椭圆柱体在牛顿流体中运动的格子Boltzmann方法模拟

用格子Boltzmann方法建立了椭圆柱体的二维动力学模型，利用所建立的模型，数值模拟了 牛顿流体中不同形状的椭圆柱体在相同初始条件下的运动和同一椭圆柱体在不同初始条件下 的运动，并通过比较相同条件下圆柱体的运动，讨论了椭圆柱体二维运动的特征，得到了一 些有意义的结果. 关键词： 格子Boltzmann方法 椭圆柱体 牛顿流体     

Lattice Boltzmann Simulation of Sedimentation of a Single Elastic Dumbbell in a Newtonian Fluid

Based on the lattice Boltzmann method (LBM), the sedimentations of a single elastic dumbbell in a Newtonian fluid under different initial positions and orientations, and also that of the elastic dumbbells with different free lengths of the spring under the same initial conditions have been simulated. All of the numerical results show that the final orientations of the elastic dumbbells are in the same horizontal direction, and the final positions of their centroids are all on the centerline of the tube no matter what the initial positions and orientations of the elastic dumbbell or the free lengths of the spring are. When the elastic dumbbell finally falls down vertically, the two circular cylinders of the elastic dumbbell rotate around their own symmetry-axis respectively, and their angular velocities are equal but opposite to each other. For the sedimentations of the elastic dumbbells with different free lengths of the spring, the shorter of the free length is, the faster the final angular velocity and vertical velocity of the circular cylinder will be.     

Lattice Boltzmann Simulation of Sedimentation of a Single Elastic Dumbbell in a Newtonian Fluid

Based on the lattice Boltzmann method (LBM), the sedimentations of a single elastic dumbbell in a Newtonian fluid under different initial positions and orientations, and also that of the elastic dumbbells with different free lengths of the spring under the same initial conditions have been simulated. All of the numerical results show that the final orientations of the elastic dumbbells are in the same horizontal direction, and the final positions of their centroids are all on the centerline of the tube no matter what the initial positions and orientations of the elastic dumbbell or the free lengths of the spring are. When the elastic dumbbell finally falls down vertically, the two circular cylinders of the elastic dumbbell rotate around their own symmetry-axis respectively, and their angular velocities are equal but opposite to each other. For the sedimentations of the elastic dumbbells with different free lengths of the spring, the shorter of the free length is, the faster the final angular velocity and vertical velocity of the circular cylinder will be.     

用晶格玻尔兹曼方法研究颗粒在涡流中的运动

用晶格玻尔兹曼方法研究小颗粒在涡流中的运动.涡流由流经空腔的流体产生.用动量交换法和压力张量积分法计算颗粒在涡流中的运动轨迹、速度和角速度.最后用张量积分法计算两个不同半径的颗粒在涡流中的运动. 关键词： 晶格玻尔兹曼方法 涡流 颗粒     

Lattice Boltzmann Solid Particles in a Lattice Boltzmann Fluid

We define a lattice Boltzmann model of solid, deformable suspensions immersed in a fluid itself described in terms of the lattice Boltzmann method. We discuss the rules governing the internal dynamics of the solid object as well as the rules specifying the interaction between solid and fluid particle. We perform a numerical drag experiment to validate the model. Finally we consider the case of a population of flexible chains in suspension in a shear stress flow and study the influence on the velocity profile.     

Lattice Boltzmann simulation of transverse wave travelling in Maxwell viscoelastic fluid

A nine-velocity lattice Boltzmann method for Maxwell viscoelastic fluid is proposed. Travelling of transverse wavein Maxwell viscoelastic fluid is simulated. The instantaneous oscillating velocity, transverse shear speed and decay rateagree with theoretical results very well.     

Lattice Boltzmann simulations of a dumbbell moving in a Poiseuille flow

In this paper, the lattice Boltzmann method is applied to simulate a dumbbell moving in a pressure-driven flow in a planar channel with the stress-integration method for the evaluation of hydrodynamic force acting on the cylinders. The simulation results show that the dumbbell also has the important feature of the Segr\'e--Silberberg effect like a particle in a Poiseuille flow. The dumbbell trajectories, orientations, the cylinders vertical velocities and angular velocities all reach their equilibrium values separately independent of their initial positions. It is also found that the dumbbell equilibrium positions depend on the flow Reynolds number, blockage ratio and elastic coefficient. This study is expected to be helpful to understand the dynamics of polymer solutions, polymer synthesis and reaction, etc.     

