Doppler optomechanics of a photonic crystal

A laser beam directed at a mirror attached onto a flexible mount adds friction to its mechanical motion by the Doppler effect. For a normal mirror the efficiency of this radiative Doppler friction is very weak and practically masked by laser shot noise. We find that it can become very efficient using a photonic crystal mirror near its photonic band gaps. As an example, a Bragg mirror used at the long wavelength edge of its band stop can be efficiently optically cooled using the Doppler friction. The opposite effect opens new routes for optical pumping of mechanical systems: a laser pointing at a Bragg mirror and tuned at its short wavelength edge induces amplification of the vibrational excitation of the mirror leading eventually to its self-oscillation. These new effects rely on the strong dependency of a photonic crystal reflectivity on the wavelength.     

Photonic band structure calculations for metal-clad two-dimensional photonic crystal slab

We study the effect of metallic cladding on the band structure of a two-dimensional photonic crystal slab. Band structures of a honeycomb patterned two-dimensional photonic crystal slab, with/without a metal-clad or a perfect conductor clad, are calculated using both the finite-difference time-domain (FDTD) method and the plane wave expansion (PWE) method. We explain the changes of the band structure due to cladding. We also show that the band structure of a metal-clad photonic crystal can be obtained effectively from the odd modes of the air bridge type dielectric photonic crystal slab, thicker than the metal-clad photonic crystal by a factor larger than two.     

立体耦合光子晶体薄板微腔的高Q值特性研究

利用微腔之间的立体耦合,提出了基于无源材料硅的双层光子晶体薄板H1(DLPCS-H1)腔,薄板之间为空气层.使用三维时域有限差分方法和Padé近似方法分析了DLPCS-H1腔的偶极模的场分布和品质因子.通过对中间空气层高度的优化使DLPCS-H1腔的偶极模的品质因子得到了显著的提高,大约为单层光子晶体薄板H1腔的偶极模的品质因子的4倍.此外,还研究了三层光子晶体薄板H1腔,它的偶极模的品质因子约为单层光子晶体薄板H1腔的偶极模的品质因子的7倍.     

二维空气孔型光子晶体负折射平板透镜的减反层

提出并优化了由单排渐变介质波导构成的二维空气孔型光子晶体负折射平板透镜表面的减反层，改善了成像质量.二维时域有限差分模拟计算结果表明，采用减反层后，在入射角小于23°的范围内，在使得有效折射率n_eff=-1的工作频率处，光子晶体表面对从空气一侧入射的平面波的反射率可降低到1％以下. 关键词： 光子晶体 负折射 平板透镜 减反层     

Optomechanical coupling in a two-dimensional photonic crystal defect cavity

Periodically structured materials can sustain both optical and mechanical modes. Here we investigate and observe experimentally the optomechanical properties of a conventional two-dimensional suspended photonic crystal defect cavity with a mode volume of ~3(λ/n)3. Two families of mechanical modes are observed: flexural modes, associated to the motion of the whole suspended membrane, and localized modes with frequencies in the GHz regime corresponding to localized phonons in the optical defect cavity of diffraction-limited size. We demonstrate direct measurements of the optomechanical vacuum coupling rate using a frequency calibration technique. The highest measured values exceed 80 kHz, demonstrating high coupling of optical and mechanical modes in such structures.     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Negative refraction and reflection of Gaussian beam on two-dimensional photonic crystal slab

The refraction and reflection of Gaussian beam on two-dimensional photonic crystal (2DPC) slab are studied by the finite-difference time-domain (FDTD) method. It is shown that 2DPC slab enables negative refraction, which is demystified by the distribution of Poynting vector directions and values inside the 2DPC. A negative Goos-Hanchen shift is also found in the simulation.     

High quality factor in a two-dimensional photonic crystal cavity on silicon-on-insulator

We propose a design for high quality factor two-dimensional (2D) photonic crystal cavities on silicon-on-insulator (SOI). A quality factor of up to 1.2×10(7) with a modal volume of 2.35(λ/n)(3) is simulated. A very high quality factor of 200,000 is experimentally demonstrated for a 2D cavity fabricated on SOI.     

Single layer silicon photonic crystal slab

We present here the fabrication and characterization of single layer silicon photonic crystal mirror on a silicon-on-insulator wafer. By a combination of electron beam lithography, fast atom beam etching with deep reactive ion etching, silicon photonic crystal slabs are achieved on 260 nm freestanding silicon membrane and sandwiched with air on the top and bottom. Their high refractive index contrasts enable photonic crystal slabs function as dielectric mirrors for externally incident light. The optical performances of fabricated photonic crystal slabs can be tuned by varying the width of separation grooves or the air-hole size, which represents a significant advantage of offering various approaches for optical response control.     

