Binary salt of a palladium(II) complex with (phosphonomethyl)phosphonic (medronic) acid comprising `handbell‐like' [Pd{μ‐CH2(PO3)2}]3 units

The asymmetric unit of the title compound, dipotassium bis[hexaaquanickel(II)] tris(μ₂‐methylenediphosphonato)tripalladium(II) hexahydrate, K₂[Ni(H₂O)₆]₂[Pd₃{CH₂(PO₃)₂}₃]·6H₂O, consists of half a {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ anion [one Pd atom (4e) and a methylene C atom (4e) occupy positions on a twofold axis] in a rare `handbell‐like' arrangement, with K⁺ and [Ni(H₂O)₆]²⁺ cations to form the neutral complex, completed by three solvent water molecules. The {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ units exhibit close Pd...Pd separations of 3.0469 (4) Å and are packed via intermolecular C—H...Pd hydrogen bonds. The [KO₉] and [NiO₆] units are assembled into sheets coplanar with (011) and stacked along the [100] direction. Within these sheets there are [K₄Ni₄O₈] and [K₂Ni₂O₄] loops. Successive alternation of the sheets and [Pd{CH₂(PO₃)₂}]₃ units parallel to [001] produces the three‐dimensional packing, which is also supported by a dense network of hydrogen bonds involving the solvent water molecules.     

A new type of mixed anionic framework in microporous rubidium copper vanadyl(V) phosphate,Rb2Cu(VO2)2(PO4)2

In dirubidium copper bis[vanadyl(V)] bis(phosphate), Rb₂Cu(VO₂)₂(PO₄)₂, three different oxo complexes form an anionic framework. VO₅ polyhedra in a trigonal bipyramidal configuration and PO₄ tetrahedra share vertices to form eight‐membered rings, which lie in layers perpendicular to the a axis of the monoclinic unit cell. Cu atoms at centres of symmetry have square‐planar coordination and link these layers along [100] to form a three‐dimensional anionic framework, viz. [Cu(VO₂)₂(PO₄)₂]_∞²⁻. Intersecting channels in the [100], [001] and [011] directions contain Rb⁺ cations. Topological relations between this new structure type and the crystal structures of A(VO₂)(PO₄) (A = Ba, Sr or Pb) and BaCrF₂LiF₄ are discussed.     

ABi2(IO3)2F5 (A=K,Rb, and Cs): A Combination of Halide and Oxide Anionic Units To Create a Large Second‐Harmonic Generation Response with a Wide Bandgap

A family of nonlinear optical materials that contain the halide, oxide, and oxyhalide polar units simultaneously in a single structure, namely ABi₂(IO₃)₂F₅ (A=K ( 1 ), Rb ( 2 ), and Cs ( 3 )), have been designed and synthesized. They crystallize in the same polar space group (P 2₁) with a two‐dimensional double‐layered framework constructed by [BiF₅]²⁻ and [BiO₂F₄]⁵⁻ units connected to each other by four F atoms, in which two [IO₃]⁻ groups are linked to [BiO₂F₄]⁵⁻ unit on the same side. A hanging Bi−F bond of [BiF₅]²⁻ unit is located on the other side via ionic interaction with the layer‐inserted alkali metal ions to form three‐dimensional structure. The well‐ordered alignments of these polar units lead to a very strong second‐harmonic generation response of 12 ( 1 ), 9.5 ( 2 ), and 7.5 ( 3 ) times larger than that of potassium dihydrogen phosphate under 1064 nm laser radiation. All of them exhibited a wide energy bandgap over 3.75 eV, suggesting that they will have a high laser damage threshold.     

(NH4)Bi2(IO3)2F5: An Unusual Ammonium-Containing Metal Iodate Fluoride Showing Strong Second Harmonic Generation Response and Thermochromic Behavior

An ammonium-containing metal iodate fluoride compound, (NH₄)Bi₂(IO₃)₂F₅, featuring a two-dimensional double-layered framework constructed by [BiO₂F₅]⁶⁻ and [BiO₄F₄]⁹⁻ polyhedra, as well as [IO₃]⁻ groups, was successfully synthesized. The well-ordered alignment of these SHG-active units leads to an extraordinary strong SHG response of 9.2 times that of KDP. Moreover, this compound possesses a large birefringence (Δn=0.0690 at 589.3 nm), a wide energy band gap (E_g=3.88 eV), and a high laser damage threshold (LDT; 40.2×AgGaS₂). In particular, thermochromic behavior was observed for the first time in this type of compound. Such multifunctional crystals will expand the application of nonlinear optical materials.     