Lattice Boltzmann simulation of behaviour of particles moving in blood vessels under the rolling massage

The rolling massage is one of the most important manipulations in Chinese massage, which is expected to eliminate many diseases. Here, the effect of the rolling massage on a pair of particles moving in blood vessels under rolling massage manipulation is studied by the lattice Boltzmann simulation. The simulated results show that the motion of each particle is considerably modified by the rolling massage, and it depends on the relative rolling velocity, the rolling depth, and the distance between particle position and rolling position. Both particles' translational average velocities increase almost linearly as the rolling velocity increases, and obey the same law. The increment of the average relative angular velocity for the leading particle is smaller than that of the trailing one. The result is helpful for understanding the mechanism of the massage and to further develop the rolling techniques.     

Lattice Boltzmann simulation of fluid flows in two-dimensional channel with complex geometries

Boundary conditions (BCs) play an essential role in lattice Boltzmann (LB) simulations. This paper investigates several most commonly applied BCs by evaluating the relative L₂-norm errors of the LB simulations for two-dimensional (2-D) Poiseuille flow. It is found that the relative L₂-norm error resulting from FHML's BC is smaller than that from other BCs as a whole. Then, based on the FHML's BC, it formulates an LB model for simulating fluid flows in 2-D channel with complex geometries. Afterwards, the flows between two inclined plates, in a pulmonary blood vessel and in a blood vessel with local expansion region, are simulated. The numerical results are in good agreement with the analytical predictions and clearly show that the model is effective. It is expected that the model can be extended to simulate some real biologic flows, such as blood flows in arteries, vessels with stenosises, aneurysms and bifurcations, etc.     

Lattice Boltzmann simulation of solid particles suspended in fluid

The lattice Boltzmann method, an alternative approach to solving a fluid flow system, is used to analyze the dynamics of particles suspended in fluid. The interaction rule between the fluid and the suspended particles is developed for real suspensions where the particle boundaries are treated as no-slip impermeable surfaces. This method correctly and accurately determines the dynamics of single particles and multi-particles suspended in the fluid. With this method, computational time scales linearly with the number of suspensions,N, a significant advantage over other computational techniques which solve the continuum mechanics equations, where the computational time scales asN ³. Also, this method solves the full momentum equations, including the inertia terms, and therefore is not limited to low particle Reynolds number.     

耦合界面张力的三维流体界面不稳定性的格子Boltzmann模拟

采用介观格子Boltzmann方法模拟界面张力作用下三维流体界面的Rayleigh-Taylor (RT)不稳定性的增长过程,主要分析表面张力对流体界面动力学行为及尖钉和气泡后期增长的影响机制.首先发现三维RT不稳定性的发生存在临界表面张力(σ_c),其值随着流体Atwood数的增大而增大,且数值预测值与理论分析结果σ_c=(ρ_h-ρ₁)g/k~2一致.另外,随着表面张力的增大,不稳定性演化过程中界面卷吸程度和结构复杂性逐渐减弱,系统中界面破裂形成离散液滴的数目也显著减少.相界面的后期动力学行为也从非对称发展转向始终保持关于中轴线对称.尖钉与气泡振幅在表面张力较小时对其变化不显著,当表面张力增大到一定值后,可以有效地抑制尖钉与气泡振幅的增长.进一步发现,高雷诺数三维RT不稳定性在不同表面张力下均经历4个不同的发展阶段:线性阶段、饱和速度阶段、重加速和混沌混合阶段.尖钉与气泡在饱和速度阶段以近似恒定的速度增长,其渐进速度的值与修正的势流理论模型结果一致.受非线性Kelvin-Helmholtz旋涡的剪切作...     

用晶格玻尔兹曼方法研究螺旋波的产生机制和演化行为

采用五速正方晶格玻尔兹曼模型，由晶格玻尔兹曼方程推导得到了反应扩散方程.分析了Selkov反应扩散系统螺旋波的形成机制.零流边界条件下计算机数值模拟螺旋波的形成和破碎过程，发现Selkov反应扩散系统的失稳属于Doppler失稳.改变参数模拟系统的演化行为，发现不同的参数下系统可能到达三种不同的状态：均匀定态、混沌状态和螺旋波. 关键词： 晶格玻尔兹曼方法 螺旋波 计算机模拟     

