A novel partial silicon on insulator high voltage LDMOS with low-k dielectric buried layer

A novel partial silicon-on-insulator (PSOI) high voltage device with a low-k (relative permittivity) dielectric buried layer (LK PSOI) and its breakdown mechanism are presented and investigated by MEDICI.At a low k value the electric field strength in the dielectric buried layer (E I) is enhanced and a Si window makes the substrate share the vertical drop,resulting in a high vertical breakdown voltage;in the lateral direction,a high electric field peak is introduced at the Si window,which modulates the electric field distribution in the SOI layer;consequently,a high breakdown voltage (BV) is obtained.The values of EI and BV of LK PSOI with kI=2 on a 2 μm thick SOI layer over 1 μm thick buried layer are enhanced by 74% and 19%,respectively,compared with those of the conventional PSOI.Furthermore,the Si window also alleviates the self-heating effect.     

A-188 V 7.2Ω·mm~2,P-channel high voltage device formed on an epitaxy-SIMOX substrate

This paper proposes a new n +-charge island (NCI) P-channel lateral double diffused metal-oxide semiconductor (LDMOS) based on silicon epitaxial separation by implantation oxygen (E-SIMOX) substrate.Higher concentration self-adapted holes resulting from a vertical electric field are located in the spacing of two neighbouring n +-regions on the interface of a buried oxide layer,and therefore the electric field of a dielectric buried layer (E I) is enhanced by these holes effectively,leading to an improved breakdown voltage (BV).The V B and E I of the NCI P-channel LDMOS increase to-188 V and 502.3 V/μm from 75 V and 82.2 V/μm of the conventional P-channel LDMOS with the same thicknesses SOI layer and the buried oxide layer,respectively.The influences of structure parameters on the proposed device characteristics are investigated by simulation.Moreover,compared with the conventional device,the proposed device exhibits low special on-resistance.     

Improvement on the breakdown voltage for silicon-on-insulator devices based on epitaxy-separation by implantation oxygen by a partial buried n+-layer

A novel silicon-on-insulator (SOI) high-voltage device based on epitaxy-separation by implantation oxygen (SIMOX) with a partial buried n⁺-layer silicon-on-insulator (PBN SOI) is proposed in this paper. Based on the proposed expressions of the vertical interface electric field, the high concentration interface charges which are accumulated on the interface between top silicon layer and buried oxide layer (BOX) effectively enhance the electric field of the BOX (E_I), resulting in a high breakdown voltage (BV) for the device. For the same thicknesses of top silicon layer (10 μm) and BOX (0.375 upmum), the E_I and BV of PBN SOI are improved by 186.5% and 45.4% in comparison with those of the conventional SOI, respectively.     

Novel high-voltage power lateral MOSFET with adaptive buried electrodes

A new high-voltage and low-specific on-resistance (R on,sp ) adaptive buried electrode (ABE) silicon-on-insulator (SOI) power lateral MOSFET and its analytical model of the electric fields are proposed. The MOSFET features are that the electrodes are in the buried oxide (BOX) layer, the negative drain voltage V d is divided into many partial voltages and the output to the electrodes is in the buried oxide layer and the potentials on the electrodes change linearly from the drain to the source. Because the interface silicon layer potentials are lower than the neighboring electrode potentials, the electronic potential wells are formed above the electrode regions, and the hole potential wells are formed in the spacing of two neighbouring electrode regions. The interface hole concentration is much higher than the electron concentration through designing the buried layer electrode potentials. Based on the interface charge enhanced dielectric layer field theory, the electric field strength in the buried layer is enhanced. The vertical electric field E I and the breakdown voltage (BV) of ABE SOI are 545 V/μm and -587 V in the 50 μm long drift region and the 1 μm thick dielectric layer, and a low R on,sp is obtained. Furthermore, the structure also alleviates the self-heating effect (SHE). The analytical model matches the simulation results.     

Novel high-voltage power device based on self-adaptive interface charge

This paper presents a novel high-voltage lateral double diffused metal--oxide semiconductor (LDMOS) with self-adaptive interface charge (SAC) layer and its physical model of the vertical interface electric field. The SAC can be self-adaptive to collect high concentration dynamic inversion holes, which effectively enhance the electric field of dielectric buried layer (E_I) and increase breakdown voltage (BV). The BV and E_I of SAC LDMOS increase to 612 V and 600 V/μm from 204 V and 90.7 V/μm of the conventional silicon-on-insulator, respectively. Moreover, enhancement factors of η which present the enhanced ability of interface charge on E_I are defined and analysed.     

