A New Wavelength Selective Photoreceiver

A new kind of wavelength selective photoreceiver is proposed. It was constructed by a Fabry-Perot (F-P) etalon filter and a resonant cavity enhanced (RCE) photodetector. The photoreceiver′s spectral response is determined by the F-P etalon filter with a FWHM of less than 4 nm. Moreover, with such a photoreceiver, the transmission loss of the F-P etalon filter can be compensated to some extent. And this will benefit its applications.     

WDM波长路由光网络的波长分配算法

由于WDM网络中的传输和交换是以波长为粒度进行的。因此波长分配算法就成为光网络的研究热点。有效的算法可大大提高波长的利用率，并可充分挖掘WDM的带宽资源。介绍了WDM全光网络中静态和动态波长分配算法，尤其是结合大型网孔网络详述了几种动态波长分配算法。针对波长变换器在全光网络中的应用。提出了一种可以解决任意类型光网络的分层图算法，它可以一次性解决路由选择和波长分配问题，大大提高了该算法的效率。是未来光网络中非常有前景的一种波长分配算法。     

利用光注入分布布拉格反射激光二极管实现2.5Gbit／s的波长变换

给出利用光注入分布布拉格反射激光二极管实现２．５Ｇｂｉｔ／ｓ的波长变换的实验结果。本结果实用于超高速光通信。     

应用光纤光栅的马赫—陈德尔型波分复用器特性的理论分析

利用光振幅传输矩阵对光纤光栅马赫－－陈德尔型波分复用器的特尾进行了理论研究，分析了结构参数对器件性能的影响，给出了其最佳的结构参数。     

一种实现负荷均衡的动态波长分配新算法

提出了一种新的动态波长分配算法:负荷均衡法.新算法将负荷均分到各个波长上,使各段链路上预留的波长资源最大化;同时,更加准确地考虑了分配波长对于整个网络的影响,将分配波长对整个网络的影响降低到最低程度.仿真结果表明:新的算法能更好地提高网络的性能.     

实现2.5 Gbit/s的波长变换

给出利用光注入分布布拉格反射激光二极管实现２．５Ｇｂｉｔ／ｓ的波长变换的实验结果。本结果实用于超高速光通信。     

Combined Path and Maximum Empty Static Routing Algorithms with Wavelength Assignment for Future Transport Networks

Abstract

In this article, two static routing algorithms have been proposed and compared to some of the existing algorithms on the basis of blocking probability. The two proposed static routing and wavelength assignment algorithms reduce the blocking probability to maximize the utilization of the network. All of these algorithms are analyzed and compared with four wavelength assignment schemes, which are first-fit, random, most used, and least used. It is shown that our proposed static algorithms give the best performance for first-fit wavelength assignment and most used wavelength assignment strategies with reduced complexity. For least used wavelength assignment and random wavelength assignment, 1 fixed and 2 alternate routing algorithm gives the lowest blocking probability.     

Wavelength Conversion in WDM All-Optical Networks and Analytical Models

This paper gives a brief introduction to the various wavelength conversion techniques. In order to explain the applications and benefits of the wavelength conversion techniques in WDM all-optical networks, several analytical models are studied.     

Wavelength Filter and Converter by NDFWM in Strained Quantum Wells

A novel kind of wavelength filter and converter using nondegenerate four-wave mixing (NDFWM) in an optical amplifier with tensile and compressively strained quantum wells (T/C SQW) is reported in this paper. The configuration of the T/C SQW converting filter is designed first, followed by the establishment of the coupling model of the device. The influences of the property parameters of the optical amplifier with T/C SQW on the output efficiency, 3dB bandwidth, and the frequency shift are mainly discussed. The device can serve as both filter and wavelength converter with high conversion efficiency and narrow bandwidth on the order of 0.01 nm. Meanwhile, the frequency conversion range, which is decided by the gain bandwidth of the semiconductor media, is up to 5000 Ghz in the considered case.     

A New 1×K Tunable Multi-wavelength Router and its Features

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗａｖｅｌｅｎｇｔｈｒｏｕｔｅｒｓ (ＷＲｓ)ａｒｅｋｅｙｄｅｖｉｃｅｓｉｎｗａｖｅｌｅｎｇｔｈ ｒｏｕｔｉｎｇａｌｌ ｏｐｔｉｃａｌｎｅｔｗｏｒｋｓ.Ｒｅｃｅｎｔｌｙ ,ｒｅｓｅａｒｃｈｆｏｒｔｈｅＷＲｓｈａｓｂｅｅｎｏｎｅｏｆｈｏｔｓｐｏｔｓｉｎｗａｖｅｌｅｎｇｔｈｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ (ＷＤＭ )ｎｅｔｗｏｒｋｔｅｃｈｎｏｌｏｇｉｅｓ[1,2 ] .Ｂｙｄｉｆｆｅｒｅｎｔｒｏｕｔｉｎｇｐａｔｔｅｒｎｓ,ｔｈｅＷＲｓｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏｔｗｏｋｉｎｄ…     

A New 1×K Tunable Multi-wavelength Router and its Features

Tunable wavelength routers (TWRs) for multiple wavelength selection are key devices in dynamic wavelength-routing wavelength division multiplexing (WDM) networks. In this paper, by cascading conventional 2×2 TWRs, a new 1×K TWR is proposed for large-scale dynamic wavelength-routing WDM networks. When the cascading numbers are smaller, the 1×K TWR can be directly applied to networking WDM networks. When the cascading numbers are larger, the 1×K TWR can be carried out by the integrating method and be extensively used to networking various multi-wavelength optical networks by the way of “EDFA+TWR”. Though the cascading method proposed is based on the acousto-optic TWRs, it can be also applied to cascading other kinds of TWRs.     

