| Abstract: | To enable the use of GaAs‐based devices as chemical sensors, their surfaces must be chemically modified. Reproducible adsorption of molecules in the liquid phase on the GaAs surfaces requires controlled etching procedures. Several analytical methods were applied, including Fourier transform infrared spectroscopy (FTIRS) in attenuated total reflection and multiple internal reflection mode (ATR/MIR), high‐resolution electron energy loss spectroscopy (HREELS), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) for the analysis of GaAs (100) samples treated with different wet‐etching procedures. The assignment of the different features due to surface oxides present in the vibrational and XPS spectra was made by comparison with those of powdered oxides (Ga2O3, As2O3 and As2O5). The etching procedures here described, namely, those using low concentration HF solutions, substantially decrease the amount of arsenic oxides and aliphatic contaminants present in the GaAs (100) surfaces and completely remove gallium oxides. The mean thickness of the surface oxide layer drops from 1.6 nm in the raw sample to 0.1 nm after etching. However, in presence of light, water dissolution of arsenic oxides is enhanced, and oxidized species of gallium cover the surface. Copyright © 2005 John Wiley & Sons, Ltd. |
