Versatile gold-polymer nanointerfaces probed by GISAXS

An increasing trend toward integration of polymers in microelectronics and organic electronics has recently boosted research focusing in metal-polymer interfaces. These two materials differ vastly, with the former forming dense, crystalline, cohesive structures and the latter forming open structures bound together by weak van der Waals forces. As a result, there is dire need to assess their surface features (e.g., roughness) and correlate them with corresponding growth parameters, as metal-polymer interfaces are mainly determined by the preparation process. Here, we report a laboratory-based grazing-incidence small-angle x-ray scattering (GISAXS) study on distinct gold-polymer interfaces fabricated with different growth mechanisms, utilizing in-plane and oblique sputter geometries. GISAXS provided an improved analytic scheme for the buried surface in free-standing 2D gold-polymer nanosheets (with 19% porosity) revealing their fractal structure (Porod slope: ?1.71). Two quantitative approaches (Height-Height Correlation and Power Spectral Density functions) were used to describe rough surfaces characterized by Atomic Force Microscopy (AFM) in consort with GISAXS data; different correlation length dependencies on growth time were revealed for gold rough surfaces grown on bare and polymerized Si. The results are considered pertinent to interfacial nanoscience and engineering, enabling statistical data collection from large surface areas, in a fast and nondestructive manner.     

Low-temperature formation and characterization of Cu2O nanoparticles in the binary gold alloys

Thermal analyses, using differential scanning calorimetry (DSC) and dilatometry, reveal an important anomaly at low temperature for Au-25 wt.% Cu composition after homogenization at 700°C during 2 hours under vacuum followed by heating up to 160°C before water quenching. This anomaly has been already observed and not explained. Surface characterization, using scanning electron microscopy (SEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM), exhibits a specific topography, consisting of a nanostructured surface. The precipitates of nanostructured particles are homogeneously scattered all over the surface for this 18-carat gold alloy. Moreover, X-ray photoelectron spectroscopy (XPS) shows that the composition of the observed particles corresponds to cuprous oxide phase (Cu₂O). The formation of such material can be explained by the diffusion of copper atoms from the lattice to the surface at 160°C. Pulsed radio-frequency glow discharge optical emission spectroscopy (RF GD-OES) further proves the proposed Cu₂O formation through a diffusion process. The appearance of such cuprous oxide nanoparticles on the Au-Cu alloy surface explains the low-temperature DSC and dilatometry anomaly and affects directly the surface electrical resistance at low temperature. These results might open a large gate for new ideas to investigate in catalytic, electronic, and antimicrobial activities.     

Surface and structural analysis of epitaxial La1−xSrx (Mn1−yCoy)zO3 films

In the present study were studied the ferromagnetic La_1−xSr_x (Mn_1−yCo_y)_zO₃ (LSMCO) films with Co content y = 0 to 0.18, grown on LaAlO₃ substrates by advantageous pulsed-injection metalorganic chemical vapor deposition technique. The LSMCO films exhibit negative colossal magnetoresistance effect; therefore, they are interesting as potential material for the applications in magnetic field sensing. The changes of lattice volume in the investigated LSMCO films were monitored by X-ray diffraction measurements revealing a transition from tensile to compressive strain with increase of Co content. Additionally, from the atomic force microscopy images, the surface smoothening with increase of y was determined. Despite the reduction of the out-of-plane lattice parameter of LSMCO, the increase of lattice volume in the whole Co-doping range was observed. The X-ray photoelectron spectroscopy combined with Ar⁺ ion sputtering was used for the investigation of chemical composition of the LSMCO films and demonstrated the change and redistribution of oxidation states of Mn and Co on the surface and in the volume of the films. Regardless of the structural changes and charge distribution of Co and Mn cations, epitaxial LSMCO exhibits ferromagnetic properties and magnetoresistance values increases with augmenting Co content in the range of y = 0 to 0.18.     

