SUNIST装置中磁探针出气率测量

通过出气率测量装置评价了SUNIST装置的内部磁探针出气特性,实验结果表明其出气量和出气气体成分不足以影响SUNIST真空特性。其后的放电实验验证了这一结论。     

Thermal desorption gas chromatography with mass spectrometry study of outgassing from polymethacrylimide foam (Rohacell®)

Polymethacrylimide foams are used as light structural materials in outer‐space devices; however, the foam closed cells contain volatile compounds that are outgassed even at low temperatures. These compounds ignite as plasmas under outer‐space radiation and the intense radio‐frequency fields used in communications. Since plasmas may cause spacecraft fatal events, the conditions in which they are ignited should be investigated. Therefore, qualitative and quantitative knowledge about polymethacrylimide foam outgassing should be established. Using thermogravimetric analysis, weight losses reached 3% at ca. 200°C. Thermal desorption gas chromatography with mass spectrometry detection was used to study the offgassed compounds. Using successive 4 min heating cycles at 125°C, each one corresponding to an injection, significant amounts of nitrogen (25.3%), water (2.6%), isobutylene (11.3%), tert‐butanol (2.9%), 1‐propanol (11.9%), hexane (25.3%), propyl methacrylate (1.4%), higher hydrocarbons (11.3%), fatty acids (2.2%) and their esters (1.3%), and other compounds were outgassed. Other compounds were observed during the main stage of thermal destruction (220–280°C). A similar study at 175°C revealed the extreme difficulty in fully outgassing polar compounds from polymethacrylimide foams by baking and showed the different compositions of the offgassed atmosphere that can be expected in the long term.     

SUNISTװ���д�̽������ʲ���

通过出气率测量装置评价了SUNIST装置的内部磁探针出气特性,实验结果表明其出气量和出气气体成分不足以影响SUNIST真空特性。其后的放电实验验证了这一结论。     

真空紫外辐射对碳/环氧复合材料性能的影响

 介绍了真空紫外线的模拟和射流式真空紫外辐射模拟设备的工作原理、技术参数及特点，并利用该设备及其它分析手段对环氧树脂浇铸体(EP648)和碳/环氧复合材料(C/E648)在真空紫外线辐照作用下的出气、质量损失率、层间剪切强度和表面状态的变化进行了研究。试验结果表明：真空紫外线辐照导致材料产生明显的出气效应，质量损失率呈现先递增后趋于平缓的趋势；17 280esh辐照剂量下，EP648的质量损失是C/E648的3.4倍，C/E648的层间剪切强度与辐照前相比下降了13.3%；环氧树脂破损较重，而碳纤维表面状态基本完好，并对内部的环氧树脂起到一定的保护作用。     

Thermal Stability and Outgassing Behaviors of High-nickel Cathodes in Lithium-ion Batteries

LiNiO₂-based high-nickel layered oxide cathodes are regarded as promising cathode materials for high-energy-density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high-Ni cathodes, which are critical factors in determining their overall safety performance. A comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high-Ni cathodes.     

Effect of outgassing temperature on the performance of porous materials

This work illustrates the consequences of an inadequate outgassing temperature of porous materials of different nature (zeolites and activated carbons) on their performance on gas storage and wastewater remediation. Outgassing at low temperature in thermally stable materials leads to an incomplete cleaning of the porous surface; as a result, the gas storage ability based on adsorption isotherms is underestimated. In contrast, outgassing at elevated temperature in temperature-sensitive materials provokes irreversible changes in their composition and structure, which also affects strongly their stability and performance. Two examples illustrating wrong interpretation data on CO₂ capture on zeolites and wastewater treatment using activated carbons are addressed. The results show how the performance of a given material can be significantly modified or misunderstood after the outgassing pretreatment.