A new structure and its analytical model for the vertical interface electric field of a partial-SOI high voltage device

A new partial-SOI (PSOI) high voltage device structure called a CI PSOI (charge island PSOI) is proposed for the first time in this paper. The device is characterized by a charge island layer on the interface of the top silicon layer and the dielectric buried layer in which a series of equidistant high concentration n⁺-regions is inserted. Inversion holes resulting from the vertical electric field are located in the spacing between two neighbouring n⁺-regions on the interface by the force with ionized donors in the undepleted n⁺-regions, and therefore effectively enhance the electric field of the dielectric buried layer (E_I) and increase the breakdown voltage (BV), thereby alleviating the self-heating effect (SHE) by the silicon window under the source. An analytical model of the vertical interface electric field for the CI PSOI is presented and the analytical results are in good agreement with the 2D simulation results. The BV and E_I of the CI PSOI LDMOS increase to 631~V and 584~V/μ m from 246~V and 85.8~V/μ m for the conventional PSOI with a lower SHE, respectively. The effects of the structure parameters on the device characteristics are analysed for the proposed device in detail.     

A novel partial SOI LDMOSFET with a trench and buried P layer for breakdown voltage improvement

In this paper for the first time, a partial silicon-on-insulator (PSOI) lateral double-diffused metal-oxide-semiconductor-field-effect-transistor (LDMOSFET) is proposed with a novel trench which improves breakdown voltage. The introduced trench in the partial buried oxide enhances peak of the electric field and is positioned in the drain side of the drift region to maximize breakdown voltage. We demonstrate that the electric field is modified by producing two additional electric field peaks, which decrease the common peaks near the drain and gate junctions in the trench-partial-silicon-on-insulator (T-PSOI) structure. Hence, a more uniform electric field is obtained. Two dimensional (2D) simulations show that the breakdown voltage of T-PSOI is nearly 64% higher in comparison with partial silicon on insulator (PSOI) structure and alleviate self heating effect approximately 9% and 15% in comparison with its conventional PSOI (C-PSOI) and conventional SOI (C-SOI) counterparts respectively. In addition the current of the T-PSOI, C-PSOI, conventional SOI (C-SOI), and fully depleted conventional SOI (FC-SOI) structures are 90, 82, 74, and 44 μA, respectively for a drain–source voltage V_DS = 30 V and gate–source voltage V_GS = 10 V.     

Ultra-low on-resistance high voltage (>600 V) SOI MOSFET with a reduced cell pitch

A low specific on-resistance (R S,on) silicon-on-insulator (SOI) trench MOSFET (metal-oxide-semiconductor-field-effect-transistor) with a reduced cell pitch is proposed.The lateral MOSFET features multiple trenches:two oxide trenches in the drift region and a trench gate extended to the buried oxide (BOX) (SOI MT MOSFET).Firstly,the oxide trenches increase the average electric field strength along the x direction due to lower permittivity of oxide compared with that of Si;secondly,the oxide trenches cause multiple-directional depletion,which improves the electric field distribution and enhances the reduced surface field (RESURF) effect in the SOI layer.Both of them result in a high breakdown voltage (BV).Thirdly,the oxide trenches cause the drift region to be folded in the vertical direction,leading to a shortened cell pitch and a reduced R S,on.Fourthly,the trench gate extended to the BOX further reduces R S,on,owing to the electron accumulation layer.The BV of the MT MOSFET increases from 309 V for a conventional SOI lateral double diffused metal-oxide semiconductor (LDMOS) to 632 V at the same half cell pitch of 21.5 μm,and R S,on decreases from 419 m · cm 2 to 36.6 m · cm 2.The proposed structure can also help to dramatically reduce the cell pitch at the same breakdown voltage.     

