Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.     

Enhanced performance of GaN-based light-emitting diodes with InGaN/GaN superlattice barriers

GaN-based multiple quantum well light-emitting diodes （LEDs） with conventional and superlattice barriers have been investigated numerically. Simulation results demonstrate using InGaN/GaN superlattices as barriers can effectively enhance performances of the GaN-Based LEDs, mainly owing to the improvement of hole injection and transport among the MQW active region. Meanwhile, the improved electron capture decreases the electron leakage and alleviates the efficiency droop. The weak polarization field induced by the superlattice structure strengthens the intensity of the emission spectrum and leads to a blue-shift relative to the conventional one.     

Effects of strain-compensated AlGaN/InGaN superlattice barriers on the optical properties of InGaN light-emitting diodes

In this article, metalorganic chemical vapor deposition (MOCVD)-grown InGaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) with Al_0.03Ga_0.97N and Al_0.03Ga_0.97N/In_0.01Ga_0.99N superlattices-barrier layers on c-plane sapphire were studied for the influence of the strain-compensated barrier on the optical properties of the LEDs. High-resolution X-ray diffraction (HRXRD) analysis shows that the LEDs with a strain-compensated superlattice barrier (SC-SLB) have better interface quality than those using AlGaN. This difference in quality may result from the alleviation of strain relaxation in superlattice layers to improve the crystalline perfection of the epitaxial structures. It was also found that the degree of the exciton localization effect rises considerably as InGaN grows directly on the AlGaN barrier layers. However, the increase in the strength of the polarization fields within the MQWs (as evaluated from bias-dependent photoluminescence (PL) measurement) could reduce the radiative efficiency of the LEDs and shift their PL peaks toward long wavelengths. With suitable control of crystalline quality and the reduced quantum-confined Stark effect in the MQWs, the SC-SLB LEDs operating at 150-mA-current show a 22.3% increase in light output power as compared to their conventional counterparts.     

Strong quantum confinement and high carrier concentration in AlGaN/InGaN/GaN heterostructure field-effect transistors

In this letter, we investigate the carrier features in AlGaN/InGaN/GaN heterostructure field-effect transistors. A study of charge control in the AlGaN/InGaN/GaN structure is performed by self-consistently solving Schrödingers equation in conjunction with Poissons equation. The results indicate that the concentration of two-dimensional electron gas can be largely increased with the incorporation of an InGaN layer. Both carrier density and quantum confinement are very sensitive to the strain in the InGaN channel layer. These novel features are attributed to the strong polarization effect in the AlGaN/InGaN and InGaN/GaN interfaces. PACS 85.30.De; 85.30.Tv; 77.65.Ly; 85.35.Be; 02.60.Cb     

Quantum confined carrier transition in a GaN/InGaN/GaN single quantum well bounded by AlGaN barriers

We investigated the carrier transition properties of the GaN/InGaN/GaN single quantum well bounded by AlGaN barriers. In order to confirm the carrier transition coming from the single quantum well, the single quantum well layer was etched by reactive ion etching method. The structural property of the samples was characterized by high resolution X-ray diffraction measurements. In micro-photoluminescence measurements, it is clearly shown that the donor bound exciton transition of the single quantum well sample was redshifted compared to the etched one due to strain. Moreover, a lot of peaks were observed below the GaN band gap energy due to carrier localization in the InGaN/GaN single quantum well, including carrier localization center and quantum confined states. The excitation power dependence and time resolved photoluminescence spectra were investigated to characterize the optical transition of the single quantum well.     

3D simulation of InGaN/GaN micro-ring light-emitting diodes

We employed the APSYS software to perform 3D electrical and ray-tracing simulations on micro-ring light-emitting diodes (LEDs) to verify previous experimental findings that they have higher extraction efficiency than micro-disk and broad area LEDs. 3D ray-tracing indicates the importance of inter-ring optical interactions. Furthermore we found that the higher light extraction efficiency is at the expense of reduced internal quantum efficiency (IQE) as injection current is increased.     