Dilead(II) trimercury(II) tetraoxide chromate(VI), Pb2(Hg3O4)(CrO4)

Pb₂(Hg₃O₄)(CrO₄) consists of [CrO₄]²⁻ tetra­hedra, linear O—Hg—O dumbbells and divalent Pb atoms in [3+5]‐coordination. The HgO₂ dumbbells are condensed into [Hg₃O₄]²⁻ units and can be regarded as a section of the HgO structure. The [Hg₃O₄]²⁻ complex anions are connected by inter­stitial Pb²⁺ ions, while the [CrO₄]²⁻ tetra­hedra are isolated.     

ABi2(IO3)2F5 (A=K,Rb, and Cs): A Combination of Halide and Oxide Anionic Units To Create a Large Second‐Harmonic Generation Response with a Wide Bandgap

A family of nonlinear optical materials that contain the halide, oxide, and oxyhalide polar units simultaneously in a single structure, namely ABi₂(IO₃)₂F₅ (A=K ( 1 ), Rb ( 2 ), and Cs ( 3 )), have been designed and synthesized. They crystallize in the same polar space group (P 2₁) with a two‐dimensional double‐layered framework constructed by [BiF₅]²⁻ and [BiO₂F₄]⁵⁻ units connected to each other by four F atoms, in which two [IO₃]⁻ groups are linked to [BiO₂F₄]⁵⁻ unit on the same side. A hanging Bi−F bond of [BiF₅]²⁻ unit is located on the other side via ionic interaction with the layer‐inserted alkali metal ions to form three‐dimensional structure. The well‐ordered alignments of these polar units lead to a very strong second‐harmonic generation response of 12 ( 1 ), 9.5 ( 2 ), and 7.5 ( 3 ) times larger than that of potassium dihydrogen phosphate under 1064 nm laser radiation. All of them exhibited a wide energy bandgap over 3.75 eV, suggesting that they will have a high laser damage threshold.     

Hydrate isomerism in [Cu(en)2(H2O)1.935]2[Fe(CN)6]·4H2O

The title compound, bis[di­aqua­bis­(ethyl­enedi­amine‐κ²N,N′)copper(II)­] hexa­cyano­iron(II) tetrahydrate, [Cu(C₂H₈N₂)₂(H₂O)_1.935]₂[Fe(CN)₆]·4H₂O, was crystallized from an aqueous reaction mixture initially containing CuSO₄, K₃[Fe(CN)₆] and ethyl­enedi­amine (en) in a 3:2:6 molar ratio. Its structure is ionic and is built up of two crystallographically different cations, viz. [Cu(en)₂(H₂O)₂]²⁺ and [Cu(en)₂(H₂O)_1.87]²⁺, there being a deficiency of aqua ligands in the latter, [Fe(CN)₆]⁴⁻ anions and disordered solvent water mol­ecules. All the metal atoms lie on centres of inversion. The Cu atom is octahedrally coordinated by two chelate‐bonded en mol­ecules [mean Cu—N = 2.016 (2) Å] in the equatorial plane, and by axial aqua ligands, showing very long distances due to the Jahn–Teller effect [mean Cu—O = 2.611 (2) Å]. In one of the cations, significant underoccupation of the O‐atom site is observed, correlated with the appearance of a non‐coordinated water mol­ecule. This is interpreted as the partial contribution of a hydrate isomer. The [Fe(CN)₆]⁴⁻ anions form quite regular octahedra, with a mean Fe—C distance of 1.913 (2) Å. The dominant intermolecular interactions are cation–anion O—H⋯N hydrogen bonds and these inter­actions form layers parallel to (001).     

