Gold sputtered electrode surfaces enhance direct electron transfer reactions of human cytochrome P450s

We immobilized human cytochrome P450 (CYP), a membrane-bound enzyme, onto both smooth and nanostructured surfaces of gold electrodes via a naphthalene thiolate monolayer film. Rapid electron transfer of CYP with an electrode as a redox partner took place when the enzyme was immobilized onto an electrode surface with nanostructures. This structure was easily prepared by conventional sputtering techniques. A well-defined pair of peaks was observed at ? 0.175 V (vs. SHE) with the largest heterogeneous electron transfer rate constant of 340 s^? 1 for human CYP. The positive redox potential shift of 45 mV upon drug (testosterone) binding was clearly detected, which corresponded to a change in the spin states of heme iron in CYP. The present study showed that gold sputtered surfaces are very useful for direct electron transfer reactions of human CYP isoforms.     

Modeling hydrate formation conditions in the presence of electrolytes and polar inhibitor solutions

In this paper, a new predictive model is proposed for prediction of gas hydrate formation conditions in the presence of single and mixed electrolytes and solutions containing both electrolyte and a polar inhibitor such as monoethylene glycol (MEG), diethylene glycol (DEG) and triethylene glycol (TEG). The proposed model is based on the γ–φ approach, which uses modified Patel–Teja equation of state (VPT EOS) for characterizing the vapor phase, the solid solution theory by van der Waals and Platteeuw for modeling the hydrate phase, the non-electrolyte NRTL-NRF local composition model and Pitzer–Debye–Huckel equation as short-range and long-range contributions to calculate water activity in single electrolyte solutions. Also, the Margules equation was used to determine the activity of water in solutions containing polar inhibitor (glycols). The model predictions are in acceptable agreement with experimental data. For single electrolyte solutions, the model predictions are similar to available models, while for mixtures of electrolytes and mixtures of electrolytes and inhibitors, the proposed model gives significantly better predictions. In addition, the absolute average deviation of hydrate formation pressures (AADP) for 144 experimental data in solutions containing single electrolyte is 5.86% and for 190 experimental data in mixed electrolytes solutions is 5.23%. Furthermore, the proposed model has an AADP of 14.13%, 5.82% and 5.28% in solutions containing (Electrolyte + MEG), (Electrolyte + DEG) and (Electrolyte + TEG), respectively.     

Assembly of succinic acid and isoxazolidine motifs in a single entity to mitigate CO2 corrosion of mild steel in saline media

Inhibition of CO₂ corrosion of mild steel in 0.5 M NaCl under atmospheric pressure at 40 °C as well as high pressure (10 bar) at 120 °C by 2-[2-methyl-4(or 5)-alkylisoxazolidin-5(or 4)-yl)methyl]succinic acids, a new class of molecules having inhibitive motifs of succinic acid, isoxazolidine and hydrophobic alkyl chain assembled in a single entity, has been examined by gravimetric and electrochemical methods. Inhibitor molecule containing CH₃(CH₂)₈ outperformed its counterpart with a shorter hydrophobe CH₃(CH₂)₄ and two other commercial imidazoline-based inhibitors. The effectiveness of these new inhibitors was also evaluated by electrochemical impedance spectroscopy. The inhibition efficiency by EIS was found to be 75%, 91% and 98% in the presence of 1, 5 and 20 ppm, respectively, at 40 °C. The potentiodynamic polarization studies indicated that the new inhibitors act as anodic inhibitors. The adsorption of the synthesized inhibitors follows Temkin adsorption isotherm model with favorable high values of –ΔG°_ads and −ΔH°_ads pointing the inhibitors adsorbed on the metal surface by chemisorption process. The XPS study confirmed the adsorption of the inhibitors on the metal surface.     

