition from the ground electronic subband to the ground heavy-hole subband (E₁-HH₁) was dominantly observed and that the peak position and the full width at half maximum corresponding to the interband transitions of the PL spectrum were dependent on the temperature. The activation energy of the electrons confined in the InAs/GaAs QDs was 115 meV. The electronic subband energy and the energy wave function of the Al_0.3Ga_0.7As/GaAs heterostructures were calculated by using a self-consistent method. The electronic subband energies in the InAs/GaAs QDs were calculated by using a three-dimensional spatial plane wave method, and the value of the calculated (E₁-HH₁) transition in the InAs/GaAs QDs was in reasonable agreement with that obtained from the PL measurement.     

The preferential formation site of dislocations in InAs/GaAs quantum dots

In this paper, taking elastic anisotropy into consideration, we use a dislocation position dependent model to calculate the preferential formation site of the pure edge and 60° mixed dislocation segment in different shaped InAs/GaAs quantum dots (QDs). From the result, it is clear that for the pure edge dislocations the most energy favorable position is always the base center of the quantum dots. While as to the 60° mixed dislocations, the positions near to the edge of the quantum dot base are the energy favorable area and the exact position is changed with different aspect ratio of the quantum dot.     

Optical investigation of phosphorous-ion-implantation induced InAs/GaAs quantum dots' intermixing

This work reports on InAs/GaAs quantum dots (QDs) intermixing, induced by phosphorous ion implantation and subsequent rapid thermal annealing. The implantation process was carried out at room temperature at various doses (5×¹⁰¹⁰-¹⁰¹⁴ ions/cm²), where the ions were accelerated at 50 keV. To promote the atomic intermixing, implanted samples are subjected to rapid thermal annealing at 675 °C for 30 s. Low temperature photoluminescence (PL) measurements are carried out to investigate the influence of the interdiffusion process on the optical and electronic properties of the QDs. PL emission energy; linewidth and integrated intensity are found to exhibit a drastic dependence on the ion implantation doses. The band gap tuning limit has been achieved for an implantation dose of 5×¹⁰¹³ ions/cm². However, our measurement reveals that the accumulated defects for implantation doses higher than ¹⁰¹² ions/cm² drive the system towards the degradation of the QDs structure's quality.     

InAs quantum dots in GaAs holes: island number dependence on hole diameter and conduction-band coupling estimates

We studied the formation of InAs islands in holes defined by electron-beam lithography on GaAs substrates. The islands grew selectively in the holes, with one to nine islands per hole. The number of islands depends simply on the hole diameter, filling the holes at a constant effective two-dimensional density. We define the ratio of this effective density to the density on an unpatterned control sample to be the selectivity ratio, and we find a selectivity ratio of greater than 1000 for the present samples. We estimated the lateral conduction-band coupling for closely spaced islands and conclude them to be plausible candidates for weakly coupled device building blocks.