Experimental and theoretical investigation of the acoustic performance of sugarcane wastes based material

Agricultural residues present a challenge to the environment. Most of these residues are burnt in the farm causing several pollution hazards to the environment. There has been a lot of interest to find applications for these residues instead of burning them. One application can be using them as acoustic materials. This paper presents the results of the evaluation of the acoustic performance of the sugarcane wastes based material. This evaluation is made by measuring two acoustic parameters: the flow resistivity and the acoustic absorption coefficient. The manufacturing of multiple samples with different physical properties (sample thickness, fiber size, and resin content) allowed evaluating the effect of each property on the acoustical performance of the studied material. A comparison between experimental and theoretical results showed good agreement.     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).     

Utilization of coir fiber in multilayer acoustic absorption panel

Coconut is one of the most important harvests in Malaysia. Industrial prepared coir fiber is obtained from coconut husk combined with latex and other additives to enhance its structural characteristics. Unfortunately, such inevitable process diminishes the acoustical features of material. Previous studies on industrial coir fiber and fiber-air gap layers showed that low frequency absorptions needed improvements. Therefore perforated plate (PP) was added to the multilayer structure to further enhance the sound absorption in this area. Analyses were accomplished through three PP modeling approaches (Allard, Beranek and Ver, Atalla and Sgard) and Allard Transfer Function (TF) method. Experiments were conducted in impedance tube to support the analytical results. Outcomes showed that Allard TF method was generally closer to measurement values and implemented for additional analyses. Two possible conditions of putting PP in front of fiber layer or between fiber-air gap layers were investigated. Both arrangements were suitable to enhance the sound absorption. Although, when PP was backed by coir fiber and air gap, porosity of the plate had great influence in adjusting the amount of low frequency absorption. Result derived that PP might improve the low frequency absorption of coir fiber but at the same time the medium frequency absorption was reduced. This effect was noticed previously in coir fiber-air gap structures while the air gap thickness increased. The advantage of using PP was that it assisted in greatly reducing the air gap thickness under the same acoustical performance. Hence it is an efficient tool to reduce the thickness of acoustic isolators in practical purposes.     

An experimental study of acoustic scattering from thermocline in shallow sea

I.IntroductionThetemperature,salinityandstaticprcssureofscawaterchangewithdepth,whichformsthcsoundvelocityvertica1distributioninthesea.Duringsummcrscason,thercaren0n-uniformthermoclinelaycrsinthedepths0fshallowseaal0ngChinacoast.Wearenowabletodeducctheimpedanccproflle(pc)byechoesofacousticwavesfr0mvarioustherm0c1ine1ayers.Thewaterdcnsityvaricsonlyslight1y,hencetheac0usticve1ocityde-Pendsmainlyonthetemperatureofseawatcr,andthercfore,itispossiblctorecordthcdepthofthermoclinelaycrsbyusingacoust…     

Experimental measurements of acoustical properties of snow and inverse characterization of its geometrical parameters

Snow is a sound absorbing porous sintered material composed of solid matrix of ice skeleton with air (+water vapour) saturated pores. Investigation of snow acoustic properties is useful to understand the interaction between snow structure and sound waves, which can be further used to devise non-destructive way for exploring physical (non-acoustic) properties of snow. The present paper discusses the experimental measurements of various acoustical properties of snow such as acoustic absorption coefficient, surface impedance and transmission losses across different snow samples, followed by inverse characterization of different geometrical parameters of snow. The snow samples were extracted from a natural snowpack and transported to a nearby controlled environmental facility at Patsio, located in the Great Himalayan range of India. An impedance tube system (ITS), working in the frequency range 63–6300 Hz, was used for acoustic measurements of these snow samples. The acoustic behaviour of snow was observed strongly dependent upon the incident acoustic frequency; for frequencies smaller than 1 kHz, the average acoustic absorption coefficient was found below than 0.4, however, for the frequencies more than 1 kHz it was found to be 0.85. The average acoustic transmission loss was observed from 1.45 dB cm⁻¹ to 3.77 dB cm⁻¹ for the entire frequency range. The real and imaginary components of normalized surface impedance of snow samples varied from 0.02 to 7.77 and −6.05 to 5.69, respectively. Further, the measured acoustic properties of snow were used for inverse characterization of non-acoustic geometrical parameters such as porosity, flow resistivity, tortuosity, viscous and thermal characteristic lengths using the equivalent fluid model proposed by Johnson, Champoux and Allard (JCA). Acoustically derived porosity and flow resistivity were also compared with experimentally measured values and good agreement was observed between them.     

An investigation into the acoustic insulation of triple-layered panels containing Newtonian fluids: Theory and experiment

Sound insulation of triple-layered panels consisting of two impervious layers with the middle layer being a Newtonian fluid is studied here both theoretically and experimentally. The progressive impedance model is used to predict the transmission loss (TL) provided by the panel in a normal incidence field. Corrections are then made to obtain the TL values of such panels in random incidence field. A modified B&K impedance tube was constructed for experimental evaluation. Results are presented for a Pyrex glass cylindrical tube containing motor oil, a ferromagnetic nanoparticles fluid (in the absence of a magnetic field) and air. Good agreement is obtained between the measured and analytical results for a wide range of frequencies. Also, a significant difference in TL values, particularly at low frequencies (f ? 4 kHz), is observed once the air is replaced by the fluid layer.     