Improved bends for two-dimensional photonic crystal waveguides

For two-dimensional photonic crystals involving infinitely long dielectric rods or air-holes on square or triangular lattices, a number of high performance 60° and 90° waveguide bends are obtained by solving optimization problems involving the radii of a few rods or air-holes as the degrees of freedom. In particular, the proposed 60° bends significantly outperform previous designs that insert three or five identical air-holes in the bend. The optimization problems are solved using a recently developed method based on the so-called Dirichlet-to-Neumann (DtN) maps of the unit cells.     

Silicon-based two-dimensional photonic crystal waveguides

A review of the properties of silicon-based two-dimensional (2D) photonic crystals is given, essentially infinite 2D photonic crystals made from macroporous silicon and photonic crystal slabs based on silicon-on-insulator basis. We discuss the bulk photonic crystal properties with particular attention to the light cone and its impact on the band structure. The application for wave guiding is discussed for both material systems, and compared to classical waveguides based on index-guiding. Losses of resonant waveguide modes above the light line are discussed in detail.     

The two-dimensional superconducting photonic crystal

The band structure of a two-dimensional superconducting photonic crystal is studied. The temperature dependence of the photonic band structure in a wide temperature region below the superconducting transition is analyzed. It is found that the photonic crystal has two full band gaps and two incomplete band gaps, which are shifted to the high frequency region with decreasing temperature.     

二维平板光子晶体直波导的制备和光传输特性的测量

利用聚焦离子束刻蚀的方法在SOI(silicon on insulator)基片上制备了W3型二维光子晶体直波导.观察并测量了近红外激光通过光子晶体波导的散射图形和透过谱.实验结果说明，激光在有引入引出脊形波导的光子晶体直波导中具有很好的传输特性. 关键词： 光子晶体波导 光子带隙 脊型波导     

Enhancement of spontaneous emission from the resonant modes of a photonic crystal slab single-defect cavity

Modification of the spontaneous-emission lifetime in photonic crystal single-defect resonant modes is studied with the finite-difference time domain method. We investigate spontaneous-emission enhancement from the monopole and the dipole modes of a hexagonal lattice cavity, considering the effects of the finite emitter linewidth and spectral detuning. Large spontaneous-emission enhancement of > 50 is achieved numerically from the high-quality-factor monopole mode when the emitter linewidth is comparable with the resonant-mode linewidth. However, if broad-linewidth material is used and a detuning effect is included, the dipole mode with a low quality factor and a smaller mode volume could be more advantageous for spontaneous-emission enhancement.     

二维介质柱光子晶体波导吸收边界条件

设计优化了用于截断二维正方格子介质柱光子晶体波导的分布布拉格反射波导的结构.二维时域有限差分数值模拟结果显示，在上述两种波导联接处的反射系数可以在大部分光子晶体波导导波的频谱范围内降到1％以下.将这种分布布拉格反射波导和通常的吸收边界条件相结合可以构成用于光子晶体波导的吸收边界条件，其反射率可以降低到-40dB以下，吸收层的厚度可取为晶格长度的1.3倍. 关键词： 吸收边界条件 光子晶体波导 时域有限差分     

Switchable nonlinear two-dimensional ferroelectric photonic crystal

A two-dimensional photonic crystal with a system of electrodes providing interaction of the incident and transmitted light waves has been developed on the basis of an epitaxial ferroelectric BaSrTiO₃ film. Investigation of the spectral characteristics has revealed the presence of a photonic band gap near 1.5 eV. A possibility of spatial frequency reconstruction of the second-harmonic wave generated by the photonic crystal is shown. The switching efficiency is as high as 6000%.     

Ultrahigh-quality photonic crystal cavity in GaAs

Membrane-based photonic crystal GaAs cavities with a double-heterostructure design were investigated. They show the highest quality factors for GaAs photonic crystal cavities to date, exhibiting quality factors higher than 10(5). The resonances of these cavities were fine-tuned in steps smaller than 2 nm by digital etching.     

Larger complete photonic bandgaps in two-dimensional photonic crystal heterostructure

A two-dimensional photonic crystal heterostructure with a large complete photonic bandgap is presented. It consists of two photonic crystals, whose dielectric configurations are reverse, with triangular lattice of circular columns. The structure retains the ease of fabrication while increasing the maximum quality factor of the gap 2–3 times after optimization. Photonic bandgap properties are calculated using a plane-wave method and the transmission spectra are obtained.     

A new anti-reflection surface structure for photonic crystal slab lens

An optimized surface modification structure for suppressing the reflections at the surfaces of photonic crystal slab lens is reported in this paper. The total reflection of the slab lens with proposed anti-reflection surface structure is reduced to below 0.3% for the incident angle of light less than 48 degrees. The image efficiency of the slab lens for the normal incident Gaussian beam with waist width equal to the wavelength is near 99%.