The energy spectrum of 662 keV photons in a water equivalent phantom

Investigation is made on the energy spectrum of photons originating from interactions of 662 keV primary gamma-ray photons emitted by a point source positioned at the centre of a water equivalent solid phantom of dimensions 19 cm×19 cm×24 cm. Peaks resulting from total energy loss (photopeak) and multiple and back scattering have been observed using a 51 mm×51 mm NaI(Tl) detector; good agreement being found between the measured and simulated response functions. The energy spectrum of the gamma photons obtained through the Monte Carlo simulation reveals local maxima at about 100 keV and 210 keV, being also observed in the experimental response function. Such spectra can be used as a method of testing the water equivalence of solid phantom media before their use for dosimetry measurements.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

HPLC-PDA analysis of ACE-inhibitors,hydrochlorothiazide and indapamide utilizing design of experiments

A simple, rapid, precise, accurate and sensitive high performance liquid chromatographic method has been developed for simultaneous determination of ACE inhibitors with hydrochlorothiazide and indapamide in pharmaceutical formulations. ‘Design of Experiments’ (DoE) using ‘central composite design’ (CCD) was applied to facilitate method development and optimization. Mobile phase was optimized utilizing response surface methodology using Design Expert software. Chromatographic separation was achieved on Hypersil®-Gold C₁₈ (100 × 4.6 mm, 3 μm, Thermo Fisher Scientific, USA), column at 25 °C. The mobile phase was 58% buffer (5 mM KH₂PO₄, containing triethylamine 0.25 ml/L), 25% acetonitrile and 17% methanol (pH adjusted to 2.8 ± 0.1). The analysis was performed at 215 nm. The mobile phase flow rate was 1.0 ml/min and injection volume 10 μl. The method was validated for linearity, limits of quantitation and detection, accuracy, precision, ruggedness and robustness as per the International Conference on Harmonization (ICH) guidelines. Calibration curves (for lisinopril, hydrochlorothiazide, captopril, imidapril, perindopril, indapamide and trandolapril) were linear in the concentration range of 5–35 μg/ml. The limit of detection and limit of quantitation for experimental drugs ranged from 0.03 to 0.61 and 0.08–1.84 μg/ml respectively.     

Molecular design and structural optimization of potent peptide hydroxamate inhibitors to selectively target human ADAM metallopeptidase domain 17

Human ADAMs (a disintegrin and metalloproteinases) have been established as an attractive therapeutic target of inflammatory disorders such as inflammatory bowel disease (IBD). The ADAM metallopeptidase domain 17 (ADAM17 or TACE) and its close relative ADAM10 are two of the most important ADAM members that share high conservation in sequence, structure and function, but exhibit subtle difference in regulation of downstream cell signaling events. Here, we described a systematic protocol that combined computational modeling and experimental assay to discover novel peptide hydroxamate derivatives as potent and selective inhibitors for ADAM17 over ADAM10. In the procedure, a virtual combinatorial library of peptide hydroxamate compounds was generated by exploiting intermolecular interactions involved in crystal and modeled structures. The library was examined in detail to identify few promising candidates with both high affinity to ADAM17 and low affinity to ADAM10, which were then tested in vitro with enzyme inhibition assay. Consequently, two peptide hydroxamates Hxm-Phe-Ser-Asn and Hxm-Phe-Arg-Gln were found to exhibit potent inhibition against ADAM17 (K_i = 92 and 47 nM, respectively) and strong selectivity for ADAM17 over ADAM10 (∼7-fold and ∼5-fold, S = 0.86 and 0.71, respectively). The structural basis and energetic property of ADAM17 and ADAM10 interactions with the designed inhibitors were also investigated systematically. It is found that the exquisite network of nonbonded interactions involving the side chains of peptide hydroxamates is primarily responsible for inhibitor selectivity, while the coordination interactions and hydrogen bonds formed by the hydroxamate moiety and backbone of peptide hydroxamates confer high affinity to inhibitor binding.     