双面阶梯埋氧层部分SOI高压器件新结构

提出了双面阶梯埋氧层部分绝缘硅(silicon on insulator,SIO)高压器件新结构. 双面阶梯埋氧层的附加电场对表面电场的调制作用使表面电场达到近似理想的均匀分布, 耗尽层通过源极下硅窗口进一步向硅衬底扩展, 使埋氧层中纵向电场高达常规SOI结构的两倍, 且缓解了常规SOI结构的自热效应. 建立了漂移区电场的二维解析模型, 获得了器件结构参数间的优化关系. 结果表明, 在导通电阻相近的情况下, 双面阶梯埋氧层部分SOI结构击穿电压较常规SOI器件提高58％, 温度降低10—30K. 关键词： 双面阶梯 埋氧层 调制 自热效应     

Breakdown voltage model and structure realization of a thin silicon layer with linear variable doping on a silicon on insulator high voltage device with multiple step field plates

Based on the theoretical and experimental investigation of a thin silicon layer(TSL) with linear variable doping(LVD) and further research on the TSL LVD with a multiple step field plate(MSFP),a breakdown voltage(BV) model is proposed and experimentally verified in this paper.With the two-dimensional Poisson equation of the silicon on insulator(SOI) device,the lateral electric field in drift region of the thin silicon layer is assumed to be constant.For the SOI device with LVD in the thin silicon layer,the dependence of the BV on impurity concentration under the drain is investigated by an enhanced dielectric layer field(ENDIF),from which the reduced surface field(RESURF) condition is deduced.The drain in the centre of the device has a good self-isolation effect,but the problem of the high voltage interconnection(HVI) line will become serious.The two step field plates including the source field plate and gate field plate can be adopted to shield the HVI adverse effect on the device.Based on this model,the TSL LVD SOI n-channel lateral double-diffused MOSFET(nLDMOS) with MSFP is realized.The experimental breakdown voltage(BV) and specific on-resistance(R on,sp) of the TSL LVD SOI device are 694 V and 21.3 ·mm 2 with a drift region length of 60 μm,buried oxide layer of 3 μm,and silicon layer of 0.15 μm,respectively.     

Analysis of the breakdown mechanism for an ultra high voltage high-side thin layer silicon-on-insulator p-channel low-density metal-oxide semiconductor

This paper discusses the breakdown mechanism and proposes a new simulation and test method of breakdown voltage(BV) for an ultra-high-voltage(UHV) high-side thin layer silicon-on-insulator(SOI) p-channel lateral double-diffused metal-oxide semiconductor(LDMOS).Compared with the conventional simulation method,the new one is more accordant with the actual conditions of a device that can be used in the high voltage circuit.The BV of the SOI p-channel LDMOS can be properly represented and the effect of reduced bulk field can be revealed by employing the new simulation method.Simulation results show that the off-state(on-state) BV of the SOI p-channel LDMOS can reach 741(620) V in the 3-μm-thick buried oxide layer,50-μm-length drift region,and at 400 V back-gate voltage,enabling the device to be used in a 400 V UHV integrated circuit.     

Novel fast-switching LIGBT with P-buried layer and partial SOI

A novel silicon-on-insulator lateral insulated gate bipolar transistor(SOI LIGBT)is proposed in this paper.The proposed device has a P-type buried layer and a partial-SOI layer,which is called the BPSOI-LIGBT.Due to the electric field modulation effect generated by the P-type buried layer and the partial-SOI layer,the proposed structure generates two new peaks in the surface electric field distribution,which can achieve a smaller device size with a higher breakdown voltage.The smaller size of the device is beneficial to the fast switching.The simulation shows that under the same size,the breakdown voltage of the BPSOI LIGBT is 26%higher than that of the conventional partial-SOI LIGBT(PSOI LIGBT),and 84%higher than the traditional SOI LIGBT.When the forward voltage drop is 2.05 V,the turn-off time of the BPSOI LIGBT is 71%shorter than that of the traditional SOI LIGBT.Therefore,the proposed BPSOI LIGBT has a better forward voltage drop and turn-off time trade-off than the traditional SOI LIGBT.In addition,the BPSOI LIGBT effectively relieves the self-heating effect of the traditional SOI LIGBT.     

Improving breakdown voltage performance of SOI power device with folded drift region

A novel silicon-on-insulator(SOI) high breakdown voltage(BV) power device with interlaced dielectric trenches(IDT) and N/P pillars is proposed. In the studied structure, the drift region is folded by IDT embedded in the active layer,which results in an increase of length of ionization integral remarkably. The crowding phenomenon of electric field in the corner of IDT is relieved by the N/P pillars. Both traits improve two key factors of BV, the ionization integral length and electric field magnitude, and thus BV is significantly enhanced. The electric field in the dielectric layer is enhanced and a major portion of bias is borne by the oxide layer due to the accumulation of inverse charges(holes) at the corner of IDT.The average value of the lateral electric field of the proposed device reaches 60 V/μm with a 10 μm drift length, which increases by 200% in comparison to the conventional SOI LDMOS, resulting in a breakdown voltage of 607 V.     

