Analysis and Compensation of Polarization Mode Dispersion in Single Channel,WDM and 32-channel DWDM Fiber Optic System

One of the most serious impairments which limit the data rate in long distance and high speed transmission systems is Polarization Mode Dispersion (PMD). PMD is negligible when data rate is low (i.e. in Mb/s or few Gb/s) but it will affect the high data rate transmission systems (10^s of Gb/s, Tb/s etc.), as the pulse broadening severely distorts the signal during transmission. Thus it is necessary to compensate the PMD in both single and multichannel fiber optic transmission system due to increase in the traffic demand. This paper deals with a Deterministic Differential Group Delay (DDGD) method to compensate the PMD in single channel, by delaying the fast polarization component and wavelength independent Polarization Maintaining Fiber (PMF) method for multichannel PMD compensation. The DDGD method efficiently compensates the PMD upto 45 ps in single channel 40 Gb/s transmission systems. The State of Polarization (SOP) before and after the PMD and after compensation is analyzed by means of Poincare Sphere. By using PM Fiber method, simultaneous and effective compensation of PMD in multichannel system is achieved. Here, the simulation has been carried out for 4-channel (40 Gb/s), 8-channel (80 Gb/s), 16-channel (160 Gb/s) WDM systems and 32-channel (320 Gb/s) DWDM fiber optic system with each channel having the data rate of 10 Gb/s and the results of PMD compensation for all the channels are analyzed. It is seen that the PMD compensation is achieved upto 90 ps 87 ps, 84 ps and 80 ps in 4-channel, 8-channel, 16-channel WDM systems and 32-channel DWDM systems respectively. As very high data rate of 100 Gb/s and above are in practice now-a-days, compensation of PMD is enhanced to 1.6 Tb/s (16 × 100 Gb/s) data rate for 16-channel by PMF method and 74 ps of broadening is compensated effectively.