首页 | 本学科首页   官方微博 | 高级检索  
     检索      

混合物物态方程的计算
引用本文:王学容,王建国.混合物物态方程的计算[J].强激光与粒子束,2011,23(8).
作者姓名:王学容  王建国
作者单位:北京应用物理与计算数学研究所, 北京 100094
基金项目:国家自然科学基金项目(10974021)
摘    要: 在采用体积相加原理计算混合物物态方程的基础上,建立了一种物理模型确定混合物温度。根据混合物中各组分温度和压强平衡条件,采用压强-密度迭代方法计算给出混合物物态方程,编制了两种组分的混合物物态方程计算程序。为检验建立的温度模型的合理性及程序的有效性,分析了不同密度、温度状态的氢(H2)和钨(W)组成的混合物状态参量,计算了以下情形及其组合情形的混合物物态方程:H2和W以不同质量比混合;质量比固定,单组分状态不同;温度区间和密度区间不同。研究表明:实际应用中在建立的混合物温度模型基础上确定的混合物物态方程是合理的。

关 键 词:物态方程  混合物  体积相加原理  压强-密度迭代方法
收稿时间:1900-01-01;

Calculation of equation of state of material mixture
Wang Xuerong,Wang Jianguo.Calculation of equation of state of material mixture[J].High Power Laser and Particle Beams,2011,23(8).
Authors:Wang Xuerong  Wang Jianguo
Institution:(Institute of Applied Physics and Computational Mathematics, Beijing 100094, China)
Abstract:Based on volume sum rule for computing equation of state(EOS) of mixture materials,a physical model is proposed to determine mixture temperature.According to equilibrium conditions of component temperatures and pressures,EOS of mixture is calculated using iterations of pressure and density.To verify and validate proposed temperature model,EOS for mixture with H2 and W is calculated and analyzed,and it is shown that proposed temperature model is reasonable.Then EOSs for the following cases,(i) various concen...
Keywords:equation of state  mixture  volume sum rule  iterations of pressure and density  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号