微多孔介质非牛顿流体格子Boltzmann模拟

根据修正Blake-Kozeny方程对Herschel-Bulkley模型的非牛顿流体在微多孔介质中流动的定量描述,通过增加外力项建立了非牛顿流体在宏观多孔介质中的格子Boltzmann模型,并将该模型应用到平板多孔介质中非牛顿流体的电渗驱动流模拟。对多孔介质渗透性参数和非牛顿流体流变性参数的影响进行模拟和分析,获得了各种参数对多孔介质中非牛顿流体流动速度的影响规律。     

多相非牛顿流体驱替过程的格子Boltzmann模拟

将非牛顿流体模型引入多相格子Boltzmann方法（LBM）,研究多相非牛顿流体的驱替过程.首先以牛顿流体驱替过程作对照,比较非牛顿流体的驱替特性.然后基于简单结构模型,分析不同界面张力下,非牛顿流体的驱替能力和驱替过程中被驱替相的形态变化规律,揭示界面张力的影响机理.结果表明：界面张力在驱替过程中起阻碍作用,其它参数相同情况下,界面张力越低,流体的驱替能力越强.最后,结合四参数随机生长（QSGS）结构生成方法,模拟不同压差、不同界面张力以及不同润湿性条件下多孔复杂结构内的非牛顿多相驱替过程,分析这些参数对过程的影响.     

室内可吸入颗粒物运动特性的格子 Boltzmann方法模拟

为探究室内可吸入颗粒物的运动特性,使用格子Boltzmann方法,在颗粒物运动概率模型的基础上考虑布朗力对颗粒物的作用,利用改良的LB-CA（Lattice Boltzmann-cellular automata）模型,模拟了Re数分别为400、1 000和2 000时粒径为0.01 μm、0.1 μm和1 μm的颗粒物在上送上回和上送侧回两种回风形式中的运动特性.结果显示：颗粒物的空间分布范围随着Re数的增大而增大,小粒径的颗粒物受到气流湍动和扩散作用的影响更明显;颗粒物的均方位移（mean square displacement,MSD）与Re数、颗粒物粒径的大小成反比,而同样的Re数下,颗粒物在上送侧回的回风形式中其MSD较大.总体上看上送侧回的回风形式具有较低的悬浮颗粒数和更高的室内空气品质.     

用格子Boltzmann方法模拟MKDV方程

用精确到0(ε)的5速格子Boltzmann模型模拟MKDV方程:u_t+6u²u_x+u_xxx=0,并与MKDV方程的孤子解比较,二者精确吻合. 关键词： 格子Boltzmann方法 MKDV方程 孤子解     

Sedimentation of a Single Charged Elliptic Cylinder in a Newtonian Fluid by Lattice Boltzmann Method

We simulate the sedimentation of single charged and single uncharged elliptic cylinders in a Newtonian fluid byusing the lattice Boltzmann method. Due to the polarizing effects and non-axial symmetry shape, there are theCoulomb force and corresponding torque exerted on the charged elliptic cylinder during the sedimentation, whichsignificantly change the horizontal translation and rotation of the cylinder. When the dielectric constant of theliquid is smaller than that of the wall, the direction of the Coulomb force is opposite to that of the hydrodynamicforce. Therefore there appears to be a critical linear charge density qc at which the elliptic cylinder will fallvertically off the centreline.     

润湿性梯度驱动液滴运动的格子Boltzmann模拟

运用考虑了固体与液体间分子作用力的格子Boltzmann方法,数值研究了由于固液界面上表面张力梯度引起的Marangoni效应驱动的液滴运动.当表面张力梯度较小时,计算结果和前人的理论预测符合较好.而表面张力梯度较大时,由于液滴不变形和准平衡态等假设不再满足,理论预测的液滴运动速度高于数值模拟的结果.计算结果显示,在向亲水端运动过程中液滴内部出现旋涡结构,当润湿性梯度较大时,其前进速度和接触角随时间变化出现振荡. 关键词： 润湿性 格子Boltzmann方法 Marangoni效应 液滴     

润湿性梯度驱动液滴运动的格子Boltzmann模拟

运用考虑了固体与液体间分子作用力的格子Boltzmann方法,数值研究了由于固液界面上表面张力梯度引起的Marangoni效应驱动的液滴运动.当表面张力梯度较小时,计算结果和前人的理论预测符合较好.而表面张力梯度较大时,由于液滴不变形和准平衡态等假设不再满足,理论预测的液滴运动速度高于数值模拟的结果.计算结果显示,在向亲水端运动过程中液滴内部出现旋涡结构,当润湿性梯度较大时,其前进速度和接触角随时间变化出现振荡.     