Comparison of integrated multi-wavelength and (widely) tunable edge-emitting laser diodes

We present a thorough comparison of the characteristics of both tunable and multi-wavelength edge-emitting laser diodes. Both devices are currently seen as the most promising transmitters for future wavelength division multiplexing systems and networks. In our comparison, considerable attention is therefore paid to characteristics such as channel spacing and maximum number of channels and to frequency accuracy. Cost, stability and ease of use are other aspects which have been given attention, although they are not easily quantified. Because of their compactness and robustness, we only consider integrated devices.     

光纤光栅传感器的波长检测系统及其理论分析

理论分析并实验研究了基于光纤光栅滤波调谐技术的光纤光栅传感系统。分析了由于光源光强度波动及光纤扰动而引起的波长测量误差，并给出了减小测量误差的方法。该系统采用应变仪作为读出设备，使测量结果的线性拟合度达0．9995，测量光纤光栅布拉格波长移动的最小分辨率为1．3pm。     

单轴应力对量子阱红外探测器吸收波长的影响

以单轴应力作用下超晶格量子阱应变能带理论为基础,采用电子反射与干涉方法,研究了单轴应力对超晶格能带的影响,推导了单轴应力与超晶格导带子能级的定量关系。以GaAs-AlGaAs-GaAs为例,具体计算了导带中子能级对应力的依赖关系,进而给出了单轴应力对n型AlGaAs-GaAs量子阱红外探测器(QWIP)吸收波长的影响。计算结果表明,随着单轴压应力的增大,量子阱红外探测器的吸收波长表现出较明显的变化。当单轴压力增大到1.3GPa,量子阱红外探测器的吸收峰值移动了将近1.1μm,并且基本与应力呈线性关系。量子阱红外探测器吸收波长连续可调范围5.57～4.46μm。     

波分复用薄膜带通滤光片的中心波长温度稳定性

讨论了影响波分复用薄膜滤光片中心波长漂移的因素 ,着重分析了滤光片的温度稳定性。根据实验结果 ,借助于高桥模型 ,分析计算了滤光片的折射率温度系数、线膨胀系数和泊松比以及它们对温度漂移的影响。得到了Ta2 O5/SiO2 滤光片薄膜的折射率温度系数、线膨胀系数、泊松比分别为 1× 10 -5℃-1,5× 10 -7℃-1和 0 12 ,指出了这三个参量是影响温度稳定性最重要的因素 ,特别是薄膜的折射率温度系数。对特定的基板热膨胀系数 ,通过调节滤光片的干涉级次和间隔层材料 ,可望得到零温度漂移的稳定滤光片。     

空-地激光通信链路波长选择因素分析

空-地激光通信链路波长选择主要和通信传输所使用的大气随机信道、光束跟踪、捕获、瞄准(Acquisition,Pointing and Tracking-APT)子系统,通信子系统及接收、发射系统采用的主要光电器件等因素有关.本文对影响空-地激光通信链路波长选择的因素进行了分析,并根据上述影响因素开展了对通信波长的研究,促进了空-地激光通信系统的总体设计工作.     

X射线激光器——新兴的短波长相干光源

Ｘ射线激光器是运行在电磁辐射波谱中Ｘ射线波段的短波长相干光源，通常，Ｘ射线激光器都采用高功率激光器作为泵浦源，强激光与靶相互使用形成的高温等离子体作为工作介质，并采用单程（或双程）行波放大的运行方式，近１０年来，Ｘ射线激光器的研制工作取得了重大进展，并开始了Ｘ射线激光应用的初步研究，现在正朝着提供高亮度，有较好相干性并且价格便宜的小型短波长Ｘ光光源的目标努力。     

WDM全光网络中一种分布式路由及波长分配协议

在全光网络中,光信号在全光域内传输,避免了光-电转换带来的延迟,因此全光网支持高数据率传输并提供巨大的网络容量。WDM(波分多路复用)技术的采用使得高速光传输线路与低速终端处理设备之间能够相互兼容。探讨了WDM全光网中的路由及波长分配问题,提出了一种用于WDM网络中的分布式路由及波长分配协议,具有开销小、阻塞率低以及良好的可扩展性,是一种比较实用的RWA协议。     

多光谱目标探测的波段选择

利用超光谱数据对多光谱传感器的波段选择提出了一个框架。根据探测理论,导出了一个代价函数,对于区分弱小目标和杂波(光谱分布已知)的探测性能最优的光谱波段来说,可使该函数最小。利用匹配追踪算法找到了一个近似最小的代价函数,从而选出了滤波器。该方法可用于设计多光谱红外搜索跟踪和光电导弹预警传感器。在杂波背景下,对小目标探测的低虚警率和高探测概率来说是至关重要的。     

MoS_2溶液的波长选择性光限幅效应研究

采用N,N-二甲基甲酰胺(DMF)和四氢呋喃(THF)为溶剂,用离散法制备二硫化钼(MoS2)悬浮溶液,并用开孔Z扫描方法研究其在可见和近红外区域的非线性光学特性.结果显示,在强激光照射下,MoS2(in THF)悬浮溶液在可见波段(530 nm)透过率增强为常光透过率的1.54倍,表现为饱和吸收;在近红外波段(790 nm)透过率减弱为常光透过率的0.6倍,表现为反饱和吸收,具有很好的波长选择性光限幅效应.而作为对比的MoS2(in DMF)悬浮溶液在全波段透过率降低,呈现反饱和吸收特性,波长选择性不明显.机理解释可能为饱和吸收和热效应导致的自衍射两种机制联合作用.