High power and high reliability GaN/InGaN flip-chip light-emitting diodes

High-power and high-reliability GaN/InGaN flip-chip light-emitting diodes (FCLEDs) have been demonstrated by employing a flip-chip design, and its fabrication process is developed. FCLED is composed of a LED die and a submount which is integrated with circuits to protect the LED from electrostatic discharge (ESD) damage. The LED die is flip-chip soldered to the submount, and light is extracted through the transparent sapphire substrate instead of an absorbing Ni/Au contact layer as in conventional GaN/InGaN LED epitaxial designs. The optical and electrical characteristics of the FCLED are presented. According to ESD IEC61000-4-2 standard (human body model), the FCLEDs tolerated at least 10\,kV ESD shock have ten times more capacity than conventional GaN/InGaN LEDs. It is shown that the light output from the FCLEDs at forward current 350mA with a forward voltage of 3.3\,V is 144.68\,mW, and 236.59\,mW at 1.0\,A of forward current. With employing an optimized contact scheme the FCLEDs can easily operate up to 1.0\,A without significant power degradation or failure. The life test of FCLEDs is performed at forward current of 200\,mA at room temperature. The degradation of the light output power is no more than 9\% after 1010.75\,h of life test, indicating the excellent reliability. FCLEDs can be used in practice where high power and high reliability are necessary, and allow designs with a reduced number of LEDs.     

Advantages of blue InGaN light-emitting diodes without an electron-blocking layer by using AlGaN step-like barriers

With the purpose to increase the uniformity of carrier distribution without sacrificing the enhancement of carrier injection efficiency, the light-emitting diodes (LEDs) without an electron-blocking layer (EBL) by using AlGaN step-like barriers (SLBs) is proposed and investigated numerically. The simulation results show that the enhanced electron confinement and hole injection efficiency are mainly attributed to the mitigated downward band bending induced by polarization field at the interface of the last barrier and EBL and the increased carrier distribution uniformity is due to step-like potential height for carrier of the new designed LEDs. In addition, the distribution of radiative recombination rate and the efficiency droop are markedly improved when the conventional GaN barriers are replaced by AlGaN SLBs and the EBL is removed.     

Simulation of InGaN/GaN light-emitting diodes with patterned sapphire substrate

Blue InGaN/GaN multiple quantum well (MQW) light-emitting diodes (LEDs) with patterned sapphire substrate (PSS) are simulated by the APSYS software. Approach of combining finite-difference time-domain (FDTD) method and raytracing technique is applied to perform light extraction. The simulation results show that PSS dramatically increases extraction efficiency of light power, in agreement with experiment. It is found that extraction efficiency can be maximized by changing the shape of PSS. This work presents a new approach to combine electrical simulation with FDTD and raytracing in 3D TCAD simulation of GaN-LED.     

Improvement of the carrier distribution with GaN/InGa N/AlGaN/InGaN/GaN composition-graded barrier for InGaN-based blue light-emitting diode

In Ga N light-emitting diodes(LEDs) with Ga N/In Ga N/Al Ga N/In Ga N/Ga N composition-graded barriers are proposed to replace the sixth and the middle five Ga N barriers under the condition of removing the electron blocking layer(EBL)and studied numerically in this paper. Simulation results show that the specially designed barrier in the sixth barrier is able to modulate the distributions of the holes and electrons in quantum well which is adjacent to the specially designed barrier. Concretely speaking, the new barrier could enhance both the electron and hole concentration remarkably in the previous well and reduce the hole concentration for the latter one to some extent along the growth direction. What is more,a phenomenon, i.e., a better carrier distribution in all the wells, just appears with the adoption of the new barriers in the middle five barriers, resulting in a much higher light output power and a lower efficiency droop than those in a conventional LED structure.     

The influence of AlGaN/GaN superlattices as electron blocking layers on the performance of blue InGaN light-emitting diodes

P-AlGaN/P-GaN superlattices are investigated in blue InGaN light-emitting diodes as electron blocking layers.The simulation results show that efficiency droop is markedly improved due to two reasons:(i) enhanced hole concentration and hole carrier transport efficiency in AlGaN/GaN superlattices,and(ii) enhanced blocking of electron overflow between multiple quantum-wells and AlGaN/GaN superlattices.     

