首页 | 本学科首页   官方微博 | 高级检索  
     检索      

硅烷化对NH3选择性催化还原NOx催化剂CuCe/BEA水热稳定性的促进作用
引用本文:徐书浩,林青瑾,刘双,刘静莹,徐海迪,王健礼,陈耀强.硅烷化对NH3选择性催化还原NOx催化剂CuCe/BEA水热稳定性的促进作用[J].无机化学学报,2020,36(12):2385-2394.
作者姓名:徐书浩  林青瑾  刘双  刘静莹  徐海迪  王健礼  陈耀强
作者单位:四川大学化学学院, 四川省环境保护环境催化材料工程技术中心, 成都 610064;四川大学高分子研究所, 高分子材料工程国家重点实验室, 成都 610064;四川大学新能源与低碳技术研究院, 成都 610064;四川大学新能源与低碳技术研究院, 成都 610064;中国汽车技术研究中心移动源污染排放控制技术国家工程实验室, 天津 300300;四川大学国家烟气脱硫工程技术研究中心, 成都 610064;四川大学化学学院, 四川省环境保护环境催化材料工程技术中心, 成都 610064;中国汽车技术研究中心移动源污染排放控制技术国家工程实验室, 天津 300300;四川大学国家烟气脱硫工程技术研究中心, 成都 610064;四川大学化学学院, 四川省环境保护环境催化材料工程技术中心, 成都 610064;四川大学新能源与低碳技术研究院, 成都 610064;中国汽车技术研究中心移动源污染排放控制技术国家工程实验室, 天津 300300;四川大学国家烟气脱硫工程技术研究中心, 成都 610064
基金项目:国家自然科学基金(No.21802099)、四川省科技计划(No.2019YFS0498)和移动源污染排放控制技术国家工程实验室(No.NELMS2017A06)资助项目。
摘    要:采用硅烷化改性NH3选择性催化还原NOx催化剂CuCe/BEA,以提高催化剂的水热稳定性。X射线衍射、扫描电子显微镜和27Al核磁共振谱图等研究证实,硅烷化改性明显抑制BEA分子筛骨架中Si-O-Al键的水解,保持其结构完整,从而有效提高水热处理后CuCe/BEA的催化活性。氨气-程序升温脱附和原位漫反射傅里叶变换红外光谱研究结果表明,硅烷化改性的催化剂由于保持更完整的骨架结构能够形成更多的酸性位点。此外,氢气-程序升温还原和X射线光电子能谱测试表明,硅烷化改性有利于提高活性铜物种的分散性。因此,相比于CuCe/BEA催化剂,硅烷化改性的CuCeSi/BEA催化剂具有更多的酸性位点和高度分散的Cu物种,共同促进了催化剂的水热稳定性。

关 键 词:硅烷化  分子筛  水热稳定性  结构活性关系  多相催化
收稿时间:2020/6/17 0:00:00
修稿时间:2020/9/11 0:00:00

Promotional Effects of Silanization on the Hydrothermal Stability of CuCe/BEA Catalyst for Selective Catalytic Reduction of NOx with NH3
XU Shu-Hao,LIN Qing-Jing,LIU Shuang,LIU Jing-Ying,XU Hai-Di,WANG Jian-Li,CHEN Yao-Qiang.Promotional Effects of Silanization on the Hydrothermal Stability of CuCe/BEA Catalyst for Selective Catalytic Reduction of NOx with NH3[J].Chinese Journal of Inorganic Chemistry,2020,36(12):2385-2394.
Authors:XU Shu-Hao  LIN Qing-Jing  LIU Shuang  LIU Jing-Ying  XU Hai-Di  WANG Jian-Li  CHEN Yao-Qiang
Institution:Sichuan Provincial Environmental Protection Environmental Catalytic Materials Engineering Technology Center, College of Chemistry, Sichuan University, Chengdu 610064, China;State Key Laboratory of Polymer Materials Engineering, Institute of Polymer Science, Sichuan University, Chengdu 610064, China;Institute of New Energy and Low-Carbon Technology, Sichuan University, Chengdu 610064, China;Institute of New Energy and Low-Carbon Technology, Sichuan University, Chengdu 610064, China;National Engineering Laboratory for Mobile Source Emission Control Technology, China Automotive Technology & Research Center, Tianjin 300300, China;Sichuan University FGD(Flue Gas Desulfurization) State Engineering Research Center, Chengdu 610064, China;Sichuan Provincial Environmental Protection Environmental Catalytic Materials Engineering Technology Center, College of Chemistry, Sichuan University, Chengdu 610064, China;National Engineering Laboratory for Mobile Source Emission Control Technology, China Automotive Technology & Research Center, Tianjin 300300, China;Sichuan University FGD(Flue Gas Desulfurization) State Engineering Research Center, Chengdu 610064, China; Sichuan Provincial Environmental Protection Environmental Catalytic Materials Engineering Technology Center, College of Chemistry, Sichuan University, Chengdu 610064, China;Institute of New Energy and Low-Carbon Technology, Sichuan University, Chengdu 610064, China;National Engineering Laboratory for Mobile Source Emission Control Technology, China Automotive Technology & Research Center, Tianjin 300300, China;Sichuan University FGD(Flue Gas Desulfurization) State Engineering Research Center, Chengdu 610064, China
Abstract:The hydrothermal stability of CuCe/BEA catalyst is improved by its silanization for selective catalytic reduction of NOx with NH3 (NH3-SCR). The results indicate that the silanization modification effectively enhances the catalytic activity of CuCe/BEA after the hydrothermal treatment due to significantly inhibit the hydrolysis of Si-O-Al bonds from the BEA skeleton to maintain structural integrity, revealed by X-ray diffraction (XRD), scanning electron microscope (SEM) and 27Al nuclear magnetic resonance (27Al NMR). More complete skeleton structure of CuCeSi/BEA catalyst results in the formation of more acid sites after the hydrothermal treatment, confirmed by NH3-temperature programmed desorption (NH3-TPD) and in situ diffuse reflectance infrared transform spectroscopy (in situ DRIFTS). Moreover, H2-temperature programmed reduction (H2-TPR) and X-ray photoelectron spectrum (XPS) show that silanization is beneficial to facilitate the dispersion of active copper ions after the hydrothermal treatment. Therefore, more acid sites and highly dispersed Cu species together contribute to higher hydrothermal stability of silanized CuCeSi/BEA than CuCe/BEA catalyst.
Keywords:silanization  zeolite  hydrothermal stability  structure-activity relationships  heterogeneous catalysis
点击此处可从《无机化学学报》浏览原始摘要信息
点击此处可从《无机化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号