An analytical model to evaluate the cocktail party effect in restaurant dining rooms: A case study

This paper proposes the use of a simplified analytical model to evaluate acoustic conditions in restaurant dining rooms required for ensuring the intelligibility of conversations. The model is useful for design applications and is suitable for evaluating the maximum number of speakers present in a restaurant room in order to ensure intelligibility of conversations taking place at each table in the presence of background noise caused by conversations at other tables. The maximum number of speakers is studied in relation to the sound level difference between useful and disturbing sound, sound absorption of the room, and the average speaker–listener distance. The model is applied to the case of a dining hall in a multipurpose centre, which is currently in the planning stage.     

隐声衣结构设计和实验研究新进展

隐声衣是一项使物体隐藏于声场的新技术,与传统吸声方式相比,隐声衣消除回波时不会在目标背后留下声影区。隐声衣的物理实现是重点研究方向之一,利用具有特殊性质的材料或结构消除散射是获得隐声效果的主要途径。文章综述了隐声衣研究在结构设计和实验方面的几项新发展。包括基于超常材料的隐声衣、基于温度递度的隐声衣、应用反演设计方法的隐声衣、有源隐声衣等,主要介绍隐声衣机理和结构设计方面的新思想,以及新型人工材料和人工结构在隐声衣研究中的应用。     

Numerical and experimental study on sound absorption by pseudostochastic diffusors

I.IntroductionPseudostochasticdiffusorisaperiodicsurfacestructurewhichconsistsofaseriesofwellsofthesamewidthbutofdifferentdepths,whicharedeterminedaccordingtoapseudthrandomsequence(forexample,quadraticresiduesequence).ItisverifiedfromtheoryandexPerimelltthatthescatteredenergyfromthestructureplaneisindependentofangle.Intheotherhand,theunexpectedhighsoundabsorptionparticularlyatIowfrequencieswasreported.Severalauthorsattemptedtoexplainthephysicalmechanism,however,thesatisfiedpredicationhasnotb…     

Numerical study of a near-zero-index acoustic metamaterial

This Letter studies a two-dimensional, membrane-based acoustic metamaterial with a near-zero refractive index. It yields a frequency-dependent effective density that is near-zero at a narrow frequency band centered around its first resonant frequency. This effective density results in its near-zero refractive index. Numerical simulations are shown which demonstrate that the phase in this metamaterial undergoes small changes, and the metamaterial functions as an angular filter such that only a wave with a near-zero incident angle can transmit. Its ability to tailor acoustic phase pattern is also discussed in this Letter.     

An experimental study on the keyhole shapes in laser deep penetration welding

In this paper, the laser spot diameter and its intensity distribution are measured with a scanning pinhole, and the keyhole shapes are observed using a specially designed setup in laser deep penetration welding of glass GG17. Based on the above experimental results, the effects of the following factors on the keyhole shapes are studied: the laser spot diameter and its intensity distribution, defocus, welding speed and inverse Bremsstrahlung absorption of the plasma.     

Application of the ISO 13472-1 in situ technique for measuring the acoustic absorption coefficient of grass and artificial turf surfaces

This paper presents the applicability of an in situ technique based on ISO 13472-1 standard for measuring the acoustic absorption coefficient of grass and artificial turf surfaces for normal incidence from a sound source. The in situ method is based on acoustic impulse response measurement of the material surface. A maximum length sequence (MLS) signal is played through a loudspeaker and the acoustic response from the surface is recorded using a single microphone. The fast Hadamard transform and fast Fourier transform based digital signal post-processing algorithm provides the acoustic absorption coefficient of the surface under test. The normal incidence acoustic absorption coefficient of a commercial artificial quash surface of Dow Co. obtained from this method was compared with the results from the ASTM E1050 impedance tube method for the same surface. The acoustic absorption coefficients of a test-site grass surfaces were measured for 30 mm and 100 mm length of grass blades in wet and dry soil conditions. Substantial difference in the acoustic absorption coefficient was observed for a similar grass-like artificial surface used for estimating sound power of commercial garden equipments and lawnmowers. The advantage of the in situ method lies in its ability to measure the normal incident acoustic absorption coefficient of any planar surface as installed or in situ. Additionally a quick testing time of less than a minute with the use of a laptop sound card based inexpensive data acquisition system is the main feature of this robust method.     

