PSO-LSSVM对LIBS定量分析精度的提高

针对土壤定量分析受基体效应影响大，LIBS定量分析精度不佳等问题，采用粒子群算法对LSSVM进行优化，提高模型的精确度。选取Pb Ⅰ 405.78 nm和Cr Ⅰ 425.44 nm作为分析谱线进行分析。采集十二个不同浓度样品的特征光谱，每个浓度样品在不同点采集20组数据，将其中17组数据设为训练集，3组数据设为预测集，用LSSVM和PSO-LSSVM两种方法建立定标模型。对比两种模型的拟合相关系数（R2）、训练集均方根误差（RMSEC）和预测集均方根误差(RMSEP)。由于自吸收效应的影响，随着浓度的增加，预测值逐渐低于实际值，LSSVM定标模型的拟合程度较低，无法达到实验要求，模型性能有待提高。利用粒子群算法对LSSVM的模型参数惩罚系数和核函数参数进行优化，得到最佳的参数组合，Pb元素为(8 096.8, 138.865 7)，Cr元素为(4 908.6, 393.563 5)，用最佳的参数组合构建LSSVM的定标模型。相比于LSSVM，PSO-LSSVM定标模型的精确度更高，Pb和Cr元素的R2提高到了0.982 8和0.985 0，拟合效果明显提升。Pb和Cr元素的训练集均方根误差由0.026 0 Wt%和0.027 2 Wt%下降到0.022 4 Wt%和0.019 1 Wt%，预测集均方根误差由0.101 8 Wt%和0.078 8 Wt% 下降到0.045 8 Wt%和0.042 0 Wt%，模型的稳定性进一步提高。说明PSO-LSSVM算法能够更好地降低土壤基体效应和自吸收效应带来的影响，提高分析结果的精确度与稳定性。     

Quantitative leak test for microholes and microtears in whole gloves and glove pieces

The current leak tests for gloves are qualitative. The developed quantitative leak test uses vacuum pressure to draw measured volumes of water to detect microholes/tears in whole gloves and glove pieces. A modified plastic vacuum desiccator interfaced with a Frazier air permeability tester allowed exposure of disposable unsupported/unlined/powderless Kimtech Blue nitrile to 50 mL of water for glove pieces or to 600 mL within a whole glove at vacua of 8–9 in. (20–23 cm) and 11–12 in. (28–30 cm) water gauge, respectively. Punctures of known dimensions were made before testing in specific glove areas using 21-, 22-, 26-, 30-, and 33-gauge needles (outer/inner diameters in micrometres of 873/514, 794/413, 635/311, 476/127, 318/159 and 238/133, respectively). The length of the punctures varied from 0.13 ± 0.01 to 0.80 ± 0.11 mm. Flow rates of water through the holes/tears ranged from 2.5 ± 0.4 to 106 ± 7 mL/min for glove pieces. For whole gloves, the ranges were from 31 ± 9 to 543 ± 110 mL/min in the palm area; and 0.23 ± 0.06 to 82 ± 18 mL/min in the finger/fingertip area. The method quantified tear lengths as short as 0.13 ± 0.01 mm.     

Insights into the electrochemical degradation of sulfamethoxazole and its metabolite by Ti/SnO2-Sb/Er-PbO2 anode

Electrochemical degradation of sulfamethoxazole (SMX) and its metabolite acetyl-sulfamethoxazole (Ac-SMX) by Ti/SnO₂-Sb/Er-PbO₂ were investigated. Results indicated that the electrochemical degradation of SMX and Ac-SMX followed pseudo-first-order kinetics. The rate constants of SMX and Ac-SMX were 0.268 and 0.072 min^-1 at optimal current density of 10 and 14 mA/cm², respectively. Transformation products of SMX and Ac-SMX were identified and the possible degradation pathways, including the cleavage of S-N bond, opening ring of isoxazole and nitration of amino group, were proposed. Total organic carbon removal of SMX was nearly 63.2% after 3 h electrochemical degradation. 22.4% nitrogen of SMX was transformed to NO₃^-, and 98.8% sulfur of SMX was released as SO₄^2-. According to quantitative structure-activity relationship model, toxicities of SMX and Ac-SMX to aquatic organisms significantly decreased after electrochemical degradation. Electric energy consumption for 90% SMX and Ac-SMX degradation was determined to be 0.58-8.97 and 6.88-44.19 Wh/L at different experimental conditions, respectively. Compared with parent compound SMX, the metabolite Ac-SMX is more refractory and toxic, which emphasizes the importance of taking its metabolites into account when investigating the disposal of pharmaceuticals from wastewater.     

