Epitaxial growth of yttria-stabilised zirconia buffer layers on X-cut LiNbO3 for superconducting electrodes

We report on the epitaxial growth of yttria-stabilised zirconia (YSZ) buffer layers on X-cut LiNbO₃ (LNO) single crystals by pulsed laser deposition. Despite the low chemical stability of the substrates at high temperature, high quality fully reproducible films were obtained over a relatively broad range of processing conditions. The films were (00h) out-of-plane single oriented and the in-plane edge of the YSZ unit cell was aligned with the polar axis of the LNO. However, the YSZ deposition also promoted the formation of the compound LiNb₃O₈. This compound is epitaxial and located at the interface. The homogeneous YSZ film presents a uniform surface, free of outgrowths and with a low roughness. These characteristics are suitable for the epitaxial growth of other oxides, as has been demonstrated with the preparation of YBa₂Cu₃O₇/CeO₂/YSZ/LNO heterostructures. The superconducting YBa₂Cu₃O₇ films were epitaxial, with the c axis perpendicular to the surface and single in-plane orientation, and presented good transport properties (critical temperatures around 86 K and critical current densities close to 10⁶ A/cm² at 77 K). Received: 5 April 2001 / Accepted: 30 July 2001 / Published online: 30 October 2001