K6[Fe8.27(HPO3)12]: a new mixed‐valence iron phosphite

The title compound, hexapotassium octairon(II,III) dodecaphosphonate, exhibiting a two‐dimensional structure, is a new mixed alkali/3d metal phosphite. It crystallizes in the space group Rm, with two crystallographically independent Fe atoms occupying sites of m (Fe1) and 3m (Fe2) symmetry. The Fe2 site is fully occupied, whereas the Fe1 site presents an occupancy factor of 0.757 (3). The three independent O atoms, one of which is disordered, are situated on a mirror and all other atoms are located on special positions with 3m symmetry. Layers of formula [Fe₃(HPO₃)₄]²⁻ are observed in the structure, formed by linear Fe₃O₁₂ trimer units, which contain face‐sharing FeO₆ octahedra interconnected by (HPO₃)²⁻ phosphite oxoanions. The partial occupancy of the Fe1 site might be described by the formation of two [Fe(HPO₃)₂]⁻ layers derived from the [Fe₃(HPO₃)₄]²⁻ layer when the Fe1 atom is absent. Fe²⁺ is localized at the Fe1 and Fe2 sites of the [Fe₃(HPO₃)₄]²⁻ sheets, whereas Fe³⁺ is found at the Fe2 sites of the [Fe(HPO₃)₂]⁻ sheets, according to bond‐valence calculations. The K⁺ cations are located in the interlayer spaces, between the [Fe₃(HPO₃)₄]²⁻ layers, and between the [Fe₃(HPO₃)₄]²⁻ and [Fe(HPO₃)₂]⁻ layers.     

A novel heterometallic dinuclear compound: rac‐pentaaqua‐1κ5O‐(μ‐2‐sulfidoacetato‐1:2κ3O:O′,S)bis(2‐sulfidoacetato‐2κ2O,S)manganese(II)tin(IV)

The title racemic heterometallic dinuclear compound, [MnSn(C₂H₂O₂S)₃(H₂O)₅], (I), contains one main group Sn^IV metal centre and one transition metal Mn^II centre, and, by design, links the Mn^II centre to the building unit of the (Δ/Λ) [SnL₃]²⁻ complex anion (L is the 2‐sulfidoacetate dianion). In this cluster, the Sn^IV centre of the (Δ/Λ) [SnL₃]²⁻ unit is coordinated by three O atoms and three S atoms from three L ligands to form an [SnO₃S₃] octahedral coordination environment. The Mn^II centre is in an [MnO₆] octahedral coordination environment, with five O atoms from five water molecules and the sixth from the μ₂‐L ligand of the (Δ/Λ) [SnL₃]²⁻ unit. Between adjacent dinuclear molecules, there are many hydrogen‐bond interactions of O—H...O, O—H...S, C—H...O and C—H...S types. Of these, eight pairs of O—H...O hydrogen bonds fuse all the dinuclear molecules into two‐dimensional supramolecular sheets along the bc plane. Adjacent supramolecular sheets are further connected through O—H...S hydrogen bonds to give a three‐dimensional supramolecular network.     

Rational Synthesis,Structures and Properties of the Ionic Liquid Binary Iodine-Bromine Octahalide Series [InBr8−n]2− (n=0, 2, 3, 4)

A series of octanuclear iodine-bromine interhalides [I_nBr_8−n]²⁻ (n=0, 2, 3, 4) were prepared systematically in two steps. Firstly, addition of a dihalogen (Br₂ or IBr) to the triaminocyclopropenium bromide salt [C₃(NEt₂)₃]Br forms the corresponding trihalide salt with Br₃⁻ or IBr₂⁻ anions, respectively. Secondly, addition to Br₃⁻ of half an equivalent of Br₂ gives the octabromine polyhalide [Br₈]²⁻, whereas addition to IBr₂⁻ of half an equivalent of Br₂, IBr or I₂ gives the corresponding interhalides: [I₂Br₆]²⁻, [I₃Br₅]²⁻, and [I₄Br₄]²⁻, respectively. The four octahalides were characterized by X-ray crystallography, computational studies, Raman and Far-IR spectroscopies, as well as by TGA and melting point. All of the salts were found to be ionic liquids.     