辐射传输的格子Boltzmann模拟

辐射动力学理论是描述辐射传输是重要手段,基于此,本文建立了辐射能和辐射动量守恒方程,并基于Chapman-Enskog多尺度展开方法实现了从辐射传输Boltzmann方程到宏观方程的推导,进而建立了适于一维辐射传输的2分量格子Boltzmann模型。数值结果与精确解吻合较好,表明本文提出的LBM方法具有很好的准确性和稳...     

热对流条件下颗粒沉降的格子Boltzmann方法模拟

采用格子Boltzmann方法模拟了在热对流条件下的颗粒沉降问题, 在研究单颗粒在等温流体、热流体和冷流体中运动的基础上, 进一步模拟了两个不同温度的颗粒在流体中的沉降.结果表明:两等温颗粒的沉降方式与雷诺数Re以及格拉晓夫数Gr密切相关, 而两不同温度的颗粒与两等温颗粒的沉降规律有显著不同.无论初始位置如何, 冷颗粒最终总位于热颗粒下方运动, Re较大时, 发生连续的拖曳、接触现象, 而Re较小时, 冷颗粒会以较大的沉降速度远离热颗粒. 关键词： 格子Boltzmann方法 颗粒沉降 热对流     

液滴撞击液膜过程的格子Boltzmann方法模拟

本文采用格子Boltzmann方法对液滴撞击液膜过程进行了研究, 主要考察了雷诺数(Re)、韦伯数(We)、相对液膜厚度 (h) 以及表面张力 (σ) 等物理参数对界面运动过程的影响. 首先, 随着Re数和We数的增加, 可以明显观察到液滴撞击液膜过程中形成的皇冠状水花以及卷吸现象; 当Re数较大时, 液体会发生飞溅, 由液体飞溅形成的小液滴则会继续下落, 并与液膜再次发生碰撞. 其次, 当相对液膜厚度较小时, 液滴撞击液膜并最终导致液膜断裂; 然而随着相对液膜厚度的增大, 尽管撞击过程溅起的液体会越来越多, 但是液膜并不会发生断裂. 再次, 随着表面张力的增大, 界面变形阻力增大, 撞击过程中产生的界面形变也逐渐减弱. 最后还发现皇冠(由液滴溅起形成)半径r 随时间满足r/(2R) ≈ α√Ut/(2R), 这一结果与已有结论是一致的.     

Lattice Boltzmann method for three-dimensional moving particles in a Newtonian fluid

A lattice Boltzmann method is developed to simulate three-dimensional solid particle motions in fluids. In the present model, a uniform grid is used and the exact spatial location of the physical boundary of the suspended particles is determined using an interpolation scheme. The numerical accuracy and efficiency of the proposed lattice Boltzmann method is demonstrated by simulating the sedimentation of a single sphere in a square cylinder. Highly accurate simulation results can be achieved with few meshes, compared with the previous lattice Boltzmann methods. The present method is expected to find applications on the flow systems with moving boundaries, such as the blood flow in distensible vessels, the particle－flow interaction and the solidification of alloys.     

Lattice Boltzmann Simulation of Sedimentation of a Single Elastic Dumbbell in a Newtonian Fluid

Based on the lattice Boltzmann method (LBM), the sedimentations of a single elastic dumbbell in a Newtonian fluid under different initial positions and orientations, and also that of the elastic dumbbells with different free lengths of the spring under the same initial conditions have been simulated. All of the numerical results show that the final orientations of the elastic dumbbells are in the same horizontal direction, and the final positions of their centroids are all on the centerline of the tube no matter what the initial positions and orientations of the elastic dumbbell or the free lengths of the spring are. When the elastic dumbbell finally falls down vertically, the two circular cylinders of the elastic dumbbell rotate around their own symmetry-axis respectively, and their angular velocities are equal but opposite to each other. For the sedimentations of the elastic dumbbells with different free lengths of the spring, the shorter of the free length is, the faster the final angular velocity and vertical velocity of the circular cylinder will be.     

Lattice Boltzmann Simulation of Sedimentation of a Single Elastic Dumbbell in a Newtonian Fluid

Based on the lattice Boltzmann method (LBM), the sedimentations of a single elastic dumbbell in a Newtonian fluid under different initial positions and orientations, and also that of the elastic dumbbells with different free lengths of the spring under the same initial conditions have been simulated. All of the numerical results show that the final orientations of the elastic dumbbells are in the same horizontal direction, and the final positions of their centroids are all on the centerline of the tube no matter what the initial positions and orientations of the elastic dumbbell or the free lengths of the spring are. When the elastic dumbbell finally falls down vertically, the two circular cylinders of the elastic dumbbell rotate around their own symmetry-axis respectively, and their angular velocities are equal but opposite to each other. For the sedimentations of the elastic dumbbells with different free lengths of the spring, the shorter of the free length is, the faster the final angular velocity and vertical velocity of the circular cylinder will be.     

