Enhanced magnetoconductivity and electrical property of MWCNT-CdS nanocomposite embedded in polyaniline

PANI/MWCNT-CdS nanocomposites with different content of CdS wt.% has been synthesized by the chemical oxidative in-situ polymerization reaction of aniline in the presence of multi-walled carbon nanotubes (MWCNT). TEM, XRD, FTIR, and TGA studies were done for the structural and thermal characterization of the samples respectively. The particle size of CdS nanoparticles distributes in between 2.7 and 4.8 nm. XRD spectrum reveals that the co-existence of MWCNT, CdS in PANI matrix, where CdS forms a hexagonal structure. TGA result shows that nanocomposite becomes more thermally stable with the increase in CdS content. The dc electrical transport property of PANI/MWCNT-CdS nanocomposites has been investigated within a temperature range 77 ≤ T ≤ 300 K. The dc conductivity follows a 3D variable range hopping (VRH) model. A large magnetoconductivity change (19%) is observed for 2 wt% CdS content in PANI/MWCNT-CdS, which is explained by the wave function shrinkage model.     

表面增强拉曼散射光谱研究聚苯胺纳米棒的构象转变

采用电化学沉积法制备了聚苯胺(Polyaniline,PANI)纳米棒、树枝状银和纳米颗粒银基体。并利用表面增强拉曼散射光谱技术(Surface-enhanced Raman Scattering,SERS)研究了PANI纳米棒的分子链在Ag金属表面的构象变化。实验结果表明由于Ag金属表面的等离子共振效应,PANI分子中N原子的孤对电子与Ag的自由电子产生共轭效应,使得PANI分子链上的电荷重新分布,结果 C—H面内弯曲振动频率和C—C键的伸缩频率向低波数方向移动(蓝移);拉曼散射频率增强的基团在金属表面倾向垂直于分子链的主轴,拉曼散射频率减弱的基团在金属表面倾向平行于分子链主轴。     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

Morphological and dimensional control via assembly of polyaniline crystals

A facile and general route to a new generation of polyaniline(PANI)-citric acid(CA) crystals such as 2D nanoplates, 2D nanosheets and 3D microrods self-assembled by the π-π stacking interaction is reported. Dramatic, 3D rectangular shaped microrods and 2D nanosheets are single crystals indicated by SAED patterns and HRTEM images. Moreover, the method does not depend on any specific equipment or heating, cooling and complex procedures. The novel polyaniline crystals will be useful for next generation organic electronics such as nano-transistors.     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.     

A highly sensitive dopamine sensor based on a polyaniline/reduced graphene oxide/Nafion nanocomposite

A nanocomposite of polyaniline/reduced graphene oxide (PANI-rGO) was synthesized using a hydrothermal method. The product was characterized by FT-IR, Raman spectra, XRD, SEM and TEM. Then the hybrid material of PANI-rGO and Nafion (PANI-rGO-NF) was prepared and used to modify glassy carbon electrode for the trace determination of dopamine (DA) employing differential pulse voltammetry (DPV). It was found that the hybrid material showed good catalytic activity toward the oxidation of DA, and no response to ascorbic acid (AA) and uric acid (UA) was observed, suggesting a high selectivity of the sensor toward DA. The peak currents were linearly correlated with the concentration of DA in the range from 0.05 μmol/L to 60.0 μmol/L (R=0.996) and 60.0 μmol/L to 180.0 μmol/L (R=0.996) with a detection limit of 0.024 μmol/L (S/N=3). The modified electrode also exhibited excellent repeatability and stability.     

Superparamagnetic POT/Fe3O4 nanoparticle composites with supported Au nanoparticles as recyclable high-performance nanocatalysts

A novel method has been developed to successfully synthesize Fe₃O₄ nanoparticles with tunable size and morphology supported on shells of poly(o-Toluidine)(POT) hollow microspheres. The as-prepared POT/Fe₃O₄ nanoparticle composites can be used as novel and magnetic-responsive catalyst supports to produce highly efficient and recyclable noble metal catalysts. The size of Fe₃O₄ nanoparticles supported on shells of POT hollow microspheres can be tuned from 4 to 12 nm by changing the concentration of Fe ions. The roles of the doping acid of POT and Zeta potentials of Fe₃O₄ nanoparticles and POT in the formation of the POT/Fe₃O₄ nanoparticle composites were discussed. Furthermore, gold nanoparticles that were supported on the as-synthesized POT/Fe₃O₄ nanoparticle composites have been achieved by utilizing the reactivity of POT towards Au ions. The size of gold nanoparticles can be tuned by altering the concentration of HAuCl₄. Finally, the catalytic activity of the obtained POT/Fe₃O₄/Au composites for 4-nitrophenol (4NP) reduction is investigated. The results demonstrate that such magnetic-responsive polymer-supported gold nanoparticles can be easily recovered and reused five times still remains high catalytic performance, which indicate their potential applications in the field of catalysis.     

石墨烯/聚苯胺复合材料的制备及其电化学性能

以苯胺和氧化石墨烯(GO)为原料, 采用电化学方法制备了石墨烯/聚苯胺(GP)复合材料. 利用X射线衍射(XRD)、扫描电镜(SEM)、拉曼(Raman)光谱、X射线光电子能谱分析(XPS)对其结构、微观形貌进行了表征,并对复合材料电化学性能进行了测试. 结果表明, 复合材料保持了石墨烯的基本形貌, 聚苯胺颗粒均匀地分散在石墨烯表面, 复合材料在500 mA·g^-1的电流密度下比电容达到352 F·g^-1, 1000 mA·g^-1下比电容为315 F·g^-1, 经过1000 次的充放电循环后容量保持率达到90%, 远大于石墨烯和聚苯胺单体的比电容. 复合材料放电效率高, 电解质离子易于在电极中扩散和迁移.     

Polymerization of N,N-Dimethylaminopropyl-Acrylamide Through Hydrogen Transfer Induced by the Propagation of the Polyacrolein Anion

The anionic polymerization of acrolein (AL) with N, N-dimethylamino-propylacrylamide (DMAPA) in the presence of water was investigated in tetrahydrofuran, benzene, and ethanol at 0°C in a nitrogen atmosphere. The resulting polymers were found to be essentially vinyl polymers with one DMAPA attached and an aldehyde side chain. From observations of the polymerization process by ¹H NMR, we find that polymerization was initiated by the hydroxyl anion formed in the thermodynamic equilibrium between the amine of DMAPA and water. The hydrogen transfer reaction of DMAPA was caused by the propagating poly-AL anion. On the other hand, the monomer reactivity ratios and the Q₂-e₂values of DMAPA were determined by the free-radical copolymerization of styrene (St, M₁) with DMAPA and AIBN as initiator.