Compound buried layer SOI high voltage device with a step buried oxide

A silicon-on-insulator (SOI) high performance lateral double-diffusion metal oxide semiconductor (LDMOS) on a compound buried layer (CBL) with a step buried oxide (SBO CBL SOI) is proposed.The step buried oxide locates holes in the top interface of the upper buried oxide (UBO) layer.Furthermore,holes with high density are collected in the interface between the polysilicon layer and the lower buried oxide (LBO) layer.Consequently,the electric fields in both the thin LBO and the thick UBO are enhanced by these holes,leading to an improved breakdown voltage.The breakdown voltage of the SBO CBL SOI LDMOS increases to 847 V from the 477 V of a conventional SOI with the same thicknesses of SOI layer and the buried oxide layer.Moreover,SBO CBL SOI can also reduce the self-heating effect.     

A new analytical model of high voltage silicon on insulator （SOI） thin film devices

A new analytical model of high voltage silicon on insulator (SOI) thin film devices is proposed, and a formula of silicon critical electric field is derived as a function of silicon film thickness by solving a 2D Poisson equation from an effective ionization rate, with a threshold energy taken into account for electron multiplying. Unlike a conventional silicon critical electric field that is constant and independent of silicon film thickness, the proposed silicon critical electric field increases sharply with silicon film thickness decreasing especially in the case of thin films, and can come to 141V/μm at a film thickness of 0.1μm which is much larger than the normal value of about 30V/μm. From the proposed formula of silicon critical electric field, the expressions of dielectric layer electric field and vertical breakdown voltage (V_B,V) are obtained. Based on the model, an ultra thin film can be used to enhance dielectric layer electric field and so increase vertical breakdown voltage for SOI devices because of its high silicon critical electric field, and with a dielectric layer thickness of 2μm the vertical breakdown voltages reach 852 and 300V for the silicon film thicknesses of 0.1 and 5μm, respectively. In addition, a relation between dielectric layer thickness and silicon film thickness is obtained, indicating a minimum vertical breakdown voltage that should be avoided when an SOI device is designed. 2D simulated results and some experimental results are in good agreement with analytical results.     

A high voltage silicon-on-insulator lateral insulated gate bipolar transistor with a reduced cell-pitch

A high voltage( 600 V) integrable silicon-on-insulator(SOI) trench-type lateral insulated gate bipolar transistor(LIGBT) with a reduced cell-pitch is proposed.The LIGBT features multiple trenches(MTs):two oxide trenches in the drift region and a trench gate extended to the buried oxide(BOX).Firstly,the oxide trenches enhance electric field strength because of the lower permittivity of oxide than that of Si.Secondly,oxide trenches bring in multi-directional depletion,leading to a reshaped electric field distribution and an enhanced reduced-surface electric-field(RESURF) effect.Both increase the breakdown voltage(BV).Thirdly,oxide trenches fold the drift region around the oxide trenches,leading to a reduced cell-pitch.Finally,the oxide trenches enhance the conductivity modulation,resulting in a high electron/hole concentration in the drift region as well as a low forward voltage drop(Von).The oxide trenches cause a low anode-cathode capacitance,which increases the switching speed and reduces the turn-off energy loss(Eoff).The MT SOI LIGBT exhibits a BV of 603 V at a small cell-pitch of 24 μm,a Von of 1.03 V at 100 A/cm-2,a turn-off time of 250 ns and Eoff of 4.1×10?3 mJ.The trench gate extended to BOX synchronously acts as dielectric isolation between high voltage LIGBT and low voltage circuits,simplifying the fabrication processes.     