Lattice Boltzmann simulations of a dumbbell moving in a Poiseuille flow

In this paper, the lattice Boltzmann method is applied to simulate a dumbbell moving in a pressure-driven flow in a planar channel with the stress-integration method for the evaluation of hydrodynamic force acting on the cylinders. The simulation results show that the dumbbell also has the important feature of the Segr\'e--Silberberg effect like a particle in a Poiseuille flow. The dumbbell trajectories, orientations, the cylinders vertical velocities and angular velocities all reach their equilibrium values separately independent of their initial positions. It is also found that the dumbbell equilibrium positions depend on the flow Reynolds number, blockage ratio and elastic coefficient. This study is expected to be helpful to understand the dynamics of polymer solutions, polymer synthesis and reaction, etc.     

Lattice Boltzmann simulation of transverse wave travelling in Maxwell viscoelastic fluid

A nine-velocity lattice Boltzmann method for Maxwell viscoelastic fluid is proposed. Travelling of transverse wavein Maxwell viscoelastic fluid is simulated. The instantaneous oscillating velocity, transverse shear speed and decay rateagree with theoretical results very well.     

用晶格玻尔兹曼方法研究颗粒在涡流中的运动

用晶格玻尔兹曼方法研究小颗粒在涡流中的运动.涡流由流经空腔的流体产生.用动量交换法和压力张量积分法计算颗粒在涡流中的运动轨迹、速度和角速度.最后用张量积分法计算两个不同半径的颗粒在涡流中的运动. 关键词： 晶格玻尔兹曼方法 涡流 颗粒     

Lattice Boltzmann Solid Particles in a Lattice Boltzmann Fluid

We define a lattice Boltzmann model of solid, deformable suspensions immersed in a fluid itself described in terms of the lattice Boltzmann method. We discuss the rules governing the internal dynamics of the solid object as well as the rules specifying the interaction between solid and fluid particle. We perform a numerical drag experiment to validate the model. Finally we consider the case of a population of flexible chains in suspension in a shear stress flow and study the influence on the velocity profile.     

Lattice Boltzmann simulation of fluid flows in two-dimensional channel with complex geometries

Boundary conditions (BCs) play an essential role in lattice Boltzmann (LB) simulations. This paper investigates several most commonly applied BCs by evaluating the relative L₂-norm errors of the LB simulations for two-dimensional (2-D) Poiseuille flow. It is found that the relative L₂-norm error resulting from FHML's BC is smaller than that from other BCs as a whole. Then, based on the FHML's BC, it formulates an LB model for simulating fluid flows in 2-D channel with complex geometries. Afterwards, the flows between two inclined plates, in a pulmonary blood vessel and in a blood vessel with local expansion region, are simulated. The numerical results are in good agreement with the analytical predictions and clearly show that the model is effective. It is expected that the model can be extended to simulate some real biologic flows, such as blood flows in arteries, vessels with stenosises, aneurysms and bifurcations, etc.     

振动纤维捕集颗粒的格子Boltzmann模拟

采用格子Boltzmann方法对振动纤维捕集颗粒进行数值研究.纤维附近采用多块网格加细技术计算,颗粒采用Lagrange跟踪方法模拟.研究雷诺数为200的流向振动纤维绕流的AⅡ、AⅢ、AIV、S四种涡结构下的亚微米煤粉颗粒的捕集问题.结果表明纤维的流向强迫振动能够显著提高颗粒的捕集效率.且迎风面的捕集效率提升不大,背风面的提升则更为显著.颗粒撞击角度的统计反映了背风面捕集效率提升的细节.另外流动处于AⅢ模态时,每个周期内脱落两个正涡一个负涡,被捕集颗粒的初始位置分布不对称.而其它模态基本关于流场中心对称.     

Lattice Boltzmann simulations of flow past a cylindrical obstacle

We present lattice Boltzmann simulations of flow past a cylindrical obstacle. Our study is based on the Lévy walk model of turbulence in a lattice Boltzmann model. We discuss pressure around the cylinder with laminar and turbulent incident flows, as well as the dependence of the von Karman street on the analog of integral scale in our model.