Enhanced Raman spectroscopy coupled to chemometrics for identification and quantification of acetylcholinesterase inhibitors

In this work, we present a new complete method using Surface Enhanced Raman Spectroscopy (SERS) and chemometrics for the qualitative and quantitative detection of pesticides by measuring the acetylcholinesterase (ACHE) activity. The Raman SERS is not only used for measuring the ACHE activity, but also for the direct detection of pesticides individually and for their identification. Gold nanoparticles (AuNPs) were used as dynamic SERS substrates for sensitive monitoring of ACHE activity in the presence of very low levels of organophosphate and carbamate pesticides, chemical warfare agents that are known to be ACHE inhibitors. The lowest detectable level for paraoxon was determined at 4.0 × 10⁻¹⁴ M and 1.9 × 10⁻⁹ M for carbaryl. The use of the enzyme allowed limits of detection for both pesticides that were much lower than the limits obtained by direct SERS analysis of the pesticides. The system shows a linear relationship between the intensity band at 639 cm⁻¹ and pesticide concentration. These results suggest that this biosensor could be used in the future for the non-selective detection of all ACHE inhibitors at very low concentrations with possible identification of the inhibitor.     

The electrochemical properties of thermophilic cytochrome P450 CYP119A2 at extremely high temperatures in poly(ethylene oxide)

The electrochemical measurements were carried out by using thermophilic cytochrome P450 CYP119A2 (P450st) modified with poly(ethylene oxide) (PEO) in PEO₂₀₀ as an electrochemical solvent. The PEO modified P450st gave clear reduction–oxidation peaks by cyclic voltammetry in oxygen-free PEO₂₀₀ up to 120 °C. The midpoint potential measured for the P450st was −120 mV vs. [Fe(CN)₆]⁴⁻/[Fe(CN)₆]³⁻ at 120 °C. The peak separation, ΔE, was 16 mV at 100 mV/s. The estimated electron transfer rate of PEO-P450st at 120 °C was 35.1 s⁻¹. The faster electron transfer reaction was achieved at higher temperatures. The electrochemical reduction of dioxygen was observed at 115 °C with the PEO-modified P450st system.     

Photo-induced synthesis and in vitro biological activity of a Sansalvamide A analog

Photoinduced single electron transfer (SET) cyclization processes for synthesis of a Sansalvamide A analog containing double pharmacophores (cyclicpeptides and O-phthalimide moiety) is described to develop novel antitumor cyclopeptide drug. The resultant compound is active in drug-sensitive HeLa, HepG-2 and MCF-7 cell lines. Specifically, the title compound was found to inhibit MCF-7 cells with an IC₅₀ value of 15 μM (13.4 μg/mL), which may serve as a potential candidate for antitumor drug development.     

Free radical scavenging and COX-2 inhibition by simple colon metabolites of polyphenols: A theoretical approach

Free radical scavenging and inhibitory potency against cyclooxygenase-2 (COX-2) by two abundant colon metabolites of polyphenols, i.e., 3-hydroxyphenylacetic acid (3-HPAA) and 4-hydroxyphenylpropionic acid (4-HPPA) were theoretically studied. Different free radical scavenging mechanisms are investigated in water and pentyl ethanoate as a solvent. By considering electronic properties of scavenged free radicals, hydrogen atom transfer (HAT) and sequential proton loss electron transfer (SPLET) mechanisms are found to be thermodynamically probable and competitive processes in both media. The Gibbs free energy change for reaction of inactivation of free radicals indicates 3-HPAA and 4-HPPA as potent scavengers. Their reactivity toward free radicals was predicted to decrease as follows: hydroxyl >> alkoxyls > phenoxyl ≈ peroxyls >> superoxide. Shown free radical scavenging potency of 3-HPAA and 4-HPPA along with their high μM concentration produced by microbial colon degradation of polyphenols could enable at least in situ inactivation of free radicals. Docking analysis with structural forms of 3-HPAA and 4-HPPA indicates dianionic ligands as potent inhibitors of COX-2, an inducible enzyme involved in colon carcinogenesis. Obtained results suggest that suppressing levels of free radicals and COX-2 could be achieved by 3-HPAA and 4-HPPA indicating that these compounds may contribute to reduced risk of colon cancer development.     

