Separation of Photosynthetic Pigments by High-performance Liquid Chromatography: Comparison of Column Performance,Mobile Phase,and Temperature

High-performance liquid chromatography (HPLC) has been commonly used as method of separating and identifying photosynthetic pigments such as chlorophylls and carotenoids because of such advantages as speed, high resolution and sensitivity. In this technique, high separation relies largely on the type of column material. This study compared the efficiency of five reverse-phase columns, C8, C18, C18 monolithic, π-NAP, and cholester, for separation of photosynthetic pigments at several fixed conditions of mobile phase and temperature. This investigation also analysed the parameters of Δt_R and t_R ratio for selected pigments and resolution for structural isomers, such as α- and β-carotene. Among above columns tested, cholester column is suitable for separation of pigments not only for a broad range of polarity, but also for hydrophobic pigments in a simple mobile phase. This finding can help in the selection of column and HPLC parameters in separating photosynthetic pigments.     

Resonant Raman‐based cytochrome C biosensor as a tool for evaluating the oxidative properties of the diesel exhaust particulate matter

Air pollution mostly originating from car exhaust and industrial emissions is seriously endangering human health. The study of toxic effects of particulate matter (PM) is a subject of very active research that covers a broad field from biology to chemistry and technology. The main issue of these works is the understanding of the oxidative properties of PM. In this paper, we present a quantitative analytical method based on the resonance Raman spectroscopy of cytocrome c that can be used to monitor the oxidative reactions that may take place between biological samples and PM. Copyright © 2016 John Wiley & Sons, Ltd.     

Transport of airborne particulate matters originating from Mentougou, Beijing, China

In this study, a coupled regional air quality modeling system is applied to investigate the time spatial variations in airborne particulate matters （PM10）, originating from Mentougou to Beijing municipal area in the period of April 1-7, 2004, and the influences of complex terrain and meteorological conditions upon boundary layer structure and PM10 concentration distributions. An intercomparison of the performance with CALPUFF against the observed data is presented and an examination of scatter plots is provided. The statistics show that the correlation coefficient and STD between the modeled and observed data are 0.86 and 0.03, respectively. Analysis of model results illustrates that the pollutants emitted from Mentougou can be transported to Beijing municipal area along certain transport pathways, and PM10 concentration distributions show heterogeneity characteristics. Contributions of the Mentougou sources to the PM10 concentrations in Beijing municipal area are up to 0.1-15 μg/m^3.     

Influence of the Physical Nonlinearity of the Matrix on the Deformation of a Particulate Composite with Microdamageable Inclusions

The structural theory of short-term damage is generalized to particulate composites with nonlinearly elastic matrix and microdamageable inclusions. The basis for this generalization is the stochastic elasticity equations for a particulate composite with porous inclusions. Microvolumes of the material meet the Huber-Mises failure criterion. The damaged-microvolume balance equation and the equations relating macrostresses and macrostrains of a particulate composite with porous inclusions and physically nonlinear matrix constitute a closed-form system. This system describes the coupled processes of physically nonlinear deformation and microdamage. Algorithms for computing the microdamage-macrostrain relationships and deformation curves are proposed. Uniaxial tension curves are plotted for a particulate composite with linearly hardening matrix__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 3–11, April 2005.     

Short-term microdamage of a physically nonlinear particulate material under a combination of normal and tangential loads

The structural theory of short-term damage is generalized to the case where the undamaged components of a particulate composite deform nonlinearly under loads that induce a compound stress state. The basis for this generalization is the stochastic elasticity equations for a particulate composite with porous components whose skeletons deform nonlinearly. Damage in a microvolume of the material is assumed to occur in accordance with the Huber-Mises failure criterion. Balance equations for damaged microvolume are derived for the physically nonlinear materials of the components. Together with the macrostress-macrostrain relationship for a particulate composite with porous nonlinear components, they constitute a closed-form system of equations. This system describes the coupled processes of physically nonlinear deformation and microdamage. Algorithms for calculating the microdamage-macrostrain relationship and plotting stress-strain curves are proposed. Such curves are plotted for the case where the composite is subjected to a combination of normal and tangential loads, and microdamages occur in the linearly hardened matrix and do not in the linearly elastic inclusions. The stress-strain curves are examined depending on the volume fraction of inclusions and presence of tangential stresses __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 12, pp. 48–57, December, 2006.     