Cd2Cu(PO4)2

During an investigation of the insufficiently known system M1O–M2O–X₂O₅–H₂O (M1 = Cd²⁺, Sr²⁺ and Ba²⁺; M2 = Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺ and Mg²⁺; X = P⁵⁺, As⁵⁺ and V⁵⁺), single crystals of the novel compound dicadmium copper(II) bis[phosphate(V)], Cd₂Cu(PO₄)₂, were obtained. This compound belongs to a small group of compounds adopting a Cu₃(PO₄)₂‐type structure and having the general formula M1₂M2(XO₄)₂ (M1/M2 = Cd²⁺, Cu²⁺, Mg²⁺ and Zn²⁺; X = As⁵⁺, P⁵⁺ and V⁵⁺). The crystal structure is characterized by the interconnection of infinite [Cu(PO₄)₂]_n chains and [Cd₂O₁₀]_n double chains, both extending along the a axis. Exceptional characteristics of this structure are its novel chemical composition and the occurrence of double chains of CdO₆ polyhedra that were not found in related structures. In contrast to the isomorphous compounds, where the M1 cations are coordinated by five O atoms, the Cd atom is coordinated by six. The dissimilarity in the geometry of M1 coordination between Cd₂Cu(PO₄)₂ and the isomorphous compounds is mostly due to the larger ionic radius of the Cd cation in comparison with the Cu, Mg and Zn cations. Sharing a common edge, two CdO₆ polyhedra form Cd₂O₁₀ dimers. Each such dimer is bonded to another dimer sharing common vertices, forming [Cd₂O₁₀]_n double chains in the [100] direction. The Cu atoms, located on an inversion centre (site symmetry ), form isolated CuO₄ squares interconnected by PO₄ tetrahedra, forming [Cu(PO₄)₂]_n chains similar to those found in related structures. Conversely, the [Cd₂O₁₀]_n double chains, which were not found in related structures, are an exclusive feature of this structure.     

Mercury(II) polyphosphate,Hg(PO3)2

Single crystals of mercury(II) polyphosphate, Hg(PO₃)₂, were prepared from HgO in an acidic polyphosphate melt. The structure is isotypic with α‐Cd(PO₃)₂ and comprises infinite polyphosphate chains with a period of four phosphate units. Chains of the form ¹_∞[PO₃^?] are linked by Hg²⁺ to form a three‐dimensional network. The Hg atom is located at the centre of a distorted octahedron of O atoms with distances 2.173 (5) < (Hg—O)_mean < 2.503 (6) Å. The [HgO₆] polyhedra form zigzag‐like chains of the form ¹_∞[HgO₂O_4/2] parallel to the c axis.     

Origin of Selectivity of a Triazinyl Ligand for Americium(III) over Neodymium(III)

[M(EtBTP)₃][BPh₄]₃ ⋅ 3 CH₃CN (M=Nd, Am; EtBTP=2,6-bis(5,6-diethyl-1,2,4-triazin-3-yl)pyridine) have been synthesized from reactions of MCl₃ ⋅ n H₂O with EtBTP in acetonitrile followed by anion metathesis. Structural analysis reveals that these compounds contain M³⁺ cations bound by tridentate EtBTP ligands to create a tricapped trigonal prismatic geometry around the metal centers. Collection of high-resolution, single-crystal X-ray diffraction data also allowed reduction in bond lengths esd's, such that a slight contraction of Δ=0.0158(18) Å in the Am−N versus Nd−N bond lengths was observed, even though these cations ostensibly have matching ionic radii. Theoretical evaluation revealed enhanced metal–ligand bonding through back donation in the [Am(EtBTP)₃]³⁺ complex that is absent in [Nd(EtBTP)₃]³⁺.     

Influence of the chloride counterion on the redox reactivity of tetraammineplatinum(II) cation with octacyanotungstate(V) anion: Crystal structure of [Pt(NH3)4]2[W(CN)8]

The redox reaction between [Pt(NH₃)₄]²⁺ and [W(CN)₈]³⁻ in the presence of Cl⁻ anions in aqueous solution affords single crystals of [Pt^II(NH₃)₄]₂[W^IV(CN)₈] and [Pt^IV(NH₃)₄Cl₂]Cl₂. Trapped cyano ligands of [W(CN)₈]⁴⁻ rectangular antiprisms of D₂ point symmetry between parallel Pt(II) square planes show that the inner-sphere redox pathway is prohibited. The presence of Cl⁻ counterions enables the formation of [Pt(NH₃)₄Cl₂]Cl₂ as the product of the rare outer-sphere pathway of the oxidation of Pt(II) by [W(CN)₈]³⁻.     

