|
|||||
|
|
| 钨铜药型罩制备及其侵彻性能研究 | |
| 引用本文： | 刘迎彬,沈兆武,刘天生,胡晓艳,孙素杰.钨铜药型罩制备及其侵彻性能研究[J].实验力学,2012,27(5):618-622. |
| 作者姓名： | 刘迎彬 沈兆武 刘天生 胡晓艳 孙素杰 |
| 作者单位： | 1. 中国科学技术大学近代力学系,安徽合肥230027;中北大学化工与环境学院,山西太原030051 2. 中国科学技术大学近代力学系,安徽合肥,230027 3. 中北大学化工与环境学院,山西太原,030051 4. 中国兵器工业集团第五二研究所烟台分所冲击环境材料技术重点实验室,山东烟台,264003 |
| 基金项目： | 国家自然科学基金(11072222)(51174183)和(51134012)资助 |
| 摘 要： | 为了提高钨铜药型罩的侵彻性能和稳定性,在传统钨铜制备方法的基础上,采用机械合金化方法进行混粉,利用旋模压制方法进行压制药型罩毛坯,再在甲醇裂解气体的保护下进行烧结,最终制备出钨铜药型罩.利用排水法测试了烧结前后钨铜药型罩的密度.并将制备出的钨铜药型罩与紫铜板药型罩进行侵彻性能的实验比较.实验结果表明:钨铜药型罩烧结后的密度比烧结前的密度要低一些,但其对603均质装甲钢的侵彻性能要优于紫铜板药型罩的侵彻性能,与紫铜板药型罩相比,其穿深可以提高45％. |
| 关 键 词： | 钨铜药型罩 聚能装药 聚能粒子流 |
| 修稿时间： | 5/9/2012 12:00:00 AM |
On the Preparation and Penetration Performance of Tungsten-Copper Shaped Charge Liner |
|
| LIU Ying-bin,SHEN Zhao-wu,LIU Tian-sheng,HU Xiao-yan and SUN Su-jie.On the Preparation and Penetration Performance of Tungsten-Copper Shaped Charge Liner[J].Journal of Experimental Mechanics,2012,27(5):618-622. | |
| Authors: | LIU Ying-bin SHEN Zhao-wu LIU Tian-sheng HU Xiao-yan and SUN Su-jie |
| Institution: | 1.Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, China; 2.School of Chemistry and Environment Engineering North University of China, Taiyuan 030051, China;Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, China;School of Chemistry and Environment Engineering North University of China, Taiyuan 030051, China;Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, China;Science and Technology on Materials in Impact Environment Laboratory Yantai Sub-institute of China Ordnance Industries Group Corporation, Yantai 264003, China |
| Abstract: | In order to improve the penetration performance and stability of tungsten-copper shaped charge liner, a new W-Cu shaped charge liner was prepared. Based on the traditional tungsten-copper preparation method, a series of new technology was adopted including using mechanical alloying method to mix powder, using spin-mode suppression method to press the blank of shaped charge liner then sintered under the protection of methanol cracking gas. Density of W-Cu shaped charge liner before and after sintering was tested by drainage method. The penetration performance was compared experimentally between the W-Cu shaped charge liner and the copper plate shaped charge liner. Results show that the density of W-Cu shaped charge liner after sintering is lower than the density before sintering; for 603 homogeneous armor steel plate, the penetration performance of W-Cu shaped charge liner is superior to copper shaped charge liner, and the penetration depth increases up to 45% compared with copper plate shaped charge liner. |
| Keywords: | W-Cu shaped charge liner shaped charge shaped charge granular jet |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《实验力学》浏览原始摘要信息 | |
| 点击此处可从《实验力学》下载免费的PDF全文 | |