A novel high-voltage light punch-through carrier stored trench bipolar transistor with buried p-layer

A novel high-voltage light punch-through(LPT) carrier stored trench bipolar transistor(CSTBT) with buried p-layer(BP) is proposed in this paper.Since the negative charges in the BP layer modulate the bulk electric field distribution,the electric field peaks both at the junction of the p base/n-type carrier stored(N-CS) layer and the corners of the trench gates are reduced,and new electric field peaks appear at the junction of the BP layer/N drift region.As a result,the overall electric field in the N drift region is enhanced and the proposed structure improves the breakdown voltage(BV) significantly compared with the LPT CSTBT.Furthermore,the proposed structure breaks the limitation of the doping concentration of the N-CS layer(NN CS) to the BV,and hence a higher NN CS can be used for the proposed LPT BP-CSTBT structure and a lower on-state voltage drop(Vce(sat)) can be obtained with almost constant BV.The results show that with a BP layer doping concentration of NBP = 7 × 1015 cm-3,a thickness of LBP = 2.5 μm,and a width of WBP = 5 μm,the BV of the proposed LPT BP-CSTBT increases from 1859 V to 1862 V,with NN CS increasing from 5 × 1015 cm-3 to 2.5 × 1016 cm-3.However,with the same N-drift region thickness of 150 μm and NN CS,the BV of the CSTBT decreases from 1598 V to 247 V.Meanwhile,the Vce(sat) of the proposed LPT BP-CSTBT structure decreases from 1.78 V to 1.45 V with NN CS increasing from 5 × 1015 cm-3 to 2.5 × 1016 cm-3.     

A low specific on-resistance SOI MOSFET with dual gates and recessed drain

A low specific on-resistance (R_on,sp) integrable silicon-on-insulator (SOI) metal-oxide semiconductor field-effect transistor (MOSFET) is proposed and investigated by simulation. The MOSFET features a recessed drain as well as dual gates which consist of a planar gate and a trench gate extended to the buried oxide layer (BOX) (DGRD MOSFET). First, the dual gates form dual conduction channels, and the extended trench gate also acts as a field plate to improve the electric field distribution. Second, the combination of the trench gate and the recessed drain widens the vertical conduction area and shortens the current path. Third, the P-type top layer not only enhances the drift doping concentration but also modulates the surface electric field distributions. All of these sharply reduce R_on,sp and maintain a high breakdown voltage (BV). The BV of 233 V and R_on,sp of 4.151 mΩ·cm² (V_GS=15 V) are obtained for the DGRD MOSFET with 15-μm half-cell pitch. Compared with the trench gate SOI MOSFET and the conventional MOSFET, R_on,sp of the DGRD MOSFET decreases by 36% and 33% with the same BV, respectively. The trench gate extended to the BOX synchronously acts as a dielectric isolation trench, simplifying the fabrication processes.     

The breakdown mechanism of a high-side pLDMOS based on a thin-layer silicon-on-insulator structure

A high-side thin-layer silicon-on-insulator (SOI) pLDMOS is proposed, adopting field implant (FI) and multiple field plate (MFP) technologies. The breakdown mechanisms of back gate (BG) turn-on, surface channel punch-through, and vertical and lateral avalanche breakdown are investigated by setting up analytical models, simulating related parameters and verifying experimentally. The device structure is optimized based on the above research. The shallow junction achieved through FI technology attenuates the BG effect, the optimized channel length eliminates the surface channel punch-through, the advised thickness of the buried oxide dispels the vertical avalanche breakdown, and the MFP technology avoids premature lateral avalanche breakdown by modulating the electric field distribution. Finally, for the first time, a 300 V high-side pLDMOS is experimentally realized on a 1.5 μ m thick thin-layer SOI.     

Non-depletion floating layer in SOI LDMOS for enhancing breakdown voltage and eliminating back-gate bias effect

A non-depletion floating layer silicon-on-insulator (NFL SOI) lateral double-diffused metal-oxide-semiconductor (LDMOS) is proposed and the NFL-assisted modulated field (NFLAMF) principle is investigated in this paper. Based on this principle, the floating layer can pin the potential for modulating bulk field. In particular, the accumulated high concentration of holes at the bottom of the NFL can efficiently shield the electric field of the SOI layer and enhance the dielectric field in the buried oxide layer (BOX). At variation of back-gate bias, the shielding charges of NFL can also eliminate back-gate effects. The simulated results indicate that the breakdown voltage (BV) is increased from 315 V to 558 V compared to the conventional reduced surface field (RESURF) SOI (CSOI) LDMOS, yielding a 77% improvement. Furthermore, due to the field shielding effect of the NFL, the device can maintain the same breakdown voltage of 558 V with a thinner BOX to resolve the thermal problem in an SOI device.