Temperature dependence of GaSb and AlGaSb solar cells

Sb-based alloys offer great potential for photovoltaic and thermophotovoltaic applications. In this paper, we study the performance of Al_xGa_1-xSb (x = 0, 0.15, and 0.50) single-junction solar cells over a temperature range of 25–250 °C. The dark current-voltage, one-sun current-voltage, and external quantum efficiency measurements were acquired at different temperatures. Correlations between experimental and numerical results are made to draw conclusions about the thermal behavior of the cells. It is shown that, while the bandgaps decrease linearly with temperature leading to the reduction of open-circuit voltages, the short-circuit current densities decrease with non-linear trends. The temperature-dependent dark current densities were extracted by fitting the dark current-voltage curves to single- and double-diode models to give an insight into the effect of intrinsic carrier concentration (n_i) on the cell performance. We find that the n_i has a significant impact on temperature-dependent cell performance. These findings could lay a groundwork for the future Sb-based photovoltaic systems that operate at high temperatures.     

Variations of the elastic constants of InSb near the covalent-metallic transition

Abstract

The pulse-echo-overlap method was used to measure the longitudinal and transverse wave velocities in single-crystal (100) and (111) samples of InSb up to 3 GPa at room temperature. The peculiar variations of the elastic constants were observed near the covalent-metallic transition.     

Metal-nonmetal transition in the sphalerite-type solid solution [ZnSnSb2]1−x[2(InSb)]x

Samples of the solid solution [ZnSnSb₂]_1−x[2(InSb)]_x have been prepared over the whole range of composition by tin flux synthesis. The lattice parameter of the sphalerite-type average structure varies linearly between that of the end members ZnSnSb₂ and InSb, a=6.2849(2) and 6.4776(15), respectively. Electron diffraction shows different kinds of structured diffuse scattering for Zn and In rich samples, respectively. The former is attributed to compositional short range ordering, the latter to thermally excited phonon modes. A metal-nonmetal transition takes place between the compositions x=0.8 and x=0.9.     

Structural and physical properties of Mg3−xZnxSb2 (x=0-1.34)

The Mg_3−xZn_xSb₂ phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg_3−xZn_xSb₂ phases crystallize in the same P3¯m1 space group as the parent Mg₃Sb₂ phase. The Mg_3−xZn_xSb₂ structure is different from the other substituted structures of Mg₃Sb₂, such as (Ca, Sr, Ba) Mg₂Sb₂ or Mg_5.23Sm_0.77Sb₄, in a way that in Mg_3−xZn_xSb₂ the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg₃Sb₂ and Mg_2.36Zn_0.64Sb₂, was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg₃Sb₂ which is a semiconductor, Mg_2.36Zn_0.64Sb₂ is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg_2.36Zn_0.64Sb₂ is still poor and it is mostly due to its large electrical resistivity.     

Quadrupole interactions at 57Fe and 119Sn in 3d-metal antimonides

3d-metal antimonides: Fe_1+x Sb, N_+x Sb, Co_+x Sb and the (Ni_1?y Fe _y )Sb solid solution have been studied by the Mössbauer effect method at ⁵⁷Fe and ¹¹⁹Sn. It was found that the quadrupole interactions at the Fe and Sn nucleus in 3d-metal antimonides are very sensitive to the filling of different crystallographic sites with metal atoms. The metal atoms in trigonal-bipyramidal sites have a strong effect on the quadrupole splitting of ¹¹⁹Sn. They are nearest to anions (Sb or Sn) with the typical axial ratio of c/a = 1.25. The QS(x) dependence of ¹¹⁹ Sn in 3d-metal antimonides in the 0 ≤ x ≤ 0.1 concentration range can be used to determine x – the concentration of transition metal excess relative to the stoichiometric composition.     

Long range one-dimensional ordering of lead phthalocyanine monolayer on InSb(1 0 0) (4 × 2)/c(8 × 2)

Sub-monolayer and monolayer of lead phthalocyanine deposited on InSb(1 0 0) (4 × 2)/c(8 × 2) surface have been investigated by scanning tunneling microscopy and low energy electron diffraction. Molecules first adsorb on the indium rows of the (4 × 2)/c(8 × 2) structure in the [1 1 0] direction and diffuse at the surface in order to form two-dimensional islands. The molecule-substrate interaction stabilizes the PbPc molecules on the In rows. It weakens the interaction between molecules located in adjacent rows resulting in numerous gliding planes between the molecular chains, in the direction parallel to the rows. At monolayer completion, a long-range one-dimensional order is adopted by the molecules in the [1 1 0] direction.     

Low temperature InSb(0 0 1) surface structure studied by scanning tunneling microscopy

InSb(0 0 1) surface prepared by ion sputtering and thermal annealing has been studied in the temperature range from 77 K up to 300 K using scanning tunneling microscopy (STM). At 300 K the surface is c(8 × 2) reconstructed as indicated by low energy electron diffraction and STM images, and its structure appears to be consistent with the “ζ-model” recently proposed for this surface. Upon lowering of the temperature below 180 K a new phase appears on the surface. This phase is characterized by the surface structure period doubling along [1 1 0], lowering the surface symmetry from c2mm to p2, and appearance of structural domains. Possible origins of the new phase are discussed.     

Chemical route for formation of intermetallic Zn4Sb3 phase

Synthesis of intermetallic zinc antimonide phases via low temperature solution route was investigated. Trial experiments were carried out under inert atmosphere at 70 °C using metallic Zn, SbCl₃ and NaBH₄ as reactants and tetrahydrofuran (THF), dimethylsulfoxide (DMSO) as organic media. Powder X-ray analysis confirmed the nucleation and growth of ZnSb phases in presence of excess Zn. SEM analysis revealed the existence of core-shell structure comprising of Zn core and Sb shell. Such particles get transformed into Zn₄Sb₃ crystalline phases upon thermal treatment at 300 °C/6 h in a silica tube closed under high secondary vacuum.     

High sensitivity Hall devices with AlSb/InAs quantum well structures

AlSb/InAs quantum well (QW) structures and InAs films on GaAs (001) substrates were grown by molecular beam epitaxy (MBE). We investigated the dependence of electron mobility and two-dimensional electron gas (2DEG) concentration on the thickness of an InAs channel. It is found that electron mobility as high as 19050 cm2·V-1·s-1 has been achieved for an InAs channel of 22.5 nm. The Hall devices with high sensitivity and good temperature stability were fabricated based on the AlSb/InAs QW structures. Their sensitivity is markedly superior to Hall devices of InAs films.