High performance solid oxide fuel cells with electrocatalytically enhanced (La,Sr)MnO3 cathodes

The conventionally mixed LSM–YSZ, LSM impregnated YSZ (LSM + YSZ) and Pd impregnated LSM–YSZ (Pd + LSM–YSZ) cathodes, were prepared and evaluated by electrochemical impedance spectroscopy and single cell testing. The electrochemical performance of the impregnated cathodes have been significantly boosted due to the formation of nano-sized LSM and Pd particles on the YSZ and LSM–YSZ substrates, respectively, and in turn, the increased area of the triple phase boundary (TPB) where the O₂ reduction reaction occurs, the power densities as high as 1.42 and 0.83 W cm^?2 at 750 °C were achieved from single cells with the Pd + LSM–YSZ and LSM + YSZ cathodes, respectively, in contrast to 0.20 W cm^?2 from the single cell with the conventional LSM–YSZ cathode. Suggesting the Pd + LSM–YSZ and LSM + YSZ cathodes can be well used for the intermediate temperature solid oxide fuel cells (IT-SOFCs).     

Design,synthesis and biological evaluation of novel 2-phenyl-4,5,6,7-tetrahydro-1H-​indole derivatives as potential anticancer agents and tubulin polymerization inhibitors

A new series of 2-phenyl-4,5,6,7-tetrahydro-1H-?indole derivatives as tubulin polymerization inhibitors were synthesized and evaluated for the anti-proliferative activities. All newly prepared compounds were tested for their antiproliferative activity in vitro on the human breast cancer cell line (MCF-7) and human lung adenocarcinoma cell line (A549). Among them, compound 7b with a 4-methoxyl substituent at the phenylhydrazone moiety exhibited the most potent anticancer activity against MCF-7 and A549 with IC₅₀ values of 1.77 ± 0.37 and 3.75 ± 0.11 μM, respectively. Interestingly, 7b displayed significant selectivity in inhibiting cancer cells over LO2 (normal human liver cells). Further mechanism studies revealed that 7b significantly arrested cell cycle at G2/M phase and induced apoptosis in a dose-dependent manner. Additionally, 7b effectively inhibited tubulin polymerization with an inhibitory manner similar to that of colchicine. Furthermore, molecular docking study suggested that 7b had high binding affinities for the colchicine binding pocket of tubulin. Hence, this study demonstrates for the first time that tetrahydroindole can be used as a functional group for the design and development of new tubulin polymerization inhibitors.     

Proton (3 MeV) and copper (120 MeV) ion irradiation effects in low-density polyethylene (LDPE)

Low-density polyethylene (LDPE) was irradiated with proton (3 MeV) and copper (120 MeV) ions to analyze the induced modifications with respect to optical and structural properties. In the present investigation, the fluence for proton irradiation was varied up to 2×10¹⁵ protons cm⁻², while that for copper beam was kept in the range of 1×10¹ to 1×10¹³ ions cm⁻² to study the swift heavy ion-induced modifications in LDPE. Ultraviolet–visible (UV–vis), FTIR and X-ray diffraction (XRD) techniques were utilized to study the induced changes. The analysis of UV–vis absorption studies reveals that there is decrease of optical energy gap up to 43% on proton irradiation (at 2×10¹⁵ ions cm⁻²), whereas the copper beam (at 1×10¹³ ions cm⁻²) leads to a decrease of 51%. FTIR analysis indicated the presence of unsaturations due to vinyl end groups in the irradiated sample. The formation of OH and CO groups has also been observed. XRD analysis revealed that the semi-crystalline LDPE losses its crystallinity on swift ion irradiation. It was found that the proton beam (2×10¹⁵ ions cm⁻²) decreased the crystallite size by 23% whereas this decrease is of 31% in case of the copper ion-irradiated LDPE at 1×10¹³ ions cm⁻².     