Synthese und Kristallstruktur von Te3O3(PO4)2, einer Verbindung mit fünffach koordiniertem Tellur(IV)

Synthesis and Crystal Structure of Te₃O₃(PO₄)₂, a Compound with 5‐fold Coordinate Tellurium(IV) Polycrystalline Te₃O₃(PO₄)₂ is formed during controlled dehydration of (Te₂O₃)(HPO₄) with (Te₈O₁₀)(PO₄)₄ as an intermediate product. Colourless single crystals were prepared by heating stoichiometric amounts of the binary oxides P₂O₅ und TeO₂ in closed silica glass ampoules at 590 °C for 8 hours. The crystal structure (P2₁/c, Z = 4, α = 12.375(2), b = 7.317(1), c = 9.834(1)Å, β = 98.04(1)°, 1939 structure factors, 146 parameters, R[F² > 2σ(F²)] = 0.0187, wR2(F² all) = 0.0367) was determined from four‐circle diffractometer data and consists of [TeO₅] polyhedra und PO₄ tetrahedra as the main building units. The framework structure is made up of cationic zigzag‐chains of composition [Te₂O₃]²⁺ which extend parallel to [001] and anionic [Te(PO₄)₂]^2— units linked laterally to these chains. This leads to the formation of [Te₂O₃][Te(PO₄)₂] layers parallel to the bc plane which are interconnected via weak Te‐O bonds.     

A Terphenyl Supported Dioxophosphorane Dimer: the Light Congener of Lawesson's and Woollins’ Reagents

Thermolysis of a 1,3-dioxa-2-phospholane supported by the terphenyl ligand Ar^iPr4 (Ar^iPr4=[C₆H₃-2,6-(C₆H₃-2,6-iPr₂)]) at 150 °C gives [Ar^iPr4PO₂]₂ via loss of ethene. [Ar^iPr4PO₂]₂ was characterised by X-ray crystallography and NMR spectroscopy; it contains a 4-membered P−O−P−O ring and is the isostructural oxygen analogue of Lawesson's and Woollins’ reagents. The dimeric structure of [Ar^iPr4PO₂]₂ was found to persist in solution through VT NMR spectroscopy and DOSY, supported by DFT calculations. The addition of DMAP to the 1,3-dioxa-2-phospholane facilitates the loss of ethene to give Ar^iPr4(DMAP)PO₂ after days at room temperature, with this product also characterised by X-ray crystallography and NMR spectroscopy. Replacement of the DMAP with pyridine induces ethene loss from the 1,3-dioxa-2-phospholane to provide gram-scale samples of [Ar^iPr4PO₂]₂ in 75 % yield in 2 days at only 100 °C.     

Tricaesium tris(oxalato‐κ2O1,O2)chromate(III) dihydrate

The title compound, Cs₃[Cr(C₂O₄)₃]·2H₂O, has been synthesized for the first time and the spatial arrangement of the cations and anions is compared with those of the other members of the alkali metal series. The structure is built up of alternating layers of either the d or l enantiomers of [Cr(oxalate)₃]³⁻. Of note is that the distribution of the [Cr(oxalate)₃]³⁻ enantiomers in the Li⁺, K⁺ and Rb⁺ tris(oxalato)chromates differs from those of the Na⁺ and Cs⁺ tris(oxalato)chromates, and also differs within the corresponding BEDT‐TTF [bis(ethylenedithio)tetrathiafulvalene] conducting salts. The use of tris(oxalato)chromate anions in the crystal engineering of BEDT‐TTF salts is discussed, wherein the salts can be paramagnetic superconductors, semiconductors or metallic proton conductors, depending on whether the counter‐cation is NH₄⁺, H₃O⁺, Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺. These materials can also be superconducting or semiconducting, depending on the spatial distribution of the d and l enantiomers of [Cr(oxalate)₃]³⁻.     

