Coherent control of stimulated emission inside one dimensional photonic crystals: strong coupling regime

The present paper discusses the stimulated emission, in strong coupling regime, of an atom embedded inside a one dimensional (1D) Photonic Band Gap (PBG) cavity which is pumped by two counter-propagating laser beams. Quantum electrodynamics is applied to model the atom-field interaction, by considering the atom as a two level system, the e.m. field as a superposition of normal modes, the coupling in dipole approximation, and the equations of motion in Wigner-Weisskopf and rotating wave approximations. In addition, the Quasi Normal Mode (QNM) approach for an open cavity is adopted, interpreting the local density of states (LDOS) as the local density of probability to excite one QNM of the cavity; and therefore rendering this LDOS dependent on the phase difference of the two laser beams. In this paper we demonstrate that the strong coupling regime occurs at high values of the LDOS. In accordance with the results of the literature, the emission probability of the atom decays with an oscillatory behaviour, so that the atomic emission spectrum exhibits two peaks (Rabi splitting). The novelty of this work is that the phase difference of the two laser beams can produce a coherent control of both the oscillations for the atomic emission probability and, as a consequence, of the Rabi splitting in the emission spectrum. Possible criteria to design active delay lines are finally discussed.     

修正的Szász算子的强逆不等式

本文证明修正的Szász算子逼近的强型正定理和逆定理,从而得到该算子逼近特征的刻画.所获结果类似于Szász算子相应的结果.     

LIDAR mapping of ozone-episode dynamics in Paris and intercomparison with spot analyzers Supplementary material available at http://link.springer.de/journals/apb

Continuous mapping of an ozone episode in Paris in June 1999 has been performed using a differential absorption lidar system. The 2D ozone concentration vertical maps recorded over 33 h at the Champ de Mars are compiled in a video clip that gives access to local photochemical dynamics with unprecedented precision. The lidar data are compared over the whole period with point monitors located at 0-, 50-, and 300-m altitudes on the Eiffel Tower. Very good agreement is found when spatial resolution, acquisition time, and required concentration accuracy are optimized. Sensitivity to these parameters for successful intercomparison in urban areas is discussed. Received: 11 February 2002 / Published online: 14 March 2002     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Temperature effects on supercontinuum generation using a continuous-wave Raman fiber laser

We describe the effect of temperature variations on supercontinuum (SC) generation in optical fibers using a continuous-wave (CW) Raman fiber laser as a pump. We achieve supercontinuum generation by pumping only ∼2 W of power into a 7 km-long nonzero dispersion-shifted fiber (NZDSF) in the region of small anomalous dispersion. In these conditions, the supercontinuum builds up basically on modulational instability and Raman. At room temperature, the supercontinuum covers effectively the S, C and L transmission bands defined by the International Telecommunication Union (ITU). Temperature tuning of the fiber environment provides a means of tuning the fiber dispersion, and thus a means of changing the width and shape of the supercontinuum spectrum. We demonstrate a 27% increase in the 10-dB SC width. We believe that the application of this new tuning mechanism to other experimental configurations using pulsed sources might be used to produce extremely broad supercontinuums.     

Phase-Locked Fibre Array for Coherent Combination and Atmosphere Aberration Compensation

We report a fibre amplifier array that not only achieves coherent beam combination by compensation of phase noises of fibre amplifier, but also accomplishes correction of atmosphere aberration. It is of master-oscillatormultiple-amplifier （MOPA） configuration, which can be phase-locked by the multidither principle or heterodyne detection principle. First laboratory experiments of atmosphere aberration compensation of a three-element fibre amplifier array are reported. The atmosphere aberration is created by a phase screen in the experiment. The phase changes of the beam, which are introduced by the fibre amplifier and the phase screen, are both detected by the heterodyne detection method. Phase modulators are controlled to compensate for the phase in the three paths. No matter whether there is a phase screen producing atmosphere aberration or not, the dim dynamic interference fringes in the far field turn to a clear and stable pattern, and the peak intensity is maximized. It is indicated that the fibre amplifier array is phase-locked, and coherent combination of the three beams is achieved. It can be used not only to obtain high power fibre laser array but also in laser space communication.     

A geometric formula for Haefliger knots

Haefliger has shown that a smooth embedding of the (4k−1)-sphere in the 6k-sphere can be knotted in the smooth sense. In this paper, we give a formula with which we can detect the isotopy class of such a Haefliger knot. The formula is expressed in terms of the geometric characteristics of an extension, analogous to a Seifert surface, of the given embedding. In particular, the Hopf invariant associated to the extension plays a crucial role. This leads us to a new characterisation of Haefliger knots.     

Fabrication of pellicle beam splitters for optical bus application

The optical bus architecture for on-board applications requires a number of optical splitters with precise split ratios to route part of the input signal. Since hollow metal waveguide provides well collimated beams with very small gap loss, it opens the possibility of inserting discrete optical beam splitters (taps). The optical tap requires low excess loss, polarization insensitivity, temperature stability, minimized walk-off of the propagating beam, and cost effective manufacturing. By benefiting from the mature interference coating technology for polarization insensitivity and temperature stability, we design a pellicle beam splitter based on a static microelec tro-mechanical system (MEMS) and develop processes to fabricate pellicle splitters using wafer level bonding of silicon and glass substrates, with subsequent thinning to 20 μm. With the approaches described in this paper, we have demonstrated optical beam splitters with excess loss of less than 0.17 dB that operate at a data rate of 10 Gb/s showing a clean eye diagram while providing controlled split ratio and polarization insensitivity. We have demonstrated a high yielding MEMS based silicon processing platform which has the potential to provide a cost effective manufacturing solution for optical beam splitters.     

Tunable microwave photonic filter based on chirped fiber gratings working with a single optical carrier at constant wavelength

This paper presents a tunable transversal filter working with a single optical carrier at constant wavelength. The filter consists of a set of chirped gratings whose time delay is tuned with respect to the emission wavelength of a fiber laser by a piezoelectric actuator; extra lengths of fiber are inserted in the filter arms in order to avoid interferences between signals reflected in different gratings. Two and three taps filters are experimentally demonstrated, the filters transfer function is electronically tuned within the free spectral range.     

Dynamic single-mode and modulation characteristics analyses for λ/4 phase-shifted distributed feedback lasers with chirped grating

The dynamic single-mode and modulation performance of λ/4 phase-shifted distributed feedback laser diode with chirped grating (QWS-CG-DFB) are analyzed theoretically. The numerical simulation shows that, in contrast to purely QWS-DFB laser, the enhanced dynamic single-mode suppression ratio (SMSR) can be reached by QWS-CG-DFB laser. Under the smaller biasing current, the modulation band-width in presence of chirped grating is narrower, this difference shrinks for larger biasing current. For large signal modulation, the chirped grating is helpful to increase the output extinction ratio, but worsens the frequency chirping. The good dynamic characteristic can be obtained by selecting system parameters reasonably.