Photoinduced Birefringence in Poly(Methyl Methacrylate) Polymeric Thin Films Doped with Di-Azo Sudan G

Photoinduced birefringence in poly(methyl methacrylate) (PMMA), polymeric thin films doped with di-azo Sudan G was investigated. A pump-probe method was used to study the dynamic behavior of the birefringence. The mechanism for the inducement of birefringence is discussed in terms of the photoisomerization of the di-azo Sudan G molecules. The results showed that the dynamic evolution of the photoinduced birefringence was such that the average birefringence increased, saturated, and then decreased with respect to the laser pump intensity. Also, an exponential-like relationship was observed between both the saturation and the isotropic states of the averaged transmitted probe beam (expressing the residual anisotropy) and the birefringence on one hand, and the intensity amplitudes of the pumping powers on the other hand.     

New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.     

级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

Lone-Pair Enhanced Birefringence in an Alkaline-Earth Metal Tin(II) Phosphate BaSn2(PO4)2

The first alkaline-earth metal tin(II) phosphate, BaSn₂(PO₄)₂, has been discovered, which consists of layered structures constructed from strictly alternating [SnO₃]⁴⁻ and [PO₄]³⁻ moieties. This compound is expected to have a large birefringence with Δn≈0.071 at 1064 nm, owing to the presence of stereochemically active lone pair metal cations.     

Direct interferometric measurement of streaming birefringence

The two refractive indices in the flow of a colloidal birefringent liquid are measured separately by means of a Mach-Zehnder interferometer. For a quantitative evaluation of the resulting interferograms it is not necessary to linearize the respective equations relating the refractive index distribution to the deformation velocity in the flow. Therefore it becomes possible to perform velocity measurements in the non-Newtonian flow range. An additional measurement of the mean flow rate enables one to determine the velocity field without the need of a calibration of the observed interference fringes.     

A model of nonlinear electrodynamics

A new model of nonlinear electrodynamics with two parameters is investigated. We also consider a model with one dimensional parameter. It was shown that the electric field of a point-like charge is not singular at the origin and there is the finiteness of the static electric energy of point-like charged particle. We obtain the canonical and symmetrical Belinfante energy–momentum tensors and dilatation currents. It is demonstrated that the dilatation symmetry and dual symmetry are broken in the models suggested. We have calculated the static electric energy of point-like particles.     

Orientational order parameter studies on 3.Om and 3O.Om liquid crystals

Orientational order parameter S is evaluated in the nematic phase of six liquid crystal compounds, N-(p-n-propyl benzylidene)-p-n-alkoxy anilines, 3.Om and N-(p-n-propyloxy benzylidene)-p-n-alkoxy anilines, 3O.Om compounds with m = 6, 7 and 8, using different methods. The techniques employed are S from birefringence δn, Haller's approximation from (1?T/T_c) ^β, effective geometry parameter α_g and Vuks’ scaling factor S_C. The values of S obtained using the above methods are compared with one another and with the results on a number of liquid crystals; the liquid crystals favor isotropic Vuks’ method.     

3D stress local nondestructive analysis in the middle plane of a plate

The Isodyne technique based on the scattered light scanning from a thin laser beam can be used to obtain the information inside the loaded object in the room temperature nondestructively, so it is a very powerful technique in 3D stress analysis. The problems are how to interpret the information and how to get sufficient information from the few interference fringe. Birefringence phase shift technique can distinguish the fringe orders automatically and enrich the information in 256 gray levels between maxim and minim light intensity. In the paper the Isodyne birefringence phase shift method with an oblique incidence and equilibrium equation is presented, by which the 3D stresses in the middle plane of a plate with U shape notch are separated successfully. The project supported by the National Natural Science Foundation of China under the Grant No. 1380345     

Simultaneous measurement of transient stress and flow birefringence in one-sided compression (biaxial extension) of a polymer melt

Summary Investigation of time dependent behaviour of a polystyrene melt is carried out with the aid of a new apparatus for biaxial extension. Use is made of the method of two impinging fluid streams guided by lubricated trumpet shaped metal walls. The flow birefringence is measured in the plane of symmetry and, at the same time, the force is measured which tends to separate the trumpets. The linear stress-optical relation turns out to be valid in this new flow geometry. An accurate value for the stress-optical coefficient can be determined from the relaxation experiments. The stress build-up as calculated from the optical measurements, is compared with the pertinent result of the theory of linear viscoelasticity. For the desired interconversion of dynamic moduli use is made of the approximation by Schwarzl and Struik. The steady state measurements are checked by the results of the non-linear model of Acierno et al.With 16 figures and 2 tables     

A tool for rapid quenching of elongated polymer melts

In this article, we present a device for rapid quenching of elongated polymer melts. The tool is an accessory to the uniaxial elongational rheometer RME of Meissner and Hostettler. It is intended to be used for microscopic and other investigations of stretched polymers. The device allows us to solidify a polymer melt by pouring liquid nitrogen on it and to cut it at the nearly same instant of time. Then the sample can be easily removed from the stretching apparatus. Solving the heat diffusion equation for a polymer melt, which is cooled by liquid nitrogen, we theoretically estimate the quenching time of this method. To demonstrate that this quenching procedure indeed rapidly cools a polymer melt, the stress birefringence of elongated and subsequently quenched polystyrene melts is measured and the stress-optical coefficient C is determined. The experimental value of the stress-optical coefficient is |C|= 4.65×10⁻⁹ Pa⁻¹, which agrees well with the data in literature. Using this tool for elongation experiments with the RME, polymer melts can be solidified in between approximately 0.2 and 2.0 s, depending on the thickness of the sample.