丁基罗丹明B-Bi(Ⅲ)-SCN~--PVA-Tween-80体系荧光熄灭法测定痕量铋

本文研究了在PVA和Tween 80存在下,铋离子与硫氰酸钾和丁基罗丹明B形成缔合型三元配合物,使丁基罗丹明B的荧光熄灭,建立了痕量铋的荧光分析新方法。工作曲线线性范围为0～5.0μg/25mL。方法灵敏度高,ε_(588)为3.5×10~5L·mol~(-1)·cm~(-1),操作简便。用于铸铁中痕量铋的测定,结果满意。     

在增溶剂存在下硫氰酸盐-结晶紫光度法测定微量钨

在明胶存在下,钨与硫氰酸盐和结晶紫生成可溶性三元缔合物,最大吸收波长为540nm,表现摩尔吸光系数为4.1×10~5 L·mol~(-1)·cm~(-1),钨在0～11μg/25ml范围内服从比尔定律。方法已用于测定岩石中微量钨。     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Simultaneous kinetic determination of thiocyanate and sulfide using eigenvalue ranking and correlation ranking in principal component-wavelet neural network

In this work, two toxic compound, sulfide and thiocyanate were determined simultaneously using kinetic spectrophotometry. These anions have shown the catalytic effects on the reaction between iodine and azide. Since the system was nonlinear, a nonlinear model, principal component-wavelet neural network (PC-WNN) was used as the multivariate calibration method. The principal component analysis was used to decrease the dimension of the original matrix. In other words, the scores of the PCs, 5, instead of the original variables, 301, were used as the input for the model. Two methods were used to select the most relevant principal components: eigenvalue ranking and correlation ranking. In this work, eigenvalue and correlation ranking methods have shown better results for thiocyanate and sulfide, respectively, and it can be concluded that these methods are complementary. The WNN has several advantages relative to other types of neural network such as better convergence ability. The data set was divided to calibration, prediction and validation sets. Each set was selected so that the concentrations of the analytes were approximately covered the entire ranges of the analytes. Mean relative error for thiocyanate and sulfide in validation set were 8.5 and 10.6, respectively. Thiocyanate and sulfide can be determined in the range of 60–700 ng ml⁻¹ and 20–400 ng ml⁻¹, respectively. The proposed method was applied for the determination of sulfide and thiocyanate in real samples such as tap, waste and river waters with satisfactory results.     

联苯甲酰双缩氨基脲硫氰酸根硝酸根混合阴离子配位钕(Ⅲ)配合物的合成与结构

合成了联苯甲酰双缩氨基脲硫氰酸根、硝酸根混合配位的钕(Ⅲ)配合物。在此配合物中只有1个链状配体,另有2个硫氰酸根、1个硝酸根和1个水分子参与配位。总配位数是9。晶体结构分析表明,该配合物晶体属三斜晶系,P空间群。晶胞参数a=10。866(2),b=13.687(3),c=15.433(3),α=98.75(4)°,β=107.64(5)°,γ=112.14(5)°。最终偏差因子R=0.075。用INDO方法计算结果表明:NCS对Nd(Ⅲ)的配位比=C基对Nd(Ⅲ)的配位强。     

以硫醚为主链的螯合树脂研究Ⅳ．含硫代硫酸根、叠氮基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物分别与硫代硫酸钠，叠氮化钠反应，制得四种侧链带有硫代硫酸根或叠氮基的新型螯合树脂。它们对贵金属离子具有较高的吸附容量和较好的吸附选择性。     

硫氰酸铈(Ⅲ)与三缩四乙二醇配合物[Ce(C_8H_(18)O_5)(NCS)_3(H_2O)]的合成及晶体结构

合成了硫氰酸铈(Ⅲ)与三缩四乙醇配合物[Ce(C_8H_(18)O_5)(NCS)_3(H_(2)O)].晶体结构分析表明,该配合物晶体属三斜晶系,P(?)空间群.晶胞参数:a=0.8816(3)nm,b=1.0465(2)nm,c=1.2490(2)nm,α=86.46(1)°,β=70.90(2)°,γ=66.37(2)°,ν=0.9943nm~(3),Z=2.D_(计算)=1.769cm~(3),最终偏差因子R=0.049.