紫外光引发环氧树脂的下行前线聚合行为

采用紫外光(UV)引发法研究了221型脂环族环氧树脂的下行前线聚合行为.探讨了光引发剂、热引发剂用量和预热温度等对聚合前线的推动速率Vf和前线引发时间ti的影响,并利用傅里叶变换红外光谱(FTIR)、热重(TG)和差示扫描量热(DSC)等对固化物结构和热性能进行了表征.研究结果表明,提高光引发剂浓度、热引发剂浓度或预热温度,均可提高聚合前线的推动速率Vf,缩短引发时间ti.采用该技术制备的环氧树脂固化物具有较好的均一性及热稳定性.     

Unraveling the Mechanisms of the Excited-State Intermolecular Proton Transfer (ESPT) for a D-π-A Molecular Architecture

Precise revealing the mechanisms of excited-state intermolecular proton transfer (ESPT) and the corresponding geometrical relaxation upon photoexcitation and photoionization remains a formidable challenge. In this work, the compound (E)-4-(((4H-1,2,4-triazol-4-yl)imino)methyl)-2,6-dimethoxyphenol (TIMDP) adopting a D-π-A molecular architecture featuring a significant intramolecular charge transfer (ICT) effect has been designed. With the presence of perchloric acid (35 %), TIMDP can be dissolved through the formation of a HClO₄–H₂O–OH(TIMDP)–N(TIMDP) hydrogen-bonding bridge. At the ground state, the ICT effect is dominant, giving birth to crystals of TIMDP. Upon external stimuli (e.g., UV light irradiation, electro field), the excited state is achieved, which weakens the ICT effect, and significantly promotes the ESPT effect along the hydrogen-bonding bridge, resulting in crystals of [HTIMDP]⁺ ⋅ [H₂O] ⋅ [ClO₄]⁻. As a consequence, the mechanisms of the ESPT can be investigated, which distorted the D-π-A molecular architecture, tuned the emission color with the largest Stokes shift of 242 nm, and finally, high photoluminescence quantum yields (12 %) and long fluorescence lifetimes (8.6 μs) have achieved. These results not only provide new insight into ESPT mechanisms, but also open a new avenue for the design of efficient ESPT emitters.     

The effect of UV light on the thermooxidative stability of linear low density polyethylene films crosslinked by ionizing radiation

The effect of ultraviolet (UV) light on the thermooxidative stability of Linear Low Density Polyethylene(LLDPE) films was studied. LLDPE was stabilized with phenolic type antioxidant known as Irganox 1010, hindered amine light stabilizer known as Chimmasorb 944 and phenolic type gamma stabilizer. The influence of these additives on the thermooxidative stability of gamma and UV irradiated LLDPE were investigated by isothermal Differential Scanning Calorimeter (DSC). The oxidation induction time (OIT) experiments indicate that antirad free LLDPE films which contains antioxidant and UV stabilizer are more sensitive to gamma and UV radiation. On the other hand, films which contain antirad and irradiated to different doses of γ-radiation demonstrated improved thermooxidative stability.     

Borocyclopropanation of Styrenes Mediated by UV‐light Under Continuous Flow Conditions

Herein, we report a user‐friendly and metal‐free UV‐A light mediated borocyclopropanation of styrenes using continuous flow technology. A broad range of styrene derivatives can be cyclopropanated in good yields within 1 h residence time to produce highly valuable cyclopropylboronate esters with modest to good diastereoselectivities. The reaction is also applicable to α‐substituted styrenes. Mechanistic studies support a photoredox process during which xanthone, a well‐known organic photosensitizer, can easily reach a photoexcited state that is available for both an oxidative and a reductive quenching.     

Development of novel detection reagent for simple and sensitive determination of trace amounts of formaldehyde and its application to flow injection spectrophotometric analysis

In this paper, a novel detection reagent for formaldehyde determination is proposed, and is applied to a simple and highly sensitive flow injection method for the spectrophotometric determination of formaldehyde. The method is based on the reaction of formaldehyde with methyl acetoacetate in the presence of ammonia. The increase in the absorbance of the reaction product was measured at 375 nm. An inexpensive light emitting diode (LED)-based UV detector (375 nm) was, for the first time, used. Under the optimized experimental conditions, formaldehyde in an aqueous solution was determined over the concentration range from 0.25 to 20.0 × 10⁻⁶ M with a liner calibration graph; the limit of detection (LOD) of 5 × 10⁻⁸ M (1.5 μg L⁻¹) was possible. The relative standard deviation of 12 replicate measurements of 5 × 10⁻⁶ M formaldehyde was 1.2%. Maximum sampling throughput was about 21 samples/h. The effect of potential interferences such as metals, organic compounds and other aldehyde was also examined. The analytical performance for formaldehyde determination was compared with those obtained by the conventional acetylacetone method, which uses visible absorption spectrophotometry. Finally, the proposed method was successfully applied to the determination of formaldehyde in natural water samples.     