Influence of polarization-matched AlGaInN barriers in blue InGaN light-emitting diodes

The advantages of blue InGaN light-emitting diodes with low bandgap energy and polarization-matched AlGaInN barriers are demonstrated numerically. Simulation results show that, besides the common benefit of enhanced electron-hole spatial overlap in the quantum well from the polarization-matched condition, the lower bandgap energy barriers can have additional advantages of more uniform carrier distribution among quantum wells while maintaining sufficient electron confinement. The internal quantum efficiencies of all the polarization-matched structures under study exhibit less severe efficiency droop, which is presumably attributed to the suppression of Auger recombination.     

Efficiency enhancement of InGaN based blue light emitting diodes with InGaN/GaN multilayer barriers

The advantages of InGaN based light-emitting diodes with InGaN/GaN multilayer barriers are studied.It is found that the structure with InGaN/GaN multilayer barriers shows improved light output power,lower current leakage,and less efficiency droop over its conventional InGaN/GaN counterparts.Based on the numerical simulation and analysis,these improvements on the electrical and the optical characteristics are mainly attributed to the alleviation of the electrostatic field in the quantum wells(QWs) when the InGaN/GaN multilayer barriers are used.     

Simulation of InGaN/GaN light-emitting diodes with a non-local quantum well transport model

Blue InGaN/GaN multiple quantum well (MQW) light-emitting diodes (LEDs) are simulated by the APSYS software with a non-local quantum well transport model which is used to describe the phenomenon that carriers can fly over the quantum wells directly. The simulation results based on this model are in good agreement with the experiment and show its significant influence on the output power, carrier transport, peak wavelength and current crowding effect of the InGaN/GaN MQW LEDs, indicating that the non-local quantum well transport plays an important role in these devices.     

InGaN/GaN多量子阱蓝色发光二极管的实验与模拟分析

分别采用量子阱模型和量子点模型对蓝色InGaN/GaN多量子阱发光二极管电学和光学特性进行模拟,并和实验测量结果进行了比对,结果发现,量子点模型的引入,很好地解决了I-V和电致发光二方面的实验与理论模型间符合程度不好的问题.同时,在I-V曲线特性模拟中发现,在量子点理论模型的基础上,只有考虑到载流子的非平衡量子传输效应,才能得到和实验相接近的I-V曲线,揭示着在InGaN/GaN 多量子阱发光二极管电输运特性中,载流子的非 关键词： InGaN/GaN 发光二极管 数值模拟 量子点模型     

A GaN AlGaN InGaN last quantum barrier in an InGaN/GaN multiple-quantum-well blue LED

The advantages of a GaN–AlGaN–InGaN last quantum barrier(LQB) in an InGaN-based blue light-emitting diode are analyzed via numerical simulation. We found an improved light output power, lower current leakage, higher recombination rate, and less efficiency droop compared with conventional GaN LQBs. These improvements in the electrical and optical characteristics are attributed mainly to the specially designed GaN–AlGaN–InGaN LQB, which enhances electron confinement and improves hole injection efficiency.     

Electrical Characteristics of InGaN/AlGaN and InGaN/GaN MQW Near UV-LEDs

Electrical characteristics of In0.05 Ga0.95N/Al0.07Ga0.9aN and In0.05 Ga0.95N/GaN multiple quantum well （MQW） ultraviolet light-emltting diodes （UV-LEDs） at 400hm wavelength are measured. It is found that for InGaN/AlGaN MQW LEDs, both ideality factor and parallel resistance are similar to those of InGaN/GaN MQW LEDs, while series resistance is two times larger. It is suggested that the Al0.07Ga0.93N barrier layer did not change crystal quality and electrical characteristic of p-n junction either, but brought larger series resistance. As a result, InGaN/AlGaN MQW LEDs suffer more serious thermal dissipation problem although they show higher light output efficiency.