| Abstract: | Hybrid microspheres of poly(methyl acrylate‐co‐divinylbenzene) (PMADVB) with a thin and porous nickel–phosphorus (Ni–P) alloy layer were prepared via suspension polymerization and electroless nickel plating. The characterization of pristine and nickel‐coated microspheres was carried out with a differential scanning calorimeter and a scanning electron spectroscope equipped with an energy‐dispersive system. The glass‐transition range of Ni–P‐coated PMADVB was broadened and extended in the higher temperature direction. This effect allowed the PMADVB network to embrace more diversified energy states of the segment motion, this being a desired feature for damping sound waves. The low‐frequency (100–1000‐Hz) sound absorption behavior of the microspheres was tested with a sound attenuation kit. Besides the testing of their low‐frequency damping performance, an investigation into the ultrasonic‐wave (～35 kHz) absorption feature of the microspheres was conducted through chemical means; that is, the attenuation to the ultrasonic wave with respect to the unprotective situation was assessed through the chemisorption extent of copper ions on a biomass adsorbent. The Ni–P deposition layer was found to augment the damping capacity of the polymer network. The alloy layer was determined to cause an expansion of the glass‐transition range of PMADVB and its wave‐scattering capability because this layer was made up of submicrometer metallic grains. In this work, the particulars of the metal–polymer interactions were associated with a core–shell structure. The metal outer layer was thought to create a spherical temperature field inside the PMADVB network, and concerted motions of the polymer segments resulted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2710–2723, 2004 |
