PS-b-P (DMS-stat-VMS)嵌段聚合物的制备及性能

采用活性阴离子聚合方法,以仲丁基锂为引发剂,以苯乙烯、六甲基环三硅氧烷（D3）和2,4,6-三乙烯基-2,4,6-三甲基环三硅氧烷（V3）为反应单体,分步聚合制备了聚苯乙烯-b-聚（二甲基硅氧烷-stat-乙烯基甲基硅氧烷）[PS-b-P（DMS-stat-VMS）]嵌段聚合物.采用傅里叶变换红外光谱、氢核磁共振谱及凝胶渗透色谱对共聚物的化学结构、分子量及分子量分布进行了表征,并通过扫描电子显微镜、原子力显微镜及接触角等测试方法研究了共聚物各链段组分对共聚物形貌及表面亲疏水/油性的影响.结果表明,所制备的共聚物分子量分布较窄,由于各组分性能的差异而呈现出微相分离结构,同时该共聚物保留了PS-b-PDMS原有的表面性质,为设计结构多样性及性能优异的聚硅氧烷共聚物提供了新思路.     

MICROPHASE SEPARATED STRUCTURES AND PROPERTIES OF PDMS-MDI-PEG COPOLYMER SURFACE

A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation ext...     

The permeation of gases through symmetric and asymmetric (Loeb-Type) cellulose acetate membranes

Significant differences have been observed in the steady-state permeation of gases through symmetric and asymmetric (Loeb-type) cellulose acetate membranes. The studies were made with O₂, N₂, Ar, Kr, Xe, and CO₂ in the temperature range from -5 to 85°C and at subatmospheric pressures. The differences in permeation behavior may reflect structural differences between the symmetric membranes and the dense surface layer (“skin”) of the asymmetric membranes. The overall mechanism of gas permeation through the symmetric membranes appears to be one of “solution-diffusion,” similar to that observed with many other nonporous polymeric membranes. In the case of the asymmetric membranes, this mechanism is probably modified by the presence of micropores or other imperfections in the dense surface layer. Cellulose acetate exhibits two second-order transitions in the presence of the penetrant gases, one between 60 and 70°C and the other near 15°C. The transitions were observed with both types of membranes.     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D₂O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 °C in a temperature range of transparent sol below 30 °C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W_p > 3.5% (w/v), corresponding to opaque gel above 30 °C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 °C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.     

变温红外光谱研究多嵌段聚氨脂脲的微相分离行为

用傅里叶变换红外光谱方法研究了热处理对由聚环氧丙烷聚醚多元醇、３．５－二乙基甲苯二胺和４，４－二苯基甲烷二异氰酸酯组成的多嵌段聚氨酯脲（ＳＰＵＵ）的微相分离行为的影响．从室温逐步升温到３１０℃的过程中，氨基甲酸酯键（ＵＴ）之间形成的氢键大量解离，而脲键（ＵＡ）之间形成的、具有平面状双分叉结构的氢键在１３０～２００℃范围却大量生成；从３１０℃缓慢冷却到室温后，部分游离的ＵＴ重新形成氢键，而硬段之间形成的ＵＡ氢键的含量又有所增加．结果表明：高温热处理可以有效地提高ＳＰＵＵ的微相分离程度．     

聚醚氨酯的红外酰胺Ⅰ.谱带分析

通过对聚醚氨酯红外光谱酰胺-Ⅰ谱带的二级微商及傅里埃自解卷积处理,发现了位于1715cm~(-1)的新组分并可归属于无序的相间界面。应用差减光谱及曲线拟合对热处理试样的光谱谱带进行分析表明聚醚氨酯的加热/冷却过程是与可逆的无序/有序化过程及微相混合/分离过程有关的。新发现的1715cm(-1)组分强度的变化与无序/有序化过程是一致的。     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

Selective ordering of surfactant modified gold nanoparticles in a diblock copolymer

Ordered aggregation of thiol-passivated Au nanoparticles in a diblock copolymer polystyrene-b-poly(methyl methacrylate) has been observed. The morphology of the diblock copolymer/Au-nanocomposite was dependent on the composition of the thiol modifier. For the thiol modifier that does not preferentially interact with one of the blocks, a perpendicular (relative to the substrate) lamellar morphology is maintained. However, for a thiol with a surfactant structure similar to one of the blocks, we observed a parallel lamellar morphology and speculate that the nanoparticles have localized at the microdomain interface. These conclusions are based on transmission electron microscopy, angle-dependent X-ray photoelectron microscopy and tensiometry. These results are consistent with theoretical predictions on the hybrid systems composed of block copolymers and nanoparticles.     

THE VISCOELASTIC EFFECT ON THE FORMATION OF MESO-GLOBULAR PHASE OF DILUTE HETEROPOLYMER SOLUTIONS

Linear homopolymer chains in poor solvent exist either as individual crumpled single chain globules or asmacroscopic precipitate, depending on whether the solution is in the one- or the two-phase region. However, linearheteropolymer chains in dilute solution might be able to form stable mesoglobules made up of a limited number of chains ifthe degree of amphiphilicity of the chain is sufficiently high and the experimental conditions are appropriate. The self-assembly of block copolymers in a selective solvent is typical of such examples. In practice, the formation of stablemesoglobules can be directly related to the formation of novel polymeric nanopaticles in solution. In this article, we willaddress the formaton of mesoglobular phase not only on the basis of thermodynamics, but also from a kinetic point of view,which leads to the discussion of how viscoelasticity can affect the phase behavior of heteropolymer chains in dilute solution.The formation and stabilization of several different kinds of novel polymeric nanopedicles will be used to illustrate ourdiscussion.