热对流条件下颗粒沉降的格子Boltzmann方法模拟

采用格子Boltzmann方法模拟了在热对流条件下的颗粒沉降问题, 在研究单颗粒在等温流体、热流体和冷流体中运动的基础上, 进一步模拟了两个不同温度的颗粒在流体中的沉降.结果表明:两等温颗粒的沉降方式与雷诺数Re以及格拉晓夫数Gr密切相关, 而两不同温度的颗粒与两等温颗粒的沉降规律有显著不同.无论初始位置如何, 冷颗粒最终总位于热颗粒下方运动, Re较大时, 发生连续的拖曳、接触现象, 而Re较小时, 冷颗粒会以较大的沉降速度远离热颗粒. 关键词： 格子Boltzmann方法 颗粒沉降 热对流     

格子玻尔兹曼方法模拟弯流道中粒子的惯性迁移行为

本文发展了一个能够模拟微流场环境下粒子惯性迁移行为的三维耦合模型.该模型采用基于动理论的格子玻尔兹曼方法(LBM)描述流体流动,采用牛顿动力学模型描述粒子的平动和转动,采用基于LBM反弹格式的运动边界法实现流体与粒子模型的耦合.模拟了重力作用下粒子的沉降过程和Couette流条件下粒子的转动过程,通过将模拟结果与文献中的基准解进行对比定量验证了模型的可靠性.模拟了不同大小的球形粒子在环形流道中的迁移,成功复现了经典的流道截面二次流形成过程,分析了粒径大小对粒子在流道中平衡位置的影响机理.结果表明,粒子在弯流道中的平衡位置与粒径大小密切相关,小半径粒子的平衡位置靠近流道外侧而大半径粒子则靠近流道内侧.通过实验对模拟结果进行了定性验证.本模型为深入研究微流场环境下粒子的运动特性以及开发微流控粒子分选器件提供了参考依据.     

Lattice Boltzmann method with the cell-population equilibrium

The central problem of the lattice Boltzmann method (LBM) is to construct a discrete equilibrium. In this paper, a multi-speed 1D cell-model of Boltzmann equation is proposed, in which the cell-population equilibrium, a direct non-negative approximation to the continuous Maxwellian distribution, plays an important part. By applying the explicit one-order Chapman--Enskog distribution, the model reduces the transportation and collision, two basic evolution steps in LBM, to the transportation of the non-equilibrium distribution. Furthermore, 1D dam-break problem is performed and the numerical results agree well with the analytic solutions.     

Lattice Boltzmann method with the cell-population equilibrium

The central problem of the lattice Boltzmann method （LBM） is to construct a discrete equilibrium. In this paper, a multi-speed 1D cell-model of Boltzmann equation is proposed, in which the cell-population equilibrium, a direct non- negative approximation to the continuous Maxwellian distribution, plays an important part. By applying the explicit one-order Chapman-Enskog distribution, the model reduces the transportation and collision, two basic evolution steps in LBM, to the transportation of the non-equilibrium distribution. Furthermore, 1D dam-break problem is performed and the numerical results agree well with the analytic solutions.     

Extended Lattice Boltzmann Model

Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for small flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and the isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model also remains valid for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow.     

Lattice Boltzmann computational fluid dynamics in three dimensions

The recent development of the lattice gas method and its extension to the lattice Boltzmann method have provided new computational schemes for fluid dynamics. Both methods are fully paralleled and can easily model many different physical problems, including flows with complicated boundary conditions. In this paper, basic principles of a lattice Boltzmann computational method are described and applied to several three-dimensional benchmark problems. In most previous lattice gas and lattice Boltzmann methods, a face-centered-hyper-cubic lattice in four-dimensional space was used to obtain an isotropic stress tensor. To conserve computer memory, we develop a model which requires 14 moving directions instead of the usual 24 directions. Lattice Boltzmann models, describing two-phase fluid flows and magnetohydrodynamics, can be developed based on this simpler 14-directional lattice. Comparisons between three-dimensional spectral code results and results using our method are given for simple periodic geometries. An important property of the lattice Boltzmann method is that simulations for flow in simple and complex geometries have the same speed and efficiency, while all other methods, including the spectral method, are unable to model complicated geometries efficiently.     

超燃冲压发动机等截面隔离段中流动的LBM模拟

采用耦合的双分布函数格子Boltzmann方法模拟超燃冲压发动机中隔离段的流动.计算结果反映了隔离段内流场的基本结构,表明LBM在隔离段的模拟中是-种具有潜力的数值计算方法.