Generalization of Carré equation

The present work offers new equations for phase evaluation in measurements. Several phase shifting equations with an arbitrary but constant phase shift between captured intensity signs are proposed. The equations are similarly derived as the so-called Carré equation. The idea is to develop a generalization of Carré equation that is not restricted to four images. Errors and random noise in the images cannot be eliminated, but the uncertainty due to their effects can be reduced by increasing the number of observations. An experimental analysis of the mistakes of the technique was made, as well as a detailed analysis of mistakes of the measurement. The advantages of the proposed equation are its precision in the measures taken, speed of processing and the immunity to noise in signs and images.     

Formulation of moiré fringes based on spatial averaging

The use of moiré technique in measurements often involves locating the position of moiré fringe and in some cases determining its profile. Due to intensity fluctuation in the fringe pattern, these measurements are accompanied by some errors. It is possible to define a smoothed version of the original fringe pattern and then formulate the related subject in accordance with the characteristics of this new pattern. This procedure reduces these types of errors and gives a well-defined profile of the fringes. In this paper a formulation of moiré phenomenon based on spatial averaging is presented which, without ignoring any of frequencies, leads to a smooth profile.     

Low energy RBS and SIMS analysis of the SiGe quantum well

The Ge concentration in a MBE grown SiGe and the depth of the quantum well has been quantitatively analysed by means of low energy Rutherford backscattering (RBS) and secondary ion mass spectrometry (SIMS). The concentrations of Si and Ge were supposed to be constant, except for the quantum well, where the nominal germanium concentration was at 5%. Quantitative information was deduced out of raw data by comparison to SIMNRA simulated spectra. With the knowledge of the response function of the SIMS instrument (germanium delta (δ) layer) and using the model of forward convolution (point to point convolution) it is possible to determine the germanium concentration and the thickness of the analysed quantum well out of raw SIMS data.     

Investigations of corrosion phenomena on gold coins with SIMS

In order to establish a new handling procedure for contaminated coins, the Coin Cabinet and the Conservation Science Department of the Kunsthistorisches Museum, Vienna, initiated a research project on corrosion effects of gold coins. By now, investigations on historic and contemporary coins included optical microscopy, scanning electron microscopy (SEM), Auger electron microscopy (AES), X-ray photoelectron microscopy (XPS), and electrochemical methods showing the distribution of pollutants.This work focuses on secondary ion mass spectrometry (SIMS) investigations merely showing the distribution of electronegative elements, such as sulfur, oxygen, and chlorine on the surface. Sulfur is highly suspected of causing the observed corrosion phenomena, and is indeed enriched near polluting splints. Since SIMS is a destructive method, the investigated samples are test coins with intentionally added impurities. These coins were manufactured in cooperation with the Austrian Mint. They were treated with potassium polysulfide (K₂S_x) for 8 h gaining a rapid corrosion of the surface.SIMS mass spectra, depth profiles, and images were done (a) at non-polluted areas, (b) near polluted areas with slight coloring, and (c) directly at polluting stains showing enrichments of sulfur and chlorine. Due to the success of these investigations further studies on historic coins are intended.     

Comparing the chemical properties of evaporated and sputtered niobium films on oxidized Si(1 0 0) wafers - preparation of oxynitride films

Five hundred nanometers of niobium films have been deposited on silicon(1 0 0) wafers with 100 or 300 nm thermally grown oxide by electron beam evaporation and DC magnetron sputtering. SEM and AFM investigations revealed smaller crystallites and rougher surfaces for the evaporated films. The differences in film morphology resulted in lower reflection intensities in XRD for the as-deposited evaporated films. In order to investigate the influence of the structural properties on their chemical reactivities, in a first set of experiments the films were nitrided with molecular nitrogen by rapid thermal processing (RTP) at varying temperatures. In another set of experiments after nitridation in nitrogen at 1000 °C an oxidation step in molecular oxygen at varying temperatures followed. The films showed different reactivities, leading to different rates of nitridation and oxidation. Sputtered films were less reactive than the evaporated films, deduced from the sequence of reaction products dependent on reaction temperature. XRD data indicated that oxynitrides have formed. Elemental depth profiles were measured by secondary ion mass spectrometry (SIMS).     

Refractive and geometric lens characterization through multi-wavelength digital speckle pattern interferometry

Physical parameters of different types of lenses were measured through digital speckle pattern interferometry (DSPI) using a multimode diode laser as light source. When such lasers emit two or more longitudinal modes simultaneously the speckle image of an object appears covered of contour fringes. By performing the quantitative fringe evaluation the radii of curvature as well as the refractive indexes of the lenses were determined. The fringe quantitative evaluation was carried out through the four- and the eight-stepping techniques and the branch-cut method was employed for phase unwrapping. With all these parameters the focal length was calculated. This whole-field multi-wavelength method does enable the characterization of spherical and aspherical lenses and of positive and negative ones as well.     

Laser vaporization of carbon in the presence of carbon dioxide

2 . The dependence of the ion production on the laser ablation parameters is investigated and the expansion dynamics of the ablated species is studied through time and space resolved measurements of the ion yield. We discuss our observations on the basis of reactions involving neutral and ionized carbon-based species. Received: 11 March 1997/Accepted: 30 June 1997     

Isotope-selective femtosecond wave packet dynamics: The rare molecule

For the first time, the femtosecond real-time vibrational dynamics of the rare ^41,41K₂ isotope, excited to the electronic state, could be selectively studied by means of time-resolved three photon ionization. A vibrational period of fs is determined. Superimposed, a beat structure with a period of 20 ps is observed. A detailed Fourier analysis reveals a strong band of three lines centered around 65.5 cm^-1. A significant perturbation of the wave packet caused by spin-orbit coupling of the A and the crossing state is found. This perturbation is the reason for the fast dephasing of the initially generated wave packet within about 10 ps. The spectrogram of the real-time data shows total revivals of the wave packet at 20 ps and 40 ps. Fractional revivals are found for times around 10 ps and 30 ps. Due to high intensity effects a remarkable slightly broadened line at 90 cm^-1 appears and can be assigned to the wave packet propagation generated in the dimer's ground state by impulsive stimulated Raman scattering. Revivals of this ground state wave packet are found at 17ps and 34ps. A comparison with other isotopes of K₂ is given. Received: 9 February 1998 / Revised: 15 May 1998 / Accepted: 2 June 1998