Stability and Photoisomerization of Stilbenes Isolated from the Bark of Norway Spruce Roots

Stilbenes or stilbenoids, major polyphenolic compounds of the bark of Norway spruce (Picea abies L. Karst), have potential future applications as drugs, preservatives and other functional ingredients due to their antioxidative, antibacterial and antifungal properties. Stilbenes are photosensitive and UV and fluorescent light induce trans to cis isomerisation via intramolecular cyclization. So far, the characterizations of possible new compounds derived from trans-stilbenes under UV light exposure have been mainly tentative based only on UV or MS spectra without utilizing more detailed structural spectroscopy techniques such as NMR. The objective of this work was to study the stability of biologically interesting and readily available stilbenes such as astringin and isorhapontin and their aglucones piceatannol and isorhapontigenin, which have not been studied previously. The effects of fluorescent and UV light and storage on the stability of trans stilbenes were assessed and the identification and characterisation of new compounds formed during our experiments were carried out by chromatographic (HPLC, GC) and spectroscopic techniques (UV, MS, NMR). The stilbenes undergo a trans to cis isomerisation under extended UV irradiation by intramolecular cyclisation (by the formation of a new C-C bond and the loss of two hydrogens) to phenanthrene structures. The characterised compounds are novel and not described previously.     

Cu/Ti超晶格薄膜的强紫外反射性能研究

采用直流磁控溅射方法制备了一维二组元Cu/Ti周期超晶格金属薄膜 ,研究了基片温度、膜周期数、基片取向与紫外反射的关系。当基片加热温度为 470℃时 ,在硅 (10 0 )晶面上生长的 30层Cu/Ti膜 ,层间膜厚控制在1∶3、膜总厚度控制为 30 0nm时 ,所制备的超晶格薄膜在 5°入射角下对 2 0 0nm的紫外光 ,其反射率可高达 90 %。     

Ultrasound processed nanoemulsion: A comparative approach between resveratrol and resveratrol cyclodextrin inclusion complex to study its binding interactions,antioxidant activity and UV light stability

Resveratrol is a naturally occurring therapeutic molecule used for treatment of diseases caused by oxidative stress. This investigation elucidates the advantages of fabrication of size controlled resveratrol inclusion complex. This has been done by encapsulating resveratrol-cyclodextrin inclusion complex in a phospholipid stabilized nanoemulsion formulated by ultrasonication emulsification method. The prepared nanoemulsion has been compared with resveratrol encapsulated nanoemulsion system. The morphology of the resveratrol nanoemulsion and inclusion complex nanoemulsion have been observed using transmission electron microscopy with average size 20.41 ± 3.41 and 24.48 ± 5.70 nm respectively. The nanoemulsion showed good loading and release efficiency. The radical diminishing potential of resveratrol and its inclusion complex has been compared in nanoemulsion. The effect of UV irradiation (365 nm) on resveratrol in different solvent systems (ethanol, water and nanoemulsion) indicated that nanoemulsion prevents degradation of resveratrol. Efforts have also been made to explore the interactions between bovine serum albumin and resveratrol in nanoemulsion.     

氯掺杂提高多壁碳纳米管的电导率

通过氯气吸附, 制备了掺氯多壁碳纳米管(Cl₂-MWNTs)复合材料, 在低温、高温和紫外光照射条件下掺氯, 紫外光照射下掺氯制备的复合材料电导率最高, 和未掺氯MWNTs相比, 电导率提高到原来的5倍以上. 用热重、红外吸收光谱、紫外-可见吸收光谱、拉曼光谱和X光电子能谱分析研究掺氯碳纳米管中氯和MWNTs间的相互作用, 结果表明: 掺氯后MWNTs中π电子向氯转移, 氯与MWNTs形成共轭体系, π电子的离域性增强, 提高了复合材料的电导率.     

三聚氰胺溶液的荧光光谱实验研究

对三聚氰胺溶液和含三聚氰胺的奶粉溶液在紫外光激励下产生的荧光光谱进行了实验研究.讨论了其产生机理和谱线特性,并对奶粉溶液和含三聚氰胺奶粉溶液的荧光光谱进行了纵坐标比值变换分析.结果表明,三聚氰胺溶液在波长为240 nm左右的紫外光激励下能产生较强的荧光,荧光峰分别位于350 nm和370 nm附近;在同一波长紫外光激励下,含三聚氰胺奶粉溶液与奶粉溶液的荧光光谱相比,荧光主峰位置由328 nm变为350 nm,其他荧光峰的位置基本保持不变,荧光相对强度在370 nm处最大.