Arsenite oxidation and arsenate determination by the molybdene blue method

Based on the similarity in properties of arsenate and phosphate, the colorimetric method using the molybdene blue complex was tested in order to determine low As(V) concentration in waters. The influence of complex formation time, daylight, temperature and competitive anions (silicate and sulphate) upon complex formation was determined. Optimal complex formation was reached in 1 h at 20±1 °C and was slightly favoured when developed in daylight. The formation rate declined with decreasing reaction temperature and no influence of any of the competitive anions tested (at concentrations usually found in natural waters of granitic areas) was noted. The detection limit of this method was 20 μg As(V) l⁻¹. This simple, fast and sensitive arsenic determination method is suitable for field analysis, especially for waters containing low levels of phosphate and organic matter. Through arsenate determination, this colorimetric method allowed the arsenite oxidation efficiency of five common industrial oxidants to be compared. H₂O₂ and MnO_2(s) were not considered as effective oxidants as a high excess was necessary to ensure As(III) oxidation. NaOCl and KMnO₄ were promising oxidants as they allowed complete arsenite oxidation with a small excess for NaOCl or even less than the electron stoichiometric ratio in the case of KMnO₄. FeCl₃ was the most effective oxidant among the reagents tested here.