Life test of DMFC using poly(ethylene glycol)bis(carboxymethyl)ether plasticized PVA/PAMPS proton-conducting semi-IPNs

A novel, low-cost proton-conducting semi-IPN has been successfully prepared from PVA/PAMPS blends by incorporating poly(ethylene glycol)bis(carboxymethyl)ether (PEGBCME) as a novel plasticizer. Although, the polymer is based on a relatively low content of PAMPS as a component of ion conducting sites, the resulting semi-IPN exhibited high proton conductivity (0.1 S cm⁻¹) at 25 °C, which afforded a higher power density of 51 mW cm⁻² at 80 °C. A striking feature is that a long-term initial performance is achieved with a 130 h of stable fuel cell operation in DMFC mode due to effectively suppressed methanol crossover. This is a new record for a fully hydrocarbon membrane in DMFC, seeing that the PVA–PAMPS proton-conducting semi-IPNs are made simply of aliphatic skeletons.     

Simultaneous determination of diastereoisomeric and enantiomeric impurities in SSS-octahydroindole-2-carboxylic acid by chiral high-performance liquid chromatography with pre-column derivatization

SSS-Octahydroindole-2-carboxylic acid (SSS-Oic) is a key intermediate used in the synthesis of some angiotensin-converting enzyme (ACE) inhibitors. The separation of diastereoisomers and enantiomers of Oic was performed using a pre-column derivatization chiral HPLC method. Phenyl isothiocyanate (PITC) was used as the derivatization reagent. Three PITC derivatives of Oic stereoisomers were separated on an Ultron ES-OVM chiral column (150 mm × 4.6 mm, 5 μm). Derivatization conditions such as reaction temperature, reaction time and derivatization reagent concentration were investigated. The chromatographic conditions for separation of the three PITC-Oic derivatives were optimized. The method was successfully applied in the diastereoisomeric and enantiomeric purity test of SSS-Oic.     

Standard enthalpies of formation of Ce–Au congruent compounds (CeAu,CeAu2, and Ce14Au51)

The enthalpies of formation of Ce–Au congruent compounds (CeAu, CeAu₂, and Ce₁₄Au₅₁) have been determined at 1123 K and the standard enthalpies of formation at 298 K have been deduced from the measurements of enthalpy increments of single-phase samples. The following values (kJ/mole of atoms) are reported: Δ_fH°_1123 K (CeAu) = −75.2 ± 1.4, Δ_fH°_298 K (CeAu) = −76.2 ± 1.9, Δ_fH°_1123 K (CeAu₂) = −71.3 ± 2.0, Δ_fH°_298 K (CeAu₂) = −70.3 ± 2.2, Δ_fH°_1123 K (Ce₁₄Au₅₁) = −55.0 ± 1.7, and Δ_fH°_298 K (Ce₁₄Au₅₁) = −53.2 ± 1.9.     

Thermoluminescence characterization of newly developed Cu-doped lithium tetraborate materials

This work reports the thermoluminescence characterization of newly synthesized Li₂B₄O₇ (LTB) and LTB:Cu materials of single crystal and glassy structure. The following basic properties were investigated: glow curve, dose response, fading, reproducibility and batch uniformity. The Cu doped samples and the non-doped single crystal gave TL response, while the non-doped glassy LTB did not up to 10 kGy. LTB:Cu single crystals showed promising properties. Their glow curve consists of two well separated peaks (at 165 °C and 270 °C) in the 50–350 °C temperature region. The sensitivity of this material is about 5 times higher than that of the TLD-100. The most attractive feature of these LTB:Cu single crystals is their linear dose response in a very wide range: from 0.3 mGy to 10 kGy. Unfortunately this material is sensitive to light; the fading of irradiated samples is very quick in daylight, but at room temperature and kept in dark the fading of the 270 °C peak is less than 6%.