Macromodeling of high-speed interconnects by positive interpolation of vertical segments

In this paper a novel macromodeling scheme is presented to model the per unit of length (p.u.l.) parameters of uniform transmission lines. In particular, it is focused on single on-chip interconnects, because their p.u.l. parameters are influenced by the presence of semiconductor (s) and as such exhibit a strong frequency-dependency, making the modeling process harder. Starting from a set of very accurate tabulated data samples, obtained by two-dimensional electromagnetic modeling, rational models for the four p.u.l. parameters are constructed. The novelty of the approach lies in the fact that the rational models are positive by construction and that a controllable accuracy is obtained. These models can then further be used to construct multivariate models, e.g., for variability analysis. Here, the novel scheme is applied to an on-chip inverted embedded microstrip line, of which the signal integrity behavior is assessed in both the frequency and the time domain, demonstrating the applicability of the macromodels.     

DNA G-四链体的结构完整性对催化性质的影响

DNA酶中的G-四链体-血红素(G4-hemin)DNA酶结构具有较高的设计性和化学稳定性,因此格外受研究者关注.G-平面作为辅酶因子hemin的结合位点,不仅提供大π平面与hemin结合,而且其平面上的G碱基还可以充当近端配位基团与hemin进行配位.因此,研究G-平面完整性在G4-DNA酶体系中的作用具有重要意义.本文设计了一系列含有空位的G4(G-vacancy,GV)及G-三链体,通过“鸟嘌呤类似物插入”策略实现G-平面完整性以及DNA酶催化活性的恢复.结果表明,末端G-平面完整性是G4-DNA酶具有催化活性的必要条件,且其能够充当近端配位基团与末端碱基协同激活G4-DNA酶.考虑到hemin会选择性地结合于G4的3’-端平面,本文以含有3’-端空位的G4以及G-三链体为模型进行DNA酶的构建.结果表明,相较于末端完整的G4-hemin DNA酶,末端不完整的G4结构所形成的DNA酶催化活性很低.为了进一步验证该平面完整性的重要性,本文提出了“鸟嘌呤衍生物插入”策略,即将鸟嘌呤衍生物(无环鸟苷和鸟苷)插入G-空位以恢复G-平面的完整性.通过圆二色光谱和紫外熔解实验,发现末端平面完整性的缺失会使圆二色特征峰信号和G4结构热稳定性下降,而鸟嘌呤碱基类似物的加入则可以使特征峰信号以及热稳定性得到一定程度的恢复,表明鸟嘌呤碱基类似物的加入确实使G-平面完整性得到恢复.与此同时,随着鸟嘌呤碱基类似物浓度的增加,G4-hemin DNA酶活性逐渐增强,最终恢复至与完整G4一样的活性.在以G-三链体为模型的实验中,本文通过另一条富G序列与G-三链体进行结合,形成复合的(3+1)型G4结构,最终实现了DNA酶活性的恢复.同时,在3’-G-平面末端增加了激活碱基(dA或dTC),结果表明,即使G-平面不完整,末端碱基依旧能够激活DNA酶,但酶活性整体弱于完整G4时的活性.同样,“鸟嘌呤衍生物插入”策略可以使酶活性得到恢复.本文系列实验充分说明了末端碱基可与G-平面形成协同作用,与hemin的铁中心共同形成六配位关系,加速催化中间体生成,进而增强催化活性.有趣的是,通过设计Holliday junction结构研究发现,“鸟嘌呤衍生物插入”策略仅适用于平行G4结构.G-空位的存在不仅降低了G4结构的稳定性,而且降低了其与hemin间的亲和力,二者均是造成G4-DNA酶催化能力下降的主要因素.总之,本文证明了3’-端G-平面的完整性是G4-DNA酶实现其催化能力必不可少的因素,对理解末端G-平面在G4-DNA酶中的作用具有重要的参考意义.     

Improving Vesicular Integrity and Antioxidant Activity of Novel Mixed Soy Lecithin-Based Liposomes Containing Squalene and Their Stability against UV Light

In order to improve the membrane lipophilicity and the affinity towards the environment of lipid bilayers, squalene (SQ) could be conjugated to phospholipids in the formation of liposomes. The effect of membrane composition and concentrations on the degradation of liposomes prepared via the extrusion method was investigated. Liposomes were prepared using a mixture of SQ, cholesterol (CH) and Tween80 (TW80). Based on the optimal conditions, liposome batches were prepared in the absence and presence of SQ. Their physicochemical and stability behavior were evaluated as a function of liposome constituent. From the optimization study, the liposomal formulation containing 5% (w/w) mixed soy lecithin (ML), 0.5% (w/w) SQ, 0.3% (w/w) CH and 0.75% (w/w) TW80 had optimal physicochemical properties and displayed a unilamellar structure. Liposome prepared using the optimal formulation had a low particle size (158.31 ± 2.96 nm) and acceptable %increase in the particle size (15.09% ± 3.76%) and %trolox equivalent antioxidant capacity (%TEAC) loss (35.69% ± 0.72%) against UV light treatment (280–320 nm) for 6 h. The interesting outcome of this research was the association of naturally occurring substance SQ for size reduction without the extra input of energy or mechanical procedures, and improvement of vesicle stability and antioxidant activity of ML-based liposome. This study also demonstrated that the presence of SQ in the membrane might increase the acyl chain dynamics and decrease the viscosity of the dispersion, thereby limiting long-term stability of the liposome.     

