首页 | 本学科首页   官方微博 | 高级检索  
     检索      

利用GEANT4和FLUKA研究质子诱发散裂反应出射中子双微分截面
引用本文:张苏雅拉吐,罗飞,陈志强,特木尔巴根.利用GEANT4和FLUKA研究质子诱发散裂反应出射中子双微分截面[J].原子核物理评论,2016,33(3):370-373.
作者姓名:张苏雅拉吐  罗飞  陈志强  特木尔巴根
作者单位:1.内蒙古民族大学物理与电子信息学院, 内蒙古 通辽 028000;
基金项目:国家自然科学基金资助项目(11605097);内蒙古民族大学博士科研启动基金(BS365);中国科学院ADS项目302课题资助项目(Y103010ADS)
摘    要:在中高能质子诱发散裂反应相关核工程设计中,可靠的蒙特卡罗模拟程序结合核反应理论模型具有较好的理论指导意义。本工作中,利用GEANT4耦合INCL4和ABLA理论模型以及FLUKA耦合PEANUT模型模拟计算了几百MeV至几个GeV质子轰击Be,Al,Fe,W,U等靶后30°,60°,120°,150°出射角产生的散裂中子双微分截面,并与现有实验数据进行了比较。结果发现,FLUKA和GEANT4模拟计算较好地再现了Al,Fe,W,U等靶实验测量数据。然而,模拟结果明显低估了Be靶出射中子能量小于10 MeV能区的实验数据。For the design of nuclear engineering related with medium-high energy proton induced spallation reaction,the reliable Monte Carlo simulation codes coupled with nuclear reaction models have a good theoretical guidance.In this work,the production spallation neutron double differential cross sections at 30°,60°,120°,150°emission angle for Be,Al,Fe,W,U target materials at incident proton energies between several hundred MeV and GeV are theoretically calculated by using the GEANT4 coupled INCL4 and ABLA,and the FLUKA coupled PEANUT.The calculated results were compared with the available experimental data.It is found that the GEANT4 and FLUKA calculations well reproduced the experimental measurement of Al,Fe,W,U target materials.However,calculations obviously underestimated the emission neutrons of Be target for lower than 10 MeV energy range.

关 键 词:GEANT4    FLUKA    蒙特卡罗模拟程序    散裂中子双微分截面
收稿时间:2015-12-21

GEANT4 and FLUKA Simulations of Neutron Production Double Differential Cross Sections in Proton Induced Spallation Reaction
ZHANG Su-ya-la-tu,LUO Fei,CHEN Zhiqiang,Temuerbagen.GEANT4 and FLUKA Simulations of Neutron Production Double Differential Cross Sections in Proton Induced Spallation Reaction[J].Nuclear Physics Review,2016,33(3):370-373.
Authors:ZHANG Su-ya-la-tu  LUO Fei  CHEN Zhiqiang  Temuerbagen
Institution:1.Inner Mongolia University for the Nationalities, College of Physics and Electronics Information, Tongliao 028000, Inner Mongolia, China;2.University of Science and Technology of China, Hefei 230027, China;3.Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China
Abstract:For the design of nuclear engineering related with medium-high energy proton induced spallation reaction,the reliable Monte Carlo simulation codes coupled with nuclear reaction models have a good theoretical guidance.In this work,the production spallation neutron double differential cross sections at 30°,60°,120°,150°emission angle for Be,Al,Fe,W,U target materials at incident proton energies between several hundred MeV and GeV are theoretically calculated by using the GEANT4 coupled INCL4 and ABLA,and the FLUKA coupled PEANUT.The calculated results were compared with the available experimental data.It is found that the GEANT4 and FLUKA calculations well reproduced the experimental measurement of Al,Fe,W,U target materials.However,calculations obviously underestimated the emission neutrons of Be target for lower than 10 MeV energy range.
Keywords:GEANT4  FLUKA  Monte Carlo simulation code  spallation neutron double differential cross section
本文献已被 CNKI 等数据库收录!
点击此处可从《原子核物理评论》浏览原始摘要信息
点击此处可从《原子核物理评论》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号