可见与近红外波段光纤吸收的实验研究

对可见光和近红外波段内光纤的损耗进行了实验研究。采用光纤截断法对多色光在光纤传输过程的损耗进行了实验测量,得到了光纤在可见光波段内吸收系数对波长的变化关系。对在500nm到1000nm的波段内存在的多处光纤吸收峰值给出了相应的解释。     

A new empirical model for the acoustic properties of loose granular media

This paper examines physical parameters of loose granular mixes and their empirical relations to the acoustic performance of these mixes. In this work a new classification of granular media has been proposed which is related to the characteristic particle dimension and the specific density of the grain base. It has been shown that this classification is a useful characteristic for rapid evaluation of the acoustic performance of loose granular mixes. The characteristic impedance and propagation constant have been measured for a representative selection of grain mixes and used to develop a new empirical model. This model relates the above acoustic characteristics to the characteristic particle dimension, porosity, tortuosity and specific density of the grain base, which are routinely measurable parameters. A very good agreement with the experimental data is illustrated in the frequency range of 250-4000 Hz for materials with the grain base of 0.4-3.5 mm and specific densities between 200 and 1200 kg/m³. Unlike many theoretical models for the prediction of the acoustic properties of porous media, the proposed expressions do not involve any special functions of complex argument, empirical shape factors or sophisticated characteristics of porous structure. These are practical enough to be of interest to acoustic and noise control engineers and material manufacturers.     

Investigation studies involving sound absorbing parameters of roadside screen panels subjected to aging in simulated conditions

The paper presents the results of investigation studies involving the impact of atmospheric factors on sound-absorbing parameters of roadside acoustic screen panels. The research studies comprised the aging test consisting of 1000 cycles in simulated conditions, sound absorption measurements and surface morphology tests, using the SEM scanning method. The simulation of aging consisted of 100 or 150 cycles at a time. Then, the panels were investigated in the reverberation chamber to define their sound-absorbing properties. The process was repeated until 1000 cycles were completed. Basing on the carried out tests, a statistical linear model was worked out which was used to estimate the value of a single number sound absorption coefficient after successive aging cycles. The optimality of the model was demonstrated by means of a statistical test confirming normal distribution of random residuals. For the research studies, we employed an innovative structural design of panels for which aging characteristics were obtained. Basing on the obtained results and on the statistical analysis, the prospects to maintain acoustic properties of the panels during their service life was estimated.     

An improved post-filter of acoustic echo canceller based on subband implementation

In this paper, an effective post-filter structure for subband-based acoustic echo cancellation (SAEC) is proposed. Compared with the current subband-based post-filters, the proposed one can more consistently suppress the background noise, as well as the residual echoes. To reduce the effects of the distortion of the near-end speech, two alternative modified versions of the post-filter are proposed, which guarantees the quality of speech communications. The proposed post-filters are seamlessly combined with the subband-based AEC system with quite small computational burden. The instrumental evaluation and listening test both demonstrate the superiority of the post-filters.     

声波团聚净化尿素造粒塔尾气实验研究*

尿素造粒塔大多采用水洗工艺处理尾气粉尘,存在较为严重的细颗粒粉尘溢出和水汽拖尾问题,因此深入探究声波团聚技术在造粒塔尾气处理方面的应用。通过实验研究了声波与喷雾对除尘效率的影响,发现声波单独作用时在3500 Hz达到最佳除尘效率,为74.49%,协同喷雾时2600 Hz即可实现相近的除尘效率,为73.83%。进一步探究其中机理,采用以粒径测试为依据的团聚效率作为评价指标,结果显示,2600 Hz声波与喷雾单独作用时团聚效率分别为30.37%和28.82%,协同作用时团聚效率大幅提升至57.95%。该研究可为后续造粒塔工程改造提供理论与数据支持。     

体育馆声学设计探讨

本文分析了我国综合性体育馆共同的体形特征及其所导致的运用建筑声学时的出现的若干问题，探讨了有关的声学标准，并以工程实践为例，说明必须依靠建筑声学设计和电声设计的结合，才能作好体育馆的声学设计。     

吸声型薄膜声学超材料低频宽带吸声性能研究*

本文根据吸声型薄膜声学超材料的吸声机理，在传统的吸声型薄膜声学超材料结构的基础上引入质量非对称结构， 优化了不同厚度质量片的排布方式，并根据优化结果制备了能够实现低频宽带吸声效果的薄膜声学超材料样品。对其进行声学实验的测试结果显示，样品在 100-1000Hz 频率范围内的平均吸声系数达 0.25，并在 250-800Hz 频率范围内出现了多个共振吸收峰，且实验测得的吸声系数曲线与仿真曲线的趋势有较高的一致性。因此该样品实现了低频宽带吸声。     

Modeling chairs and occupants to closely approximate the sound absorption of occupied full scale theatre chairs

The present work reports on the process of modeling chairs and occupants to closely approximate the sound absorption of occupied full scale theatre chairs and explains how the best form of model listener was determined. Modifying the form of the model listeners to have shorter upper legs and narrower lower legs, led to improved agreement between model and full scale occupied chairs at all frequencies including at 125 Hz. The measured absorption coefficients of single blocks of model chairs with or without model listeners agreed well with the measured values for both full scale types E and G chairs. However, the estimated values for larger sample blocks of model chairs with P/A = 0.5 m⁻¹ showed better agreement with the measured values for full scale type G chairs than type E chairs due to the different slopes of the regression lines versus P/A. The present results demonstrate that the model chair and listener accurately simulate the sound absorption characteristics of a particular type of quite absorptive full scale occupied chairs for all sample sizes of the full scale chairs.