The Sulfur Rich Fluorothiophosphate Dianions [S5P2F2]2− and [S3PF]2− : Cluster and Chelation Control of P-S Heterolysis

The sulfur rich difluoropentathiodiphosphate dianion [S₅P₂F₂]²⁻, from fluoride addition to P₄S₁₀, has a somewhat checkered history and proves to be the main product of the reaction in acetonitrile. Its optimized synthesis, and structural characterization, as either a tetraphenylphosphonium or a tetrapropylammonium salt, [NⁿPr₄]₂[S₅P₂F₂] allows for the first coordination chemistry for this dianion. Reactions of [S₅P₂F₂]²⁻ with d¹⁰ metal ions of zinc(II), and cadmium(II), and d⁹ copper(II) resulted in a surprising diverse array of binding modes and structural motifs. In addition to the simple bis-chelate coordination of [S₅P₂F₂]²⁻ with zinc, cleavage of the P−S bond resulted in complexes with the unusual [S₃PF]²⁻ fluorotrithiophosphate dianion. This was observed in two cluster complexes: a trinuclear cadmium complex with mixed [S₅P₂F₂]²⁻/[S₃PF]²⁻ ligands, [Cd₃(S₅P₂F₂)₃(S₃PF)₂]⁴⁻ as well as an octanuclear copper cluster, [Cu₈(S₃PF)₆]⁴⁻ which form rapidly at room temperature. These new metal/sulfur/ligand clusters are of relevance to understanding multimetal binding to metallothionines, and to potential capping strategies for the condensed nanoparticulate cadmium chalcogenide semiconductors CdS and CdSe.     

ASb2(SO4)2(PO4) (A = H3O+, K,Rb): Layered Structure Containing Ordered Sulfate and Phosphate Anions

Three compounds ASb₂(SO₄)₂(PO₄) (A = H₃O⁺, K, Rb) were obtained from the reactions of Sb₂O₃, A₂CO₃ (A = Li, Rb) or K₂SO₄ and NH₄H₂PO₄ in H₂SO₄ (98 %) at 220–250 °C. Their structures were determined by single‐crystal X‐ray diffraction. All compounds crystallize in the triclinic space group P$\bar{1}$ (no.2) and are isostructural. The crystal structures consist of two‐dimensional ²_∞[Sb₂(SO₄)₂(PO₄)]^– anionic layers and alkali cations, which are located between anionic layers. The anionic layers are composed of [SbO₄] ψ‐trigonal bipyramids, [SbO₅] ψ octahedra, [SO₄] tetrahedra, and [PO₄] tetrahedra. All compounds are characterized by solid state UV/Vis/NIR diffuse reflectance spectra, FT‐IR spectroscopy, and Raman spectroscopy.     

Metal-Stabilized [B8H8]2− Derivatives with Dodecahedral Structure in the Solid and Solution States: [(Cp2MBH3)2B8H6] (Cp=η5-C5H5; M=Zr (1-Zr) and Hf (1-Hf)).

Despite the synthesis and structural characterization of closo-hydroborate dianions, [B_nH_n]²⁻ (n=6–12) more than 50 years ago, some ambiguity remains about the structure of [B₈H₈]²⁻. Although the solid-state structure of [B₈H₈]²⁻ was established by single-crystal X-ray studies in 1969, fast rearrangements in solution at accessible temperatures prevented its detailed characterization. We therefore stabilized a derivative of [B₈H₈]²⁻ by using Cp₂MBH₃ and structurally characterized two new octaborane analogues, [(Cp₂MBH₃)₂B₈H₆] (Cp=η⁵-C₅H₅; M=Zr ( 1-Zr ) and Hf ( 1-Hf )), so that the dynamics of the B₈ skeleton were arrested. The solid-state structures of both 1-Zr and 1-Hf comprise a dodecahedron core protected by {Cp₂MBH₃} moieties on both sides of the cluster. Spectroscopic characterization (¹¹B NMR) validates the intactness of the B₈ dodecahedron core in solution as well. Theoretical calculations establish that the two exo-{Cp₂MBH₃} fragments provide structural and electronic structural stability to the B₈ core and its intact dodecahedral dianionic nature. Furthermore, we propose isodesmic equations for the formation of higher analogues of the B_n core (n>8) guarded by different group 4 transition metals. Our analysis suggests that, as we move to higher polyhedra (n>10), the formation becomes unfavourable irrespective of metal.