Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

超稳定TO-8型压力传感器在气体导热系数测定实验中的应用

介绍了TO-8型压力传感器的性能及电源电路.以气体导热系数测定实验为例,用TO-8型压力传感器制成的测压装置代替旋转式麦氏真空计,利用可调针孔式放气阀对真空气压进行连续调节,实现了对测试系统真空度的实时监测.     

偏振小孔干涉仪

偏振小孔干涉仪是一种可实用的新型干涉仪。它综合小孔衍射技术、偏振技术和共光路设计为一体,具有条纹对比度可调、抗干扰能力强和非接触检验等优点,可广泛用于各种光学元件及其胶合层的检验。目测精度达1/10λ,计算机条纹处理精度可调。     

Spatial structure and energy spectrum of ion beams studied with CN detectors within a small PF device

The paper reports the application of Solid-State Nuclear Track Detectors to study the pulsed plasma-ion streams emitted from plasma-focus (PF) type discharges, which were performed within a low-energy PACO device constructed at Instituto de Fisica Arroyo Seco. The PACO device was operated under static initial gas conditions or with dynamic gas puffing. Studies of the structure of the fast deuteron beams were carried out within an energy range from 80 keV to about 2 MeV. Studies of ion energy and an ion angular distribution were also performed. The measurements showed that the fast deuterons are emitted in many “narrow” micro-beams, as in other larger PF devices. The anisotropy of the deuteron angular distribution was explained by the stochastic character of the formation of local ion sources within the PF discharge column.     

厚针孔成像实时监测高能加速器束斑系统

为了方便地测量封有内靶的高能电子加速器束斑,采用了一种基于厚针孔成像技术的动态监测系统.本文给出了采用该系统在15MeV电子直线加速器束流打靶后的束斑测试结果,并简要介绍了成像原理和处理办法.通常的“三明治”方法需要冲洗X光胶片,整机调试时更要多次冲洗,效率较低.与之相比厚针孔成像方法可以实时成像,配合调机及时观察束斑的变化情况,使加速器参数调整有的放矢,提高了调机效率.     

高功率激光装置打靶精度测试技术

 多路激光打靶精度在惯性约束聚变实验中起着至关重要的作用,提出了基于X光针孔相机的激光打靶精度测试方法。根据显微镜读取的靶平面坐标系的靶孔中心坐标及打多孔靶后X光针孔相机所记录的靶孔中心坐标,建立靶平面坐标系和X光针孔相机坐标系之间的转换关系;通过打焦斑靶,建立焦斑模板,采用套模板的方法,读取X光针孔相机坐标系中焦斑中心坐标;由靶平面坐标系和X光针孔相机坐标系之间的转换关系,求出靶平面坐标系中焦斑中心坐标,计算得到激光打靶精度,分析打靶精度测试结果的不确定度,从而给出多路激光打靶精度测量技术和方法。     

针孔单光子发射计算机断层成像的空间分辨率研究

针孔单光子发射计算机断层(SPECT)成像的空间分辨率通常是根据Anger经验公式来进行估算,与实际测量存在较大偏差.本文通过对针孔成像的物理过程进行分析,提出了一个近似度更高的计算公式.利用精确的蒙特卡罗方法模拟针孔SPECT成像,采用OSEM(ordered subsets expectation maximization)算法对投影数据进行图像重建,并与模具实验进行比较,验证了理论公式的适用性.同时还讨论了体素尺寸、几何映射获取投影矩阵以及探测器尺寸与成像物体尺寸比值对断层图像空间分辨率的影响.实验结果显示,该理论公式所估算的空间分辨率比实验值平均偏小约10%,而Anger经验公式所估算的空间分辨率比实验值平均偏大约60%.因此,该理论公式能更好地估算针孔SPECT成像的空间分辨率,可为针孔SPECT系统的设计和使用提供有价值的参考.     

高功率固体激光器锥形空间滤波孔应用

锥形空间滤波孔是一种应用于高功率固体激光装置空间滤波的新型结构滤波小孔,其内部光滑的锥形结构可以有效滤除光束中的高频成分且避免等离子堵孔现象的发生。根据神光-Ⅲ主机装置结构特点,设计并加工了适用于主机装置的锥形空间滤波小孔,并开展了应用实验研究。通过与传统的平面结构滤波小孔对比可以看出,锥形小孔有效地避免了等离子体度堵孔现象,在与光束波前补偿技术配合使用条件下,保证光束顺利过孔,并成功实现了基频光7988 J的满能量输出。     

The beam-based calibration of an X-ray pinhole camera at SSRF

A pinhole camera for imaging X-ray synchrotron radiation from a dipole magnet is now in operation at the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. The electron beam size is derived by unfolding the radiation image and the point spread function (PSF) with deconvolution techniques. The performance of the pinhole is determined by the accuracy of the PSF measurement. This article will focus on a beam-based calibration scheme to measure the PSF system by varying the beam images with different quadrupole settings and fitting them with the corresponding theoretical beam sizes. Applying this method at SSRF, the PSF value of the pinhole is revised from 37 to 44 μm. The deviation in beam size between the theoretical value and the measured value is minimized to 4% after calibration. This optimization allows us to observe the horizontal disturbance due to injection down to as small as 0.5 μm.     

基于修正平行投影法的飞行姿态测量

摄影系统的成像满足透视投影模型,使用平行投影法做飞行姿态交会存在模型误差。依据在目标成像的中轴线通过像面中心的时候,平行投影法和透视投影法有相同的成像特征这一事实,提出了一种无模型误差的修正平行投影法。在判读出目标图像中轴线的斜率K和截距L的情况下,假设摄影系统的高低角再旋转atan(L/K)度,使得旋转后图像的中轴线过像面的中心点。依据透视投影模型,计算出旋转后图像中轴线的斜率,再使用此斜率做平行投影交会。仿真结果表明,该方法可以很好的消除由平行投影模型带来的模型误差,为空间目标姿态交会提供了更精确的计算结果。