Methodology for Bioassay-Directed Fractionation Studies of Air Particulate Material and Other Complex Environmental Matrices

Abstract

A normal phase HPLC methodology using a semi-preparative polyaminocyano column in conjunction with a selection of short-term genotoxicity assays has been developed for bioassay-directed fractionation studies of complex environmental mixtures. To illustrate the effectiveness of this methodology, an organic extract prepared from respirable air particulate samples collected in Hamilton, Canada was separated into a non-polar aromatic fraction and a polar aromatic fraction using a combination of alumina and Sephadex LH20 chromatography. These fractions were evaluated for their genotoxic potential using the Salmonella/microsome (Ames) assay with six different strains of Salmonella.

The non-polar aromatic fraction was analyzed by normal phase HPLC and the eluent was collected in one-minute subfractions; these subtractions were bioassayed in three different Salmonella strains (YG1021 -S9, YG1024 -S9 and YG1029 +S9) to afford three different mutation profiles of this sample. Some subfractions which exhibited high mutagenic responses were subjected to further chemical analyses using GC/MS in order to identify those compounds responsible for the genotoxic responses. The nitroarene compounds 2-nitrofluoranthene, 1-nitropyrene and 2-nitropyrene and higher molecular weight polycyclic aromatic hydrocarbons such as benzo[a]pyrene and indeno[l,2,3-cd]pyrene were identified and quantified in some of the biologically active subfractions. The normal phase gradient conditions afforded very reproducible retention times for a series of polycyclic aromatic standards with a broad range of compound polarities. In addition, polycyclic aromatic hydrocarbons (PAH) were observed to elute from the normal phase HPLC column in a series of peaks; successive peaks contained PAH of increasing molecular weight while any individual peak was shown to contain PAH of the same molecular weight.     

煤粉物化特性对燃烧后灰颗粒物的影响

以三种煤粉在沉降炉中做燃烧实验,用Andersen粒子撞击器分离并捕集燃烧后的灰颗粒物,借助于压汞仪、扫描电镜及能谱、ICP-AES等对煤粉及分级颗粒物进行检测,研究煤粉物化特性对灰颗粒物的粒径分布、形貌、组成、痕量元素的富集等特性的影响。结果表明,煤粉孔结构、组分的赋存方式及含量等影响其破碎行为及组分迁移、转化的过程...     

Influence of particle size on the fracture toughness of a PP-based particulate composite

The main focus of this paper is a numerical investigation of the fracture behavior of a particulate composite (CaCO₃-PP). The composite is modeled as a three-phase continuum and simulated numerically on a microscale by using finite elements. The propagation of a microcrack in a matrix filled with rigid particles covered by an interphase is analyzed. The stress distribution is determined for a variety of particle sizes and material properties of the interphase. The final results, in agreement with experimental data, confirm that the microcrack behavior depends on particle sizes. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 45, No. 3, pp. 411-418, May-June, 2009.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

利用代谢组学研究大气细颗粒物的生殖毒性效应

大气细颗粒物(PM2.5)污染已成为严峻的环境问题,探究PM2.5的毒性效应和机理变得尤为重要.本研究利用基于液相色谱/质谱的代谢组学技术,分析经PM2.5悬混液气管滴注暴露后成年雄性大鼠睾丸代谢组的全局变化,采用偏最小二乘判别分析法和非参数检验进行统计分析.结果表明,PM2.5暴露组大鼠睾丸的油提和水提代谢指纹谱均可与对照组实现准确区分,表明PM2.5暴露对大鼠睾丸的整体代谢网络产生了显著影响,最终鉴定出56个差异代谢物.通路分析显示,PM2.5暴露会引起大鼠睾丸的氨基酸和核苷酸代谢紊乱、类固醇激素代谢失衡以及脂类代谢异常,而这些重要通路可能是PM2.5生殖毒性的关键分子事件.