首页 | 本学科首页   官方微博 | 高级检索  
     检索      

光纤信道压力作用下量子密钥分发误码率建模与仿真
引用本文:裴昌幸,韩宝彬,赵楠,刘丹,阎毅.光纤信道压力作用下量子密钥分发误码率建模与仿真[J].光子学报,2009,38(2):422-424.
作者姓名:裴昌幸  韩宝彬  赵楠  刘丹  阎毅
作者单位:西安电子科技大学,综合业务网与关键技术国家重点实验室,西安,710071
基金项目:国家自然科学基金,国家重点实验室专项资金资助项目,陕西省科技攻关计划 
摘    要:采用半正定算子测量建立了光纤信道压力作用下的误码率分析模型.以熊猫型保偏光纤为例,用所建模型进行了数值分析.结果表明: 相同作用角下,接收端误码随外界压力的增加呈上升趋势;相同压力下,除0和π/2外,接收端误码随着作用角度的增加而增加.在归一化力参量小于0.4或作用角小于π/12时,误码率小于5%.

关 键 词:光纤信道  误码率  半正定算子测量  量子密钥分发
收稿时间:2007-09-29
修稿时间:2007-11-12

QBER Modeling and Simulation of QKD in Optical Fiber with Force
PEI Chang-xing,HAN Bao-bin,ZHAO Nan,LIU Dan,YAN Yi.QBER Modeling and Simulation of QKD in Optical Fiber with Force[J].Acta Photonica Sinica,2009,38(2):422-424.
Authors:PEI Chang-xing  HAN Bao-bin  ZHAO Nan  LIU Dan  YAN Yi
Institution:State Key Laboratory of Integrated Service Networks;Xidian University;Xi'an 710071;China
Abstract:The theoretical model of QBER (Quantum Bit Error Rate) was established with POVM (Positive Operator Valued Measurement).PANDA fiber as an example was simulated based on the model.The research results show that under the same angle,bit error rate (BER) increases with increase of force amplitude; and BER increases with increase of angle,under the same force without the consideration of 0 and π/2.For normalized force less than 0.4 or the angle less than π/12,the BER could be lower than 5%.
Keywords:Optical fiber channel  BER  POVM  QKD
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光子学报》浏览原始摘要信息
点击此处可从《光子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号