Cyclodextrin derivatives functionalized highly sensitive chiral sensor based on organic field-effect transistor

Novel highly sensitive chiral organic field-effect transistors(COFET)were developed by directly assembling imidazolium3,5-dimethylphenylcabamoylated-β-cyclodextrin(lm^+-Ph-β-CD)and 3,5-dimethylphenylcarbamoylated-β-CD(Ph-β-CD)respectively onto the semiconductor layer as sensing units.The Im+-Ph-β-CD/COFET afforded better enantioselectivity and a lowest detection concentration of10^-18 L/mol as well as the potentiality in quantitative analysis of commercial medicines.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

Improved thromboresistance and analytical performance of intravascular amperometric glucose sensors using optimized nitric oxide release coatings

In this work, nitric oxide (NO) release coatings designed for intravenous amperometric glucose sensors are optimized through the use of a polylactic acid (PLA) layer doped with a lipophilic diazeniumdiolated species that releases NO through a proton-driven mechanism. An Elast-Eon E2As polyurethane coating is used to both moderate NO release from the sensor surface and increase the sensor''s linear detection range toward glucose. These sensors were evaluated for thromboresistance and in vivo glucose performance through implantation in rabbit veins. By maintaining NO flux on a similar scale to endogenous endothelial cells, implanted glucose sensors exhibited reduced surface clot formation which enables more accurate quantitative glucose measurements continuously. An in vivo time trace of implanted venous sensors demonstrated glucose values that correlated well with the discrete measurements of blood samples on a benchtop point-of-care sensor-based instrument. The raw measured currents from the implanted glucose sensors over 7 h time periods were converted to glucose concentration through use of both a one-point in vivo calibration and a calibration curve obtained in vitro within a bovine serum solution. Control sensors, assembled without NO release functionality, exhibit distinctive surface clotting over the 7 h in vivo implantation period.     

表面增强拉曼光谱法快速定量分析食品中福美双、二氰蒽醌和灭蝇胺的残留

基于表面增强拉曼光谱(SERS)技术,以Au@SiO2和Au纳米增强粒子建立了食品中福美双、二氰蒽醌和灭蝇胺的快速定量分析方法,3种农药的检出限分别为1.4μg/L、0.020mg/L和0.030mg/L。采用加标回收试验对方法进行评价,福美双在生活饮用水和碳酸梨汁饮料中的回收率在104.5%~107.1%之间,相对标准偏差为4.0%~6.2%;二氰蒽醌在生活饮用水中的回收率在81.1%~100.0%之间,相对标准偏差为4.1%~7.8%,灭蝇胺在碳酸饮料和果皮中测定的相对标准偏差均小于11.0%,结果表明该方法准确可靠,精密度高。方法成功用于加标碳酸果汁饮料、果皮表面二氰蒽醌及灭蝇胺的检测,为快速定量检测食品中农残提供了SERS方法。     

定量核磁共振波谱法同时测定中药虎杖中白藜芦醇和虎杖苷的含量

建立了定量核磁共振波谱法同时测定虎杖中白藜芦醇和虎杖苷的方法。样品用80%乙醇和丙酮两次超声提取净化,再用定量核磁共振波谱法测定。考察了样品预处理和核磁共振实验条件对测定结果的影响,选择氘代二甲亚砜-重水(10∶1,V/V)为溶剂,用基准物质邻苯二甲酸氢钾标定的2,3,5-三碘苯甲酸为内标,选择脉冲延迟时间为5 s,采样次数为32次。定量峰为6.388~6.391(白藜芦醇:H-2,6,d,2H)和6.322~6.330(虎杖苷:H-4,t,1H)。结果表明,NMR测定的精密度均小于0.6%,线性相关系数(r)均大于0.999,白藜芦醇和虎杖苷的检出限分别为0.23和0.24 g/L,定量限分别为0.69和1.57 g/L,包括样品提取过程的回收率分别为97.7%~103.5%(RSD=2.4%)和94.5%~99.2%(RSD=1.6%),显示出定量核磁共振法在中药定量时的可靠性。实际测定4种虎杖饮片及配方颗粒样品中白藜芦醇和虎杖苷含量分别为3.57~5.69 mg/g和12.73~24.07 mg/g。