Atomic force microscopy study of polypropylene-based self-reinforced composites

Self-reinforced composites are polymeric materials formed by a reinforcement core and a low-melting point skin, which acts as a matrix after the consolidation step. These materials are widely exploited in industrial applications for their mechanical resistance and durability, which are themselves influenced by processing conditions and polymer composition. In the present work, two similar polypropylene-based commercial fabrics were used to evaluate the surface modifications after laminate compaction and after artificial aging using atomic force microscopy. The results were correlated with the chemical and physical-chemical interactions obtained from scanning electron microscopy, transmission electron microscopy, raman and thermal analysis experiments. Single tape consolidated laminate before and after aging displayed different superficial features that can explain the differences in the macroscopic behavior of the two products.     

Natural and artificial light-harvesting systems utilizing the functions of carotenoids

Carotenoids are essential pigments in natural photosynthesis. They absorb in the blue–green region of the solar spectrum and transfer the absorbed energy to (bacterio-)chlorophylls, and so expand the wavelength range of light that is able to drive photosynthesis. This process is an example of singlet–singlet energy transfer and so carotenoids serve to enhance the overall efficiency of photosynthetic light reactions. Carotenoids also act to protect photosynthetic organisms from the harmful effects of excess exposure to light. In this case, triplet–triplet energy transfer from (bacterio-)chlorophyll to carotenoid plays a key role in this photoprotective reaction. In the light-harvesting pigment–protein complexes from purple photosynthetic bacteria and chlorophytes, carotenoids have an additional role, namely the structural stabilization of those complexes. In this article we review what is currently known about how carotenoids discharge these functions. The molecular architecture of photosynthetic systems will be outlined to provide a basis from which to describe the photochemistry of carotenoids, which underlies most of their important functions in photosynthesis. Then, the possibility to utilize the functions of carotenoids in artificial photosynthetic light-harvesting systems will be discussed. Some examples of the model systems are introduced.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Numerical approximation of AR‐XPS spectra for rough surfaces considering the effect of electron shadowing

A computational scheme is presented that takes into account the topography, i.e. the shadowing and hence the local emission angle of the electrons when evaluating AR‐XPS data of macroscopic rough surfaces. The topography of the sample surface is supposed to be recorded by atomic force microscopy and/or optical microscopy. The emitted photoelectrons are simulated based on an extension of the Beer–Lambert law that includes the shadowing, the current local emission angle, and the geometrical instrument setup. The obtained angle‐resolved XPS spectra are optimized in accordance with experimental ones via a self‐consistent minimization algorithm that also allows one to determine the layer thicknesses of the corrugated sample. In order to validate the proposed numerical scheme, the simulation program simulation of electron spectra for surface analysis is used. An additional analysis is then performed considering only experimental data. The numerical scheme gives good agreement in simulation–simulation as well as simulation–experiment comparisons and permits a comprehensible interpretation of the measured data. Copyright © 2014 John Wiley & Sons, Ltd.     

Revealing the Cell Entry Dynamic Mechanism of Single Rabies Virus Particle

The rabies virus is a neurotropic virus that causes fatal diseases in humans and animals. Although studying the interactions between a single rabies virus and the cell membrane is necessary for understanding the pathogenesis, the internalization dynamic mechanism of single rabies virus in living cells remains largely elusive. Here, we utilized a novel force tracing technique based on atomic force microscopy(AFM) to record the process of single viral entry into host cell. We revealed that the force of the rabies virus internalization distributed at (65±25) pN, and the time was identified by two peaks with spacings of (237.2±59.1) and (790.3±134.4) ms with the corresponding speed of 0.12 and 0.04 μm/s, respectively. Our results provide insight into the effects of viral shape during the endocytosis process. This report will be meaningful for understanding the dynamic mechanism of rabies virus early infection.     

Metal ion-induced H-aggregation of a water-soluble anionic dye Congo red (CR) in Langmuir–Blodgett (LB) film

Present communication reports the preparation of Langmuir monolayer of water-soluble anionic dye Congo red (CR) by allowing it to adsorb from the aqueous subphase onto the preformed Langmuir monolayer of anionic stearic acid using divalent metal cations Mg²⁺ as mediator. Isotherm and compressibility studies of SA-Mg-CR hybrid monolayer gave valuable information about the molecular organisation in the Langmuir monolayer. Absorption spectroscopic studies revealed the formation of H-aggregates in the hybrid Langmuir–Blodgett (LB) films fabricated at lower salt concentration in the subphase. Atomic Force Microscopic image gave visual evidence of distinct nanocrystalline domains in the LB monolayer film.