桩基完整性测试的非线性最小二乘优化方法

针对桩基检测中低应变反射波法存在的应力波被桩土吸收和散射而衰减问题,把包含桩土衰减系数和介质不连续界面反射系数的反射波方程转化为非线性最小二乘优化问题,并采用信赖域法进行求解。由于采用信赖域法并采用了Gauss-Newton方向定义信赖域二维子空间,具有较好的收敛速度。通过模型桩算例表明该方法是确实可行的。     

图的最小完整度

主要研究了图的完整度,并给出若干关于完整度的结果. 对于所有的顶点数和边数都给定的连通图类,如何确定该图类中完整度最小的图. 同时研究了对于顶点数和完整度都给定的连通图类,如何确定该图类中边数最多的图的问题. 这些结果为图的最小完整度的优化设计提供了理论和方法.     

Laying groundwork for an understanding of academic integrity in mathematics tasks

ABSTRACT

To date, the way that academic misconduct is manifested in undergraduate mathematics coursework has been unexamined in the literature, with the consequence that policy and preventive education can fail to address it appropriately. This paper describes the particular features of the responses expected in mathematical tasks and provides concrete examples of what lapses of integrity look like in this context. The intent is to lay groundwork for discussion and a response to this issue from within our discipline.     

Novel membrane-based sensor for online membrane integrity monitoring

A novel membrane-based sensor device for upstream membrane integrity monitoring has been developed and evaluated in this study. The sensor is based on relative trans-membrane pressures created by two membranes in series inside the sensor device that detects deposition from the sample stream onto the first of the sensor membranes. The sensor pressure signals can distinguish between intact or damaged membranes in the upstream membrane filtration process. Studies were conducted to evaluate both stabilities and sensitivities of the relative trans-membrane pressure monitoring technique. Sensitivity, based on the response times of the membrane sensor for particle detection, was determined for a range of operating conditions, membrane sandwich configurations, and particle concentrations in both simulated membrane failures and for actual pin-hole defects on a submerged MF membrane. The results showed that both sensitivities and stability strongly depended on membrane sandwich configurations (membrane characteristics) in the sensor, and mode of operation (pressurized or vacuum). The membrane sensor detected bentonite particles with a concentration of 0.3 mg/L (turbidity ∼0.3 NTU) in approximately 35 min in the vacuum mode. The sensor is reliable, sensitive and low cost. It has potential applications in decentralized systems or in multichannel monitoring of local conditions in a large plant. Possible applications of the membrane sensor for fouling monitoring are also discussed.     

Isotropic polynomial invariants of Hall tensor

The Hall tensor emerges from the study of the Hall effect, an important magnetic effect observed in electric conductors and semiconductors. The Hall tensor is third-order and three-dimensional, whose first two indices are skew-symmetric. This paper investigates the isotropic polynomial invariants of the Hall tensor by connecting it with a second-order tensor via the third-order Levi-Civita tensor. A minimal isotropic integrity basis with 10 invariants for the Hall tensor is proposed. Furthermore, it is proved that this minimal integrity basis is also an irreducible isotropic function basis of the Hall tensor.     

Scattering of guided waves by defective adhesive bonds in multilayer anisotropic plates

We introduce an analytic-numerical method to simulate the interaction between ultrasonic guided waves and defective adhesive bonds in multilayer structures. We replace the thin adhesive layer by equivalent continuous distribution of normal and transversal springs and locally reduce the corresponding spring constants to model localized defects. We then formulate the resulting scattering problem as a linear least squares problem and solve it accordingly. The developed formulation is easy to implement and equally well suited to treating anisotropic as well as isotropic constituent layers. We illustrate the application of the proposed method through the simulation of ultrasound inspection of a three-layer isotropic plate and a sixteen-layer anisotropic plate used in the aeronautical industry, indicating in the simulations the guided modes that will most strongly interact with interfacial defects and computing the scattering resulting from the interaction of these modes with localized defects. We believe that the proposed method will serve both to aid in the design of interface inspections and as a basis for solving inverse scattering problems.