Aryl vinyl cyclopropane Cope rearrangements

While the divinyl cyclopropane Cope rearrangement is well-known, and has been broadly applied in synthesis, examples of the aryl vinyl cyclopropane Cope rearrangement are less common and generally limited in scope or reaction yield. The aryl vinyl cyclopropane Cope rearrangement gives access to the benzocycloheptene scaffold, which is present in a variety of naturally occurring and medicinally relevant products. Herein we report a method to obtain either of two regioisomeric benzocycloheptene products via an aryl vinyl cyclopropane Cope rearrangement, featuring additive-controlled regioselectivity. Mechanistic studies indicate a dynamic equilibration of cyclopropane stereoisomers, followed by rearrangement of the cis diastereomer.     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

ECNU-13: A High-Silica Zeolite with Three-Dimensional and High-Connectivity Multi-Pore Structures for Selective Alkene Cracking

A high-silica zeolite ECNU-13 (Si/Al=23) with a new three-dimensional (3D) pore system and a nanosized morphology has been developed, consisting of multitudes of 10-membered ring (10-R) medium pores and one set of 8-R small pores. A phase-discrimination strategy was proposed to synthesize ECNU-13 by regulating the gel compositions and nucleation processes that were used for preparing 12-R large-pore germanosilicate IM-20 with the known UWY topology. The crystallization was directed towards forming one set of single four-ring (s4r) composite building units together with one set of double four-ring (d4r) rather than two different types of d4r units in IM-20. The electron crystallographic investigations elucidated that the ECNU-13 structure was composed of two kinds of polymorphs as a result of distinct atomic positionings in s4r units. In catalytic cracking of 1-butene, ECNU-13 exhibited high propene selectivity (55.6 %) and propene to ethylene molar ratio (>4.7) superior to well-studied conventional ZSM-5 zeolite catalyst.     

Superprotonic Conductivity of MOFs Confining Zwitterionic Sulfamic Acid as Proton Source and Conducting Medium

A few metal–organic frameworks (MOFs), which typically use strong acids as proton sources, display superprotonic conductivity (≈10⁻¹ S cm⁻¹); however, they are rare due to the instability of MOFs in highly acidic conditions. For the first time, we report superprotonic conductivity using a moderately acidic guest, zwitterionic sulfamic acid (HSA), which is encapsulated in MOF-808 and MIL-101. HSA acts not only as a proton source but also as a proton-conducting medium due to its extensive hydrogen bonding ability and zwitterion effect. A new sustained concentration gradient method results in higher HSA encapsulation compared to conventional methods, producing 10HSA@MOF-808-(bSA)₂ and 8HSA@MIL-101. These MOFs show impressive superprotonic conductivity of 2.47×10⁻¹ and 3.06×10⁻¹ S cm⁻¹, respectively, at 85 °C and 98 % relative humidity, and maintain stability for 7 days.     

Elongated Bacterial Pili as a Versatile Alignment Medium for NMR Spectroscopy

In NMR spectroscopy, residual dipolar couplings (RDCs) have emerged as one of the most exquisite probes of biological structure and dynamics. The measurement of RDCs relies on the partial alignment of the molecule of interest, for example by using a liquid crystal as a solvent. Here, we establish bacterial type 1 pili as an alternative liquid-crystalline alignment medium for the measurement of RDCs. To achieve alignment at pilus concentrations that allow for efficient NMR sample preparation, we elongated wild-type pili by recombinant overproduction of the main structural pilus subunit. Building on the extraordinary stability of type 1 pili against spontaneous dissociation and unfolding, we show that the medium is compatible with challenging experimental conditions such as high temperature, the presence of detergents, organic solvents or very acidic pH, setting it apart from most established alignment media. Using human ubiquitin, HIV-1 TAR RNA and camphor as spectroscopic probes, we demonstrate the applicability of the medium for the determination of RDCs of proteins, nucleic acids and small molecules. Our results show that type 1 pili represent a very useful alternative to existing alignment media and may readily assist the characterization of molecular structure and dynamics by NMR.     

Process intensification for synthesis of triglycerides of capric acid using green approaches

The present research focuses on intensified synthesis of tricaprin by esterification reaction between capric acid and glycerol catalysed by dry amberlyst-15 using ultrasonication approach. Effect of several reaction conditions like molar ratio, reaction temperature, and amberlyst-15 loading on the rate of conversion has been studied. Effect of ultrasonic conditions like duty cycle and irradiation time on the intensified synthesis is investigated. Recyclability of amberlyst-15 is studied to make process more economical. It is investigated that the optimum reaction conditions which gave maximum conversion of 95% were molar ratio of capric acid: glycerol as 3:5, reaction temperature 90 ​°C, 4% amberlyst −15 loading. It was further investigated that ultrasonic conditions which gave intensified synthesis were 70% duty cycle and irradiation time of 120 ​min. The ultrasonic assisted process was compared with conventional synthesis. Conventional synthesis gave 30% yield in 120 ​min and 82% in 18 ​h. Amberlyst-15 was successfully reused for 13 cycle without any change in the conversion (%) of reaction.     

Medium effect on dielectric relaxation behaviors of 4A zeolite bulk dispersion system

Dielectric spectra of 4A zeolite particles bulked in deionized water (4A/W) or cyclohexane (4A/C) were measured respectively under different temperatures, and two dielectric relaxations were found in both of 4A/W and 4A/C. Because of existence of water molecules in pores, both low and high frequency relaxation times (τ_LFR and τ_HFR) of 4A/Wdecreasedmore sharply than 4A/C with increasing temperature. According to the temperature dependence of τ_LFR and τ_HFR, the activation energies of Na⁺ interacting with framework under hydrated and dehydrated environments were calculated respectively, and the original properties of Na⁺ in dehydrated zeolite were obtained by analyzing the dielectric properties of 4A/C. Furthermore, a transient state of Na⁺ motion with temperature was found in 4A/C system.     

弹性介质中圆柱壳动力响应研究的现状和展望

一、引言在地震动情况下,地下结构与地面结构相比较其动力响应是十分不同的。以桥梁和水堤为例,对这类结构的设计,水平惯性力是一个极为重要的因素。可是,对于地下结构,以埋管为例,惯性荷载主要由其周围的土介质所承受。地下管道系统的地震破坏,     

Testing Aluminum Alloy from Quasi-static to Dynamic Strain-rates with a Modified Split Hopkinson Bar Method

An aluminum alloy¹ was tested at quasi-static to dynamic strain-rates (from 10⁻¹ to 5 10³ s⁻¹), using a single measuring device, a modified Split Hopkinson Bar. A wave separation technique [Bussac et al., J Mech Phys Solids 50:321–350, 2002] based on the maximum likelihood method was applied to process the strain and velocity measurements recorded at various points on each bar. With this method, it is possible to compute the stress, strain, displacement and velocity at any point on the bar. Since the measurement time is unlimited, the maximum strain measured in a given specimen no longer decreases with the strain-rate, as occurs with the classical Split Hopkinson Bar method. ¹The authors wish to thank the automobile manufacturer who provided samples of the alloy used in this study. For reasons of commercial and industrial confidentiality, we were not informed about the composition of this alloy.     

Monodisperse Crosslinked Microsphere Polymer Particles by Dispersion Copolymerization of Glycidyl Methacrylate and Divinylbenzene

Monodisperse polyglycidyl methacrylate (PGMA) microsphere particles crosslinked with divinylbenzene crosslinker were prepared by single-stage dispersion copolymerization in ethanol medium. 1 wt% of DVB was successfully incorporated due to the costabilizing effect of GMA as a surface-active monomer. This behavior may indicate that the fast formation of stable primary particle leads to monodispersity. The average particle sizes and the particle size distributions increased with the DVB crosslinker concentration. The effects of two different variables (initiator concentration, crosslinker concentration) on the rate of dispersion copolymerization have been investigated. With the initiator concentration, the polymerization procedure mainly depended on the dual natures of general dispersion polymerization, in the crosslinked state. Up to 1 wt% DVB, the particle growth was controlled by the monomer diffusion from the continuous phase into the particle phase.