Chemometric analysis of groundwater quality data of alluvial aquifer of Gangetic plain, North India

Water quality data set from the alluvial region in the Gangetic plain in northern India, which is known for high fluoride levels in soil and groundwater, has been analysed by chemometric techniques, such as principal component analysis (PCA), discriminant analysis (DA) and partial least squares (PLS) in order to investigate the compositional differences between surface and groundwater samples, spatial variations in groundwater composition and influence of natural and anthropogenic factors. Trilinear plots of major ions showed that the groundwater in this region is mainly of Na/K-bicarbonate type. PCA performed on complete data matrix yielded six significant PCs explaining 65% of the data variance. Although, PCA rendered considerable data reduction, it could not clearly group and distinguish the sample types (dug well, hand-pump and surface water). However, a visible differentiation between the water samples pertaining to two watersheds (Khar and Loni) was obtained. DA identified six discriminating variables between surface and groundwater and also between different types of samples (dug well, hand pump and surface water). Distinct grouping of the surface and groundwater samples was achieved using the PLS technique. It further showed that the groundwater samples are dominated by variables having origin both in natural and anthropogenic sources in the region, whereas, variables of industrial origin dominate the surface water samples. It also suggested that the groundwater sources are contaminated with various industrial contaminants in the region.     

Presence of nonylphenol, octyphenol and bisphenol a in two aquifers close to agricultural, industrial and urban areas

Active endocrine disruptors (nonylphenol, octylphenol and bisphenol A) were analysed in 2 aquifers and the corresponding surface waters. They are compounds widely used in industrial processes. The objective of this study was to determine the leaching potential of these compounds in groundwaters and to eventually correlate these levels with surface water samples. The areas sampled were agricultural, close to large cities and with an important industrial activity in the surrounding area. Samples (200 mL) were extracted using off-line SPE with polymeric OASIS 60 mg cartridges. Analyses were performed by gas chromatography-mass spectrometry (GC-MS) using selected ion monitoring (SIM) and full scan for quantification and unequivocal identification, respectively. This paper reports the detection limit for the compounds studied (from 0.001 to 0.030 μg L⁻¹), and method performance as regards to linearity (0.01–1.3 μg L⁻¹), reproducibility (less than 9%) and recovery (84 to 95%). The results from a monitoring program revealed the presence of the target compounds in all samples analysed, at levels of 0.07 and 1.9 μg L⁻¹. The presence of these compounds in groundwater was attributed basically to degradation of inert ingredients present in the formulation of many pesticides or to the increasing application of sludge in agricultural practice, although the infiltration of industrial run-off and wastewater disposal cannot be disregarded.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

Monitoring and Evolution of the Pollution by Volatile Organic Compounds (Vocs) in the Groundwaters of The Najerilla River Basin (Spain)

VOCs were detected and identified in the water of several wells in the area of Nájera (La Rioja). The past uncontrolled spills from an important painting and varnishing industry and from other smaller ones devoted to the manufacture of furniture and varnishing activities were the sources of the VOCs plume detected in this aquifer. This article shows the results obtained in the monitoring and assessment of the pollution at 18 sampling points for more than a year. It has allowed us to study the evolution of the different pollutants and the influence of a remediation process applied by the company in the main pollution source. The analytical method is based on headspace-solid-phase microextraction (SPME) using a 75-μm carboxen-polydimethylsiloxane fibre. Quantification was carried out by gas chromatography with flame ionization detection. This method has allowed us to determine the 13 VOCs identified in the polluted underground samples providing good sensitivity (LOD between 0.1 and 6.0 ng/mL) and reproducibility (r.s.d. less than 10%).     

双电极法现场快速检测地下水和湖水中碳酸氢根和碳酸根

地下水和湖水中碳酸氢根( HCO-3)和碳酸根( CO2-3)含量是地球化学碳行为和碳循环的重要表征,但两种离子的浓度易受环境影响而改变,因此,地下水和湖水中HCO-3和CO2-3真实含量的测定一直是个难题。实验利用CO2的水解平衡,通过pH电极和二氧化碳电极联用,建立了HCO-3和CO2-3现场快速测定的新方法,解决了地下水和湖水中HCO-3和CO2-3真实含量的测定难题。研究结果表明,在pH=4.8±0.1的底液中, HCO-3和CO2-3的线性范围分别为0.027~570 mg/L和1.25×10-8~39.7 mg/L。共存的金属离子、强酸阴离子(K+、Na+、Mg2+、Cl-、SO2-4,100 mg/L)、弱酸阴离子和弱酸(HSO-3、NO-2、HOAc,50 mg/L)对测定干扰小于5%。实际水样加标实验回收率在95.2%~99.2%之间,相对标准偏差为2.6%~3.7%。与酸碱滴定法进行对比,本方法的准确性良好。但方法受温度影响,因此标准溶液与样品应在同一温度下测量。总体而言,双电极法灵敏、快速、经济且电极携带方便、操作简单、对环境要求不高,十分适合现场和室内一般自然水体的快速检测。本方法已成功应用于青海省地下水和青海湖湖水中HCO-3和CO2-3的现场测定。实验表明,海东地区地下水样品pH在6.4~7.4之间,HCO-3含量为234~4096 mg/L,CO2-3含量为0.16~1.89 mg/L；青海湖湖水样品pH≈8.7,HCO-3含量范围在1.36~1.86 g/L,CO2-3含量在32.3~43.9 mg/L,与文献结果吻合。     

Determination of benzotrifluoride derivative compounds in groundwater

Two simple analytical methods for the simultaneous determination and quantification of benzotrifluoride and eight chlorinated, amino and nitro benzotrifluoride derivatives in groundwater are proposed. Benzotrifluoride, 4-chlorobenzotrifluoride, 2,4-dichlorobenzotrifluoride and 3,4-dichlorobenzotrifluoride, were extracted by Purge-and-Trap on the basis of their volatile properties, while 3-aminobenzotrifluoride, 4-nitrobenzotrifluoride, 3-amino-4-chlorobenzotrifluoride, 3-nitro-4-chlorobenzotrifluoride and 4-chloro-3,5-dinitrobenzotrifluoride extractions were done with an automated SPE system. The analytical separations and detections were performed with two different GC systems, both equipped with single quadrupole mass spectrometer as detector. The LOD ranges for the two methods were 0.002–0.005 μg L⁻¹ and 0.01–0.07 μg L⁻¹, respectively. Both extraction methods were developed using spiked Milli-Q water and were then demonstrated with groundwater samples collected during autumn 2008. The areas of groundwater collection were polluted due to an episode of improper industrial soil disposal and consequent leakage of aliphatic and aromatic, fluorinated chemicals into the groundwater. This work eventually revealed the presence of several benzotrifluoride compounds most of them, like dichloro- and amino-derivatives, never been reported as environmental contaminants.     

Quantitative determination of toluene,ethylbenzene, and xylene degradation products in contaminated groundwater by solid-phase extraction and in-vial derivatization

Benzylsuccinic acid (BSA) and methylbenzylsuccinic acids (mBSAs) are unambiguous indicators of anaerobic toluene and ethylbenzene/xylene degradation, and so the determination of these compounds in landfill leachates and contaminated groundwater is highly relevant. Samples were diluted to <0.8?mS?cm^?1 in order to reduce their ionic strength, and subsequently extracted through strong anion exchange disks, followed by simultaneous in-vial elution and methylation. A detection limit of 0.1?µg?L^?1 was obtained for 100?mL samples. Using this method, 19.3?µg?L^?1 of BSA was measured in a landfill leachate, and low µg?L^?1 levels of all of the mBSAs were measured in gasoline-contaminated groundwater. The results were compared with the findings of BSAs at 16 other contaminated sites, and BSAs as indicators of biodegradation were evaluated. The estimation of biodegradation rates based on parent hydrocarbons and BSA concentrations or ratios is questionable. However, the degradation products serve as good qualitative in situ indicators for anaerobic biodegradation in contaminated groundwater.     

Isotopes in groundwater as indicators of climate changes

Isotopes of the water molecule (δ¹⁸O and δ²H) are a well-used tool for investigating groundwater origin and history (i.e. tracing the recharge conditions over time, processes occurring during infiltration of rainwater towards aquifers and those involved in the water-rock interaction, and mixing of different waters).This review covers several large European aquifers (Portugal, France, UK, Switzerland, Germany, Hungary, and Poland), which were investigated in terms of their recharge conditions, and the story of the groundwater at a large scale, involving recent, Holocene and Pleistocene components and their eventual mixing.     

Determining eosin as a groundwater migration tracer by capillary electrophoresis/laser-induced fluorescence using a multiwavelength laser

Measurements for determining of the path of groundwater migration remain an important tool in the overall assessment of environmental processes and transport of pollutants. This paper examines a multiwavelength laser for the determination of eosin, a groundwater tracer, using capillary electrophoresis/laser-induced fluorescence (CE-LIF) at excitation wavelength 514.5 nm. Eosin was one of four dyes used in a study of adjacent resource conservation and recovery act (RCRA) and Superfund sites (created by the comprehensive environmental response, compensation, and liability act) that routinely relied on spectrofluorimetry for determination as we have previously reported. However, the improved specificity of CE-LIF is further illustrated in this work applied to the analysis of adsorbent pads placed in monitoring wells after dye injection and flushing from injection wells. The multiwavelength laser provided the capability to analyze for several dyes with one laser. The advantages/disadvantages of CE-LIF versus spectrofluorimetry are discussed. Spectrofluorimetry is fast and sensitive and will likely continue to be the primary workhorse technique. CE-LIF could provide confirmation when greater specificity is needed in a regulatory context.     

Genetic algorithms and cellular automata in aquifer management

A groundwater management problem is presented involving pumping cost minimization with both well discharges and well locations as decision variables. A grid of candidate well locations is set up and optimal arrangements of wells are sought within this discrete space. A genetic algorithm approach is presented with the following particular features: (a) A suitable scaling is applied to the objective function in order to alleviate its regionally flat behavior. (b) No penalty functions are involved in constraint handling. Instead, the feasible region is transformed into a rectangular domain. The transformation introduced is proved to be bijective. (c) A binary representation of well configurations is presented and compared to a combinatorial one. The binary representation necessitates the introduction of specially designed genetic operators. Besides purely genetic algorithms, the concept of cellular automaton is introduced as the basis of an alternative formulation of the optimization problem. The lattice of the cellular automaton provides the discrete set of candidate well positions. The well configuration is represented by a group of agents occupying an equal number of lattice sites. The agents change positions as dictated by the structure of the automaton and, also, by an associated genetic algorithm, which directs the evolution of the whole scheme toward an optimal configuration. An improved performance of this approach is noted and discussed in comparison to the purely genetic algorithm schemes of the present work. A simulated annealing approach is also applied to the same problem for comparison purposes. Finally, a new and more efficient hybrid